RE: [PATCH V3 1/4] mmc: sdhci: Capture eMMC and SD card errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Thanks for  the Review.

Please find the inline comments.

Thanks,
Sajida

-----Original Message-----
From: Adrian Hunter <adrian.hunter@xxxxxxxxx> 
Sent: Friday, January 21, 2022 12:38 PM
To: Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu@xxxxxxxxxxx>; Asutosh Das (QUIC) <quic_asutoshd@xxxxxxxxxxx>; ulf.hansson@xxxxxxxxxx; agross@xxxxxxxxxx; bjorn.andersson@xxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Cc: stummala@xxxxxxxxxxxxxx; vbadigan@xxxxxxxxxxxxxx; Ram Prakash Gupta (QUIC) <quic_rampraka@xxxxxxxxxxx>; Pradeep Pragallapati (QUIC) <quic_pragalla@xxxxxxxxxxx>; sartgarg@xxxxxxxxxxxxxx; nitirawa@xxxxxxxxxxxxxx; sayalil@xxxxxxxxxxxxxx; Liangliang Lu <luliang@xxxxxxxxxxxxxx>; Bao D . Nguyen <nguyenb@xxxxxxxxxxxxxx>
Subject: Re: [PATCH V3 1/4] mmc: sdhci: Capture eMMC and SD card errors

On 20/01/2022 19:26, Shaik Sajida Bhanu wrote:
> Add changes to capture eMMC and SD card errors.
> This is useful for debug and testing.
> 
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@xxxxxxxxxxx>
> Signed-off-by: Liangliang Lu <luliang@xxxxxxxxxxxxxx>
> Signed-off-by: Sayali Lokhande <sayalil@xxxxxxxxxxxxxx>
> Signed-off-by: Bao D. Nguyen <nguyenb@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-msm.c |  3 ++
>  drivers/mmc/host/sdhci.c     | 72 ++++++++++++++++++++++++++++++++++++--------
>  include/linux/mmc/host.h     | 31 +++++++++++++++++++
>  3 files changed, 94 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c 
> b/drivers/mmc/host/sdhci-msm.c index 50c71e0..309eb7b 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -128,6 +128,8 @@
>  
>  #define MSM_MMC_AUTOSUSPEND_DELAY_MS	50
>  
> +#define MSM_MMC_ERR_STATS_ENABLE 1
> +
>  /* Timeout value to avoid infinite waiting for pwr_irq */  #define 
> MSM_PWR_IRQ_TIMEOUT_MS 5000
>  
> @@ -2734,6 +2736,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto pm_runtime_disable;
>  
> +	host->mmc->err_stats_enabled = MSM_MMC_ERR_STATS_ENABLE;

Please remove this. SDHCI will enable error stats.

>>>>>> Sure.

>  	pm_runtime_mark_last_busy(&pdev->dev);
>  	pm_runtime_put_autosuspend(&pdev->dev);
>  
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 
> 07c6da1..74b356e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -113,6 +113,8 @@ void sdhci_dumpregs(struct sdhci_host *host)
>  	if (host->ops->dump_vendor_regs)
>  		host->ops->dump_vendor_regs(host);
>  
> +	if (host->mmc->err_stats_enabled)
> +		mmc_debugfs_err_stats_enable(host->mmc);

Please move this to sdhci_setup_host() and call it unconditionally i.e. just

	mmc_debugfs_err_stats_enable(host->mmc);


>>>>>>> mmc_debugfs_err_stats_enable() will set err_state , that means some errors occurred in driver level.
If we move this call to sdhci_setup_host(), then it will set if no errors also right?


>  	SDHCI_DUMP("============================================\n");
>  }
>  EXPORT_SYMBOL_GPL(sdhci_dumpregs);
> @@ -3159,6 +3161,8 @@ static void sdhci_timeout_timer(struct timer_list *t)
>  	spin_lock_irqsave(&host->lock, flags);
>  
>  	if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_REQ_TIMEOUT);

Please remove the 'if ()', i.e. just make it, unconditionally:

		mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_REQ_TIMEOUT);

Same for other calls to mmc_debugfs_err_stats_inc()

>>>>>>>>Sure.

>  		pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",
>  		       mmc_hostname(host->mmc));
>  		sdhci_dumpregs(host);
> @@ -3181,6 +3185,8 @@ static void sdhci_timeout_data_timer(struct 
> timer_list *t)
>  
>  	if (host->data || host->data_cmd ||
>  	    (host->cmd && sdhci_data_line_cmd(host->cmd))) {
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_REQ_TIMEOUT);
>  		pr_err("%s: Timeout waiting for hardware interrupt.\n",
>  		       mmc_hostname(host->mmc));
>  		sdhci_dumpregs(host);
> @@ -3240,11 +3246,18 @@ static void sdhci_cmd_irq(struct sdhci_host 
> *host, u32 intmask, u32 *intmask_p)
>  
>  	if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC |
>  		       SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) {
> -		if (intmask & SDHCI_INT_TIMEOUT)
> +		if (intmask & SDHCI_INT_TIMEOUT) {
>  			host->cmd->error = -ETIMEDOUT;
> -		else
> +			if (host->mmc && host->mmc->err_stats_enabled)
> +				mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_CMD_TIMEOUT);
> +		} else {
>  			host->cmd->error = -EILSEQ;
> -
> +			if (host->cmd->opcode != MMC_SEND_TUNING_BLOCK ||
> +					host->cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) {
> +				if (host->mmc && host->mmc->err_stats_enabled)
> +					mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_CMD_CRC);
> +			}
> +		}
>  		/* Treat data command CRC error the same as data CRC error */
>  		if (host->cmd->data &&
>  		    (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) == @@ -3265,6 
> +3278,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
>  		int err = (auto_cmd_status & SDHCI_AUTO_CMD_TIMEOUT) ?
>  			  -ETIMEDOUT :
>  			  -EILSEQ;
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_AUTO_CMD);
>  
>  		if (sdhci_auto_cmd23(host, mrq)) {
>  			mrq->sbc->error = err;
> @@ -3342,6 +3357,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  				host->data_cmd = NULL;
>  				data_cmd->error = -ETIMEDOUT;
> +				if (host->mmc && host->mmc->err_stats_enabled)
> +					mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_CMD_TIMEOUT);
>  				__sdhci_finish_mrq(host, data_cmd->mrq);
>  				return;
>  			}
> @@ -3375,18 +3392,29 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  		return;
>  	}
>  
> -	if (intmask & SDHCI_INT_DATA_TIMEOUT)
> +	if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  		host->data->error = -ETIMEDOUT;
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_DAT_TIMEOUT);
> +	}
>  	else if (intmask & SDHCI_INT_DATA_END_BIT)
>  		host->data->error = -EILSEQ;
>  	else if ((intmask & SDHCI_INT_DATA_CRC) &&
>  		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
> -			!= MMC_BUS_TEST_R)
> +			!= MMC_BUS_TEST_R) {
>  		host->data->error = -EILSEQ;
> +		if (host->cmd->opcode != MMC_SEND_TUNING_BLOCK ||
> +				host->cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) {
> +			if (host->mmc && host->mmc->err_stats_enabled)
> +				mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_DAT_CRC);
> +		}
> +	}
>  	else if (intmask & SDHCI_INT_ADMA_ERROR) {
>  		pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
>  		       intmask);
>  		sdhci_adma_show_error(host);
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_ADMA);
>  		host->data->error = -EIO;
>  		if (host->ops->adma_workaround)
>  			host->ops->adma_workaround(host, intmask); @@ -3905,20 +3933,40 @@ 
> bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
>  	if (!host->cqe_on)
>  		return false;
>  
> -	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC))
> +	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) 
> +{
>  		*cmd_error = -EILSEQ;
> -	else if (intmask & SDHCI_INT_TIMEOUT)
> +		if (intmask & SDHCI_INT_CRC) {
> +			if (host->cmd->opcode != MMC_SEND_TUNING_BLOCK ||
> +					host->cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) {
> +				if (host->mmc && host->mmc->err_stats_enabled)
> +					mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_CMD_CRC);
> +			}
> +		}
> +	} else if (intmask & SDHCI_INT_TIMEOUT) {
>  		*cmd_error = -ETIMEDOUT;
> -	else
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_CMD_TIMEOUT);
> +	} else
>  		*cmd_error = 0;
>  
> -	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC))
> +	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) {
>  		*data_error = -EILSEQ;
> -	else if (intmask & SDHCI_INT_DATA_TIMEOUT)
> +		if (intmask & SDHCI_INT_DATA_CRC) {
> +			if (host->cmd->opcode != MMC_SEND_TUNING_BLOCK ||
> +					host->cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) {
> +				if (host->mmc && host->mmc->err_stats_enabled)
> +					mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_DAT_CRC);
> +			}
> +		}
> +	} else if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  		*data_error = -ETIMEDOUT;
> -	else if (intmask & SDHCI_INT_ADMA_ERROR)
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_DAT_TIMEOUT);
> +	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
>  		*data_error = -EIO;
> -	else
> +		if (host->mmc && host->mmc->err_stats_enabled)
> +			mmc_debugfs_err_stats_inc(host->mmc, MMC_ERR_ADMA);
> +	} else
>  		*data_error = 0;
>  
>  	/* Clear selected interrupts. */
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h

Changes to host.h are core changes and belong in patch 3, which should be the first patch.

>>>>>Sure.

> index 7afb57c..883b50b 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -93,6 +93,23 @@ struct mmc_clk_phase_map {
>  
>  struct mmc_host;
>  
> +enum mmc_err_stat {
> +	MMC_ERR_CMD_TIMEOUT,
> +	MMC_ERR_CMD_CRC,
> +	MMC_ERR_DAT_TIMEOUT,
> +	MMC_ERR_DAT_CRC,
> +	MMC_ERR_AUTO_CMD,
> +	MMC_ERR_ADMA,
> +	MMC_ERR_TUNING,
> +	MMC_ERR_CMDQ_RED,
> +	MMC_ERR_CMDQ_GCE,
> +	MMC_ERR_CMDQ_ICCE,
> +	MMC_ERR_REQ_TIMEOUT,
> +	MMC_ERR_CMDQ_REQ_TIMEOUT,
> +	MMC_ERR_ICE_CFG,
> +	MMC_ERR_MAX,
> +};
> +
>  struct mmc_host_ops {
>  	/*
>  	 * It is optional for the host to implement pre_req and post_req in 
> @@ -500,6 +517,9 @@ struct mmc_host {
>  
>  	/* Host Software Queue support */
>  	bool			hsq_enabled;
> +	u32                     err_stats[MMC_ERR_MAX];
> +	bool 			err_stats_enabled;
> +	bool			err_state;

Please drop err_state for now

>>>>>>>first we can check this variable right,  if it is set then we can go and check err_stats[] to know more on type of error (data /cmd timeout or CRC errors etc.).
Please let me know your opinion on this.

>  
>  	unsigned long		private[] ____cacheline_aligned;
>  };
> @@ -635,6 +655,17 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data)
>  	return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : 
> DMA_FROM_DEVICE;  }
>  
> +static inline void mmc_debugfs_err_stats_enable(struct mmc_host *mmc)

Please use 'host' as the mmc_host parameter in this file.

> +{
> +	mmc->err_state = true;

Let's make this:

	host->err_stats_enabled = true;

>>>>>>Sure.

> +}
> +
> +static inline void mmc_debugfs_err_stats_inc(struct mmc_host *mmc,
> +		enum mmc_err_stat stat) {
> +

Please remove blank line here

>>>>>>sure.

> +	mmc->err_stats[stat] += 1;
> +}
> +
>  int mmc_send_tuning(struct mmc_host *host, u32 opcode, int 
> *cmd_error);  int mmc_send_abort_tuning(struct mmc_host *host, u32 
> opcode);  int mmc_get_ext_csd(struct mmc_card *card, u8 
> **new_ext_csd);
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux