From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
Convert Qualcomm SPMI PMIC binding to yaml format.
Additional changes:
- filled many missing compatibles
Co-developed-by: David Heidelberg <david@xxxxxxx>
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
depends on patch "arm64: dts: qcom: pms405: assign device specific compatible"
---
.../bindings/mfd/qcom,spmi-pmic.txt | 93 -----------
.../bindings/mfd/qcom,spmi-pmic.yaml | 152 ++++++++++++++++++
2 files changed, 152 insertions(+), 93 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
deleted file mode 100644
index 3810a80536f7..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,93 +0,0 @@
- Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs. These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible: Should contain one of:
- "qcom,pm660",
- "qcom,pm660l",
- "qcom,pm7325",
- "qcom,pm8004",
- "qcom,pm8005",
- "qcom,pm8019",
- "qcom,pm8028",
- "qcom,pm8110",
- "qcom,pm8150",
- "qcom,pm8150b",
- "qcom,pm8150c",
- "qcom,pm8150l",
- "qcom,pm8226",
- "qcom,pm8350c",
- "qcom,pm8841",
- "qcom,pm8901",
- "qcom,pm8909",
- "qcom,pm8916",
- "qcom,pm8941",
- "qcom,pm8950",
- "qcom,pm8994",
- "qcom,pm8998",
- "qcom,pma8084",
- "qcom,pmd9635",
- "qcom,pmi8950",
- "qcom,pmi8962",
- "qcom,pmi8994",
- "qcom,pmi8998",
- "qcom,pmk8002",
- "qcom,pmk8350",
- "qcom,pmr735a",
- "qcom,smb2351",
- or generalized "qcom,spmi-pmic".
-- reg: Specifies the SPMI USID slave address for this device.
- For more information see:
- Documentation/devicetree/bindings/spmi/spmi.yaml
-
-Required properties for peripheral child nodes:
-- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts: Interrupts are specified as a 4-tuple. For more information
- see:
- Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
- spmi {
- compatible = "qcom,spmi-pmic-arb";
-
- pm8941@0 {
- compatible = "qcom,pm8941", "qcom,spmi-pmic";
- reg = <0x0 SPMI_USID>;
-
- rtc {
- compatible = "qcom,rtc";
- interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "alarm";
- };
- };
-
- pm8941@1 {
- compatible = "qcom,pm8941", "qcom,spmi-pmic";
- reg = <0x1 SPMI_USID>;
-
- regulator {
- compatible = "qcom,regulator";
- regulator-name = "8941_boost";
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 000000000000..11aa2c61eded
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+ Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+ to the chip via the SPMI (System Power Management Interface) bus.
+ Support for multiple independent functions are implemented by splitting the
+ 16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+ each. A function can consume one or more of these fixed-size register regions.
+
+ The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+ PMICs. These PMICs use a "QPNP" scheme through SPMI interface.
+ QPNP is effectively a partitioning scheme for dividing the SPMI extended
+ register space up into logical pieces, and set of fixed register
+ locations/definitions within these regions, with some of these regions
+ specifically used for interrupt handling.
+
+maintainers:
+ - Stephen Boyd <sboyd@xxxxxxxxxx>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,pm660
+ - qcom,pm660l
+ - qcom,pm6150
+ - qcom,pm6150l
+ - qcom,pm6350
+ - qcom,pm7325
+ - qcom,pm8004
+ - qcom,pm8005
+ - qcom,pm8009
+ - qcom,pm8019
+ - qcom,pm8110
+ - qcom,pm8150
+ - qcom,pm8150b
+ - qcom,pm8150l
+ - qcom,pm8226
+ - qcom,pm8350
+ - qcom,pm8350b
+ - qcom,pm8350c
+ - qcom,pm8841
+ - qcom,pm8909
+ - qcom,pm8916
+ - qcom,pm8941
+ - qcom,pm8950
+ - qcom,pm8994
+ - qcom,pm8998
+ - qcom,pma8084
+ - qcom,pmd9635
+ - qcom,pmi8950
+ - qcom,pmi8962
+ - qcom,pmi8994
+ - qcom,pmi8998
+ - qcom,pmk8350
+ - qcom,pmm8155au
+ - qcom,pmr735a
+ - qcom,pmr735b
+ - qcom,pms405
+ - qcom,smb2351
+ - const: qcom,spmi-pmic
+
+ reg: true
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+
+patternProperties:
+ $nodename:
+ pattern: '^pmic@.*$'
+
+ '(labibb|([a-z][a-z0-9]+-)?regulators)':
+ type: object
+
+ required:
+ - compatible
+
+ '@[0-9a-f]+$':
+ type: object
+ description: >
+ Each child node of the PMIC represents a function of it.
+
+ properties:
+ interrupts:
+ description: >
+ Interrupts are specified as a 4-tuple. For more information see
+ Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
+
+ interrupt-names: true
+
+ required:
+ - compatible
+
+ additionalProperties: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/spmi/spmi.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0c440000 0x1100>,
+ <0x0c600000 0x2000000>,
+ <0x0e600000 0x100000>,
+ <0x0e700000 0xa0000>,
+ <0x0c40a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_gpio: gpios@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ gpio-ranges = <&pmi8998_gpio 0 0 14>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
--
2.34.1
