Specifying "input-enable" on a MSM GPIO is a no-op for the most
part. The only thing it really does is to explicitly force the output
of a GPIO to be disabled right at the point of a pinctrl
transition. We don't need to do this and we don't typically specify
"input-enable" unless there's a good reason to. Remove it.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7a987bc9b758..23e656e51904 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -534,7 +534,6 @@ sd_cd: sd-cd {
sw_ctrl: sw-ctrl {
pins = "gpio86";
function = "gpio";
- input-enable;
bias-pull-down;
};
};
--
2.35.0.rc2.247.g8bbb082509-goog
