[PATCH 2/2] arm64: dts: qcom: msm8994-angler: Use common DTS for RPM

[Petr Vorel <petr.vorel@xxxxxxxxx>]

Signed-off-by: Petr Vorel <petr.vorel@xxxxxxxxx>
---
Hi,

the downstream code had:

&pm8994_l18 { /* Sensor VDD */
	regulator-min-microvolt = <2850000>;
	regulator-max-microvolt = <2850000>;
	regulator-always-on;
	qcom,init-voltage = <2850000>;
	status = "okay";
};
=> same as now in msm8994-rpm.dtsi

&pm8994_lvs2 {
	qcom,init-enable = <1>;
	regulator-always-on;
	status = "okay";
};
 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index 0e3dd48f0dbf..7b9796d896fa 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@xxxxxxxxx>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@xxxxxxxxx>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
+#include "msm8994-rpm.dtsi"
 
 /* Angler's firmware does not report where the memory is allocated */
 /delete-node/ &cont_splash_mem;
@@ -41,3 +42,8 @@ serial@f991e000 {
 &tlmm {
 	gpio-reserved-ranges = <85 4>;
 };
+
+&vreg_lvs2a_1p8 {
+	regulator-always-on;
+	status = "okay";
+};
-- 
2.34.1