Convert the PDC interrupt controller bindings to YAML. Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changes since v1: * Adjust description of second reg-name as suggested by Maulik Shah @Rob Herring: Hope it's ok to keep your R-b given the above changes This patch depends on the following patch, which fixed sm8250 & sm8350 compatibles and adds sm6350. https://lore.kernel.org/linux-arm-msm/20211213082614.22651-4-luca.weiss@xxxxxxxxxxxxx/ .../interrupt-controller/qcom,pdc.txt | 77 ----------------- .../interrupt-controller/qcom,pdc.yaml | 86 +++++++++++++++++++ 2 files changed, 86 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt deleted file mode 100644 index 3b7b1134dea9..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ /dev/null @@ -1,77 +0,0 @@ -PDC interrupt controller - -Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a -Power Domain Controller (PDC) that is on always-on domain. In addition to -providing power control for the power domains, the hardware also has an -interrupt controller that can be used to help detect edge low interrupts as -well detect interrupts when the GIC is non-operational. - -GIC is parent interrupt controller at the highest level. Platform interrupt -controller PDC is next in hierarchy, followed by others. Drivers requiring -wakeup capabilities of their device interrupts routed through the PDC, must -specify PDC as their interrupt controller and request the PDC port associated -with the GIC interrupt. See example below. - -Properties: - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc" - - "qcom,sc7180-pdc": For SC7180 - - "qcom,sc7280-pdc": For SC7280 - - "qcom,sdm845-pdc": For SDM845 - - "qcom,sm6350-pdc": For SM6350 - - "qcom,sm8250-pdc": For SM8250 - - "qcom,sm8350-pdc": For SM8350 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the base physical address for PDC hardware. - -- interrupt-cells: - Usage: required - Value type: <u32> - Definition: Specifies the number of cells needed to encode an interrupt - source. - Must be 2. - The first element of the tuple is the PDC pin for the - interrupt. - The second element is the trigger type. - -- interrupt-controller: - Usage: required - Value type: <bool> - Definition: Identifies the node as an interrupt controller. - -- qcom,pdc-ranges: - Usage: required - Value type: <u32 array> - Definition: Specifies the PDC pin offset and the number of PDC ports. - The tuples indicates the valid mapping of valid PDC ports - and their hwirq mapping. - The first element of the tuple is the starting PDC port. - The second element is the GIC hwirq number for the PDC port. - The third element is the number of interrupts in sequence. - -Example: - - pdc: interrupt-controller@b220000 { - compatible = "qcom,sdm845-pdc"; - reg = <0xb220000 0x30000>; - qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - -DT binding of a device that wants to use the GIC SPI 514 as a wakeup -interrupt, must do - - - wake-device { - interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; - }; - -In this case interrupt 514 would be mapped to port 2 on the PDC as defined by -the qcom,pdc-ranges property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml new file mode 100644 index 000000000000..7e425f0b87cf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PDC interrupt controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> + +description: | + Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a + Power Domain Controller (PDC) that is on always-on domain. In addition to + providing power control for the power domains, the hardware also has an + interrupt controller that can be used to help detect edge low interrupts as + well detect interrupts when the GIC is non-operational. + + GIC is parent interrupt controller at the highest level. Platform interrupt + controller PDC is next in hierarchy, followed by others. Drivers requiring + wakeup capabilities of their device interrupts routed through the PDC, must + specify PDC as their interrupt controller and request the PDC port associated + with the GIC interrupt. See example below. + +properties: + compatible: + items: + - enum: + - qcom,sc7180-pdc + - qcom,sc7280-pdc + - qcom,sdm845-pdc + - qcom,sm6350-pdc + - qcom,sm8250-pdc + - qcom,sm8350-pdc + - const: qcom,pdc + + reg: + minItems: 1 + items: + - description: PDC base register region + - description: Edge or Level config register for SPI interrupts + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + qcom,pdc-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 32 # no hard limit + items: + items: + - description: starting PDC port + - description: GIC hwirq number for the PDC port + - description: number of interrupts in sequence + description: | + Specifies the PDC pin offset and the number of PDC ports. + The tuples indicates the valid mapping of valid PDC ports + and their hwirq mapping. + +required: + - compatible + - reg + - '#interrupt-cells' + - interrupt-controller + - qcom,pdc-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0xb220000 0x30000>; + qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + wake-device { + interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; + }; -- 2.34.1
