Current gpio's in IDP file are not mapping properly, seeing device timedout failures. Corrected pcie gpio entries in dtsi files. Fixes: 4e24d227aa77 ("arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board") Signed-off-by: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++------------------ arch/arm64/boot/dts/qcom/sc7280.dtsi | 10 ++++++++- 2 files changed, 24 insertions(+), 21 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 78da9ac..84bf9d2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -243,9 +243,6 @@ perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&nvme_3v3_regulator>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; }; &pcie1_phy { @@ -360,6 +357,21 @@ /* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie1_reset_n { + pins = "gpio2"; + + drive-strength = <16>; + output-low; + bias-disable; +}; + +&pcie1_wake_n { + pins = "gpio3"; + + drive-strength = <2>; + bias-pull-up; +}; + &pm7325_gpios { key_vol_up_default: key-vol-up-default { pins = "gpio6"; @@ -436,23 +448,6 @@ function = "gpio"; }; - pcie1_reset_n: pcie1-reset-n { - pins = "gpio2"; - function = "gpio"; - - drive-strength = <16>; - output-low; - bias-disable; - }; - - pcie1_wake_n: pcie1-wake-n { - pins = "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - qup_uart7_sleep_cts: qup-uart7-sleep-cts { pins = "gpio28"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index d4009cc..2e14c37 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -1640,7 +1640,7 @@ phy-names = "pciephy"; pinctrl-names = "default"; - pinctrl-0 = <&pcie1_clkreq_n>; + pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>; iommus = <&apps_smmu 0x1c80 0x1>; @@ -3272,6 +3272,14 @@ bias-pull-up; }; + pcie1_reset_n: pcie1-reset-n { + function = "gpio"; + }; + + pcie1_wake_n: pcie1-wake-n { + function = "gpio"; + }; + dp_hot_plug_det: dp-hot-plug-det { pins = "gpio47"; function = "dp_hot"; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation