Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 20, 2022 at 08:04:03PM -0600, Rob Herring wrote:
> On Fri, Jan 21, 2022 at 12:20:16AM +0100, Ansuel Smith wrote:
> > Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> > clocks. The gcc node is also used by the tsens driver, already documented,
> > to get the calib nvmem cells and the base reg from gcc.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > ---
> >  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
> >  1 file changed, 70 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > new file mode 100644
> > index 000000000000..abc76a46b2ca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
> > +
> > +allOf:
> > +  - $ref: qcom,gcc.yaml#
> > +
> > +maintainers:
> > +  - Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > +
> > +description: |
> > +  Qualcomm global clock control module which supports the clocks, resets and
> > +  power domains on IPQ8064.
> > +
> > +  See also:
> > +  - dt-bindings/clock/qcom,gcc-ipq806x.h
> > +  - dt-bindings/reset/qcom,gcc-ipq806x.h
> > +
> > +properties:
> 
> This schema will never be applied because there is not a compatible 
> property to use for matching. The base/common schema is the one that 
> shouldn't have a compatible and then the specific schemas like this 
> one do.
>

Just to make things clear. To fix things up, what changes should I do?
- I should remove the compatible from the base schema qcom,gcc.yaml
- Add the compatible to this schema
- Create another schema that includes all the others compatible?

Can I instead:
- Create a qcom,gcc-common.yaml schema
- Modify the qcom,gcc.yaml schema to ref the common one and drop the
  other binding.
- Fix this schema with the missing compatible?

Tell me how I should proceed since it looks to me that all the
Documentation for the gcc driver looks a bit mess and full of
duplicated stuff.

> > +  clocks:
> > +    items:
> > +      - description: PXO source
> > +      - description: CXO source
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pxo
> > +      - const: cxo
> > +
> > +  thermal-sensor:
> > +    type: object
> > +
> > +    allOf:
> > +      - $ref: /schemas/thermal/qcom-tsens.yaml#
> > +
> > +required:
> > +  - clocks
> > +  - clock-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    gcc: clock-controller@900000 {
> > +      compatible = "qcom,gcc-ipq8064", "syscon";
> > +      reg = <0x00900000 0x4000>;
> > +      clocks = <&pxo_board>, <&cxo_board>;
> > +      clock-names = "pxo", "cxo";
> > +      #clock-cells = <1>;
> > +      #reset-cells = <1>;
> > +      #power-domain-cells = <1>;
> > +
> > +      tsens: thermal-sensor {
> > +        compatible = "qcom,ipq8064-tsens";
> > +
> > +        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
> > +        nvmem-cell-names = "calib", "calib_backup";
> > +        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "uplow";
> > +
> > +        #qcom,sensors = <11>;
> > +        #thermal-sensor-cells = <1>;
> > +      };
> > +    };
> > -- 
> > 2.33.1
> > 
> > 

-- 
	Ansuel



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux