Re: [PATCH v3 3/5] dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 24, 2022 at 01:18:51PM +0100, michael.srba@xxxxxxxxx wrote:
> From: Michael Srba <Michael.Srba@xxxxxxxxx>
> 
>  This patch adds bindings for the AHB bus which exposes the SCC block in
>  the global address space. This bus (and the SSC block itself) is present
>  on certain qcom SoCs.
> 
>  In typical configuration, this bus (as some of the clocks and registers
>  that we need to manipulate) is not accessible to the OS, and the
>  resources on this bus are indirectly accessed by communicating with a
>  hexagon CPU core residing in the SSC block. In this configuration, the
>  hypervisor is the one performing the bus initialization for the purposes
>  of bringing the haxagon CPU core out of reset.
> 
>  However, it is possible to change the configuration, in which case this
>  binding serves to allow the OS to initialize the bus.
> 
> Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx>
> ---
>  CHANGES:
>  - v2: fix issues caught by by dt-schema
>  - v3: none
> ---
>  Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml | 159 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

You should adjust your git setup for this long line.

>  1 file changed, 159 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
> 
> diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
> new file mode 100644
> index 000000000000..f3f4a991337b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
> +
> +maintainers:
> +  - Michael Srba <Michael.Srba@xxxxxxxxx>
> +
> +description: |
> +  This binding describes the dependencies (clocks, resets, power domains) which
> +  need to be turned on in a sequence before communication over the AHB bus
> +  becomes possible.
> +
> +  Additionally, the reg property is used to pass to the driver the location of
> +  two sadly undocumented registers which need to be poked as part of the sequence.
> +
> +  Currently, this binding is known to apply to msm8998. If the binding applies
> +  in it's current form, the compatible should contain "qcom,ssc-block-bus-v1".
> +  If the binding needs tweaking in order to apply to another SoC, this binding
> +  shall be extended.

Rather than explaining this, follow normal practice for 
> +
> +
> +properties:
> +  compatible:
> +    contains:

Drop contains.

> +      items:
> +      - enum: [ qcom,ssc-block-bus-v1 ]

qcom,msm8998-ssc-block-bus

And IMO, that should be the only compatible for now. If some other 
identical implementation appears, then it can use 
'qcom,msm8998-ssc-block-bus' too. That seems doubtful given there's a 
bunch of both older and new QCom SoCs already out there and this doesn't 
really seem like something reused unchanged.

> +      - const: qcom,ssc-block-bus
> +    description:
> +      Shall contain "qcom,ssc-block-bus"

Don't repeat what the schema says in free form text.

> +
> +  reg:
> +    description: |
> +      Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1
> +      registers
> +    minItems: 2
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: mpm_sscaon_config0
> +      - const: mpm_sscaon_config1
> +
> +  '#address-cells':
> +    enum: [ 1, 2 ]
> +
> +  '#size-cells':
> +    enum: [ 1, 2 ]
> +
> +  ranges: true
> +
> +  clocks:
> +    description: |
> +      Clock phandles for the xo, aggre2, gcc_im_sleep, aggre2_north,
> +      ssc_xo and ssc_ahbs clocks

Again, don't repeat.

> +    minItems: 6
> +    maxItems: 6
> +
> +  clock-names:
> +    items:
> +      - const: xo
> +      - const: aggre2
> +      - const: gcc_im_sleep
> +      - const: aggre2_north
> +      - const: ssc_xo
> +      - const: ssc_ahbs
> +
> +  power-domains:
> +    description: Power domain phandles for the ssc_cx and ssc_mx power domains
> +    minItems: 2
> +    maxItems: 2
> +
> +  power-domain-names:
> +    items:
> +      - const: ssc_cx
> +      - const: ssc_mx
> +
> +  resets:
> +    description: |
> +      Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the
> +      branch control register associated with the ssc_xo and ssc_ahbs clocks)
> +    minItems: 2
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: ssc_reset
> +      - const: ssc_bcr
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      offset within syscon for the ssc AXI halt register.

This can be a bit stricter:

items:
  - items:
      - description: Phandle reference to a syscon representing TCSR
      - description: offset for the ssc AXI halt register


> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - '#address-cells'
> +  - '#size-cells'
> +  - ranges
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - power-domain-names
> +  - resets
> +  - reset-names
> +  - qcom,halt-regs
> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> +    #include <dt-bindings/clock/qcom,rpmcc.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    soc {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        ssc_ahb_slave: bus@10ac008 { // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges;
> +
> +            compatible = "qcom,ssc-block-bus";
> +            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
> +            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
> +
> +            clocks = <&xo>,
> +                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
> +                     <&gcc GCC_IM_SLEEP>,
> +                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
> +                     <&gcc SSC_XO>,
> +                     <&gcc SSC_CNOC_AHBS_CLK>;
> +            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
> +
> +            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
> +            reset-names = "ssc_reset", "ssc_bcr";
> +
> +            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
> +            power-domain-names = "ssc_cx", "ssc_mx";
> +
> +            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
> +
> +            ssc_tlmm: pinctrl@5e10000 {
> +                compatible = "qcom,msm8998-ssc-tlmm-pinctrl";
> +                reg = <0x5E10000 0x10000>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-ranges = <&ssc_tlmm 0 0 20>;
> +            };
> +        };
> +    };
> -- 
> 2.34.1
> 
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux