[PATCH 00/14] Multiple addition and improvement to ipq8064 gcc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is an attempt in making the ipq8064 SoC actually usable. Currently
many feature are missing for this SoC and devs user off-the-tree patches
to make it work (example patch for missing clock, patch for cpufreq
driver, patch to add missing node in the dts)

I notice there was some work in modernizing the gcc driver for other
qcom target but this wasn't done for ipq806x. This does exactly this, we
drop any parent_names stuff and we switch to the parent_data way. We
also drop the pxo and cxo source clk from gcc driver and we refer to the
dts for it.

This also add all the missing feature for the nss cores and the
cryptoengine in them. It does also introduce the required flags to make
the RPM actually work and NOT reject any command. There was an attempt
in declaring these clock as core clock in the dts but this ends up in no
serial as the kernel makes these clock not accessible. We just want to
make the kernel NOT disable them if unused nothing more.

At the end we update the ipq8064 dtsi to add the pxo and cxo tag and
declare them in gcc and also fix a problem with tsens probe.

Ansuel Smith (14):
  dt-bindings: clock: Document qcom,gcc-ipq8064 binding
  drivers: clk: qcom: gcc-ipq806x: fix wrong naming for
    gcc_pxo_pll8_pll0
  drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
  drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
  drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
  drivers: clk: qcom: gcc-ipq806x: use parent_hws where possible
  drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
  drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
  drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
  dt-bindings: clock: add ipq8064 ce5 clk define
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
  dt-bindings: reset: add ipq8064 ce5 resets
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
  ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064

 .../bindings/clock/qcom,gcc-ipq8064.yaml      |  67 ++
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |   8 +-
 drivers/clk/qcom/gcc-ipq806x.c                | 652 +++++++++++++-----
 include/dt-bindings/clock/qcom,gcc-ipq806x.h  |   5 +-
 include/dt-bindings/reset/qcom,gcc-ipq806x.h  |   5 +
 5 files changed, 567 insertions(+), 170 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml

-- 
2.33.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux