IRQ types blindly copied from very similar APQ8064.
Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...
Tested-by: LogicalErzor <logicalerzor@xxxxxxxxx> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 0d92ced733fa..ea6156b35554 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -145,7 +145,9 @@ rpm@108000 {
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
@@ -191,7 +193,7 @@ gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -317,7 +319,7 @@ spi@16080000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16080000 0x1000>;
- interrupts = <0 147 0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
cs-gpios = <&msmgpio 8 0>;
--
2.34.1
