Re: [PATCH v13 1/4] drm/msm/dp: do not initialize phy until plugin interrupt received

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/13/2022 6:42 PM, Stephen Boyd wrote:
Quoting Kuogee Hsieh (2022-01-13 15:53:36)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 7cc4d21..b3c5404 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -83,6 +83,7 @@ struct dp_display_private {

         /* state variables */
         bool core_initialized;
+       bool phy_initialized;
         bool hpd_irq_on;
         bool audio_supported;

@@ -372,21 +373,38 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
         return rc;
  }

-static void dp_display_host_init(struct dp_display_private *dp, int reset)
+static void dp_display_host_phy_init(struct dp_display_private *dp)
  {
-       bool flip = false;
+       DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
+                       dp->core_initialized, dp->phy_initialized);

+       if (!dp->phy_initialized) {
+               dp_ctrl_phy_init(dp->ctrl);
+               dp->phy_initialized = true;
+       }
+}
+
+static void dp_display_host_phy_exit(struct dp_display_private *dp)
+{
+       DRM_DEBUG_DP("core_init=%d phy_init=%d\n",
+                       dp->core_initialized, dp->phy_initialized);
+
+       if (dp->phy_initialized) {
+               dp_ctrl_phy_exit(dp->ctrl);
+               dp->phy_initialized = false;
+       }
+}
+
+static void dp_display_host_init(struct dp_display_private *dp)
+{
         DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
         if (dp->core_initialized) {
When is this true? From what I see dp_display_host_init() is only called
from two places: resume where core_initialized has been set to false
during suspend or from dp_display_config_hpd() kicked by the kthread
where core_initialized is also false.

Also, I see that dp_display_host_deinit() is only called from suspend
now, so 'core_initialized' is almost always true, except for on the
resume path and before the kthread is started and in the case that the
driver probes but can't start the kthread for some reason (is that
real?).

Yes, that true.

The purpose  of dp_display_host_init() is to configure both dp controller and hpd controller to be ready to receive

HPD plugged-in interrupts and at plugged-in handler enable dp phy. Therefore core_initialized is set to true at both booting up and resume and false at suspend.

                 DRM_DEBUG_DP("DP core already initialized\n");
                 return;
         }

-       if (dp->usbpd->orientation == ORIENTATION_CC2)
-               flip = true;
-
-       dp_power_init(dp->power, flip);
-       dp_ctrl_host_init(dp->ctrl, flip, reset);
+       dp_power_init(dp->power, false);
+       dp_ctrl_reset_irq_ctrl(dp->ctrl, true);
         dp_aux_init(dp->aux);
         dp->core_initialized = true;
  }
@@ -892,12 +901,19 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)

         dp_display->audio_enabled = false;

-       /* triggered by irq_hpd with sink_count = 0 */
         if (dp->link->sink_count == 0) {
+               /*
+                * irq_hpd with sink_count = 0
+                * hdmi unplugged out of dongle
+                */
                 dp_ctrl_off_link_stream(dp->ctrl);
         } else {
+               /*
+                * unplugged interrupt
+                * dongle unplugged out of DUT
+                */
                 dp_ctrl_off(dp->ctrl);
-               dp->core_initialized = false;
+               dp_display_host_phy_exit(dp);
         }

         dp_display->power_on = false;
@@ -1027,7 +1043,7 @@ void msm_dp_snapshot(struct msm_disp_state *disp_state, struct msm_dp *dp)
  static void dp_display_config_hpd(struct dp_display_private *dp)
  {

-       dp_display_host_init(dp, true);
+       dp_display_host_init(dp);
         dp_catalog_ctrl_hpd_config(dp->catalog);

         /* Enable interrupt first time
@@ -1306,20 +1322,23 @@ static int dp_pm_resume(struct device *dev)
         dp->hpd_state = ST_DISCONNECTED;

         /* turn on dp ctrl/phy */
-       dp_display_host_init(dp, true);
+       dp_display_host_init(dp);

         dp_catalog_ctrl_hpd_config(dp->catalog);

-       /*
-        * set sink to normal operation mode -- D0
-        * before dpcd read
-        */
-       dp_link_psm_config(dp->link, &dp->panel->link_info, false);

         if (dp_catalog_link_is_connected(dp->catalog)) {
+               /*
+                * set sink to normal operation mode -- D0
+                * before dpcd read
+                */
+               dp_display_host_phy_init(dp);
+               dp_link_psm_config(dp->link, &dp->panel->link_info, false);
                 sink_count = drm_dp_read_sink_count(dp->aux);
                 if (sink_count < 0)
                         sink_count = 0;
+
+               dp_display_host_phy_exit(dp);
         }

         dp->link->sink_count = sink_count;
@@ -1363,7 +1382,11 @@ static int dp_pm_suspend(struct device *dev)
                 if (dp_power_clk_status(dp->power, DP_CTRL_PM))
                         dp_ctrl_off_link_stream(dp->ctrl);

+               dp_display_host_phy_exit(dp);
+
Why is there a newline here?

                 dp_display_host_deinit(dp);
+       } else {
+               dp_display_host_phy_exit(dp);
         }

         dp->hpd_state = ST_SUSPENDED;
There's a dp->core_initialized = false right here but it's not in the
diff window. It's redundant now because the hunk above is basically

	if (dp->core_initialized == true) {
		...
		dp_display_host_phy_exit(dp);
		dp_display_host_deinit(dp);
	} else {
		dp_display_host_phy_exit(dp);
	}

	dp->hpd_state = ST_SUSPENDED;

and dp_display_host_deinit() sets core_initialized to false, thus
core_initialized will be false here already. Can you remove the
duplicate assignment?
yes,
@@ -1535,7 +1558,7 @@ int msm_dp_display_enable(struct msm_dp *dp, struct drm_encoder *encoder)
         state =  dp_display->hpd_state;

         if (state == ST_DISPLAY_OFF)
-               dp_display_host_init(dp_display, true);
+               dp_display_host_phy_init(dp_display);

         dp_display_enable(dp_display, 0);




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux