[PATCH v10 5/5] drm/msm/dp: stop link training after link training 2 failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Each DP link training contains link training 1 followed by link
training 2.  There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test  case 4.3.1.13 (Source Device Link Training EQ Fallback Test).

Changes in v10:
--  group into one series

Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index f98df93..245e1b9 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1755,6 +1755,9 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
 				/* end with failure */
 				break; /* lane == 1 already */
 			}
+
+			/* stop link training before start re training  */
+			dp_ctrl_clear_training_pattern(ctrl);
 		}
 	}
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux