Convert Qualcomm PMIC SPMI binding to yaml format.
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
v2:
- add #address and #size-cells
- add reg and remove spmi include from example
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
.../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
2 files changed, 120 insertions(+), 65 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index ca645e21fe47..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names : must contain:
- "core" - core registers
- "intr" - interrupt controller registers
- "cnfg" - configuration registers
- Registers used only for V2 PMIC Arbiter:
- "chnls" - tx-channel per virtual slave registers.
- "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
- correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
- single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
- listed in the 'interrupts' property, must contain:
- "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
- cell 1: slave ID for the requested interrupt (0-15)
- cell 2: peripheral ID for requested interrupt (0-255)
- cell 3: the requested peripheral interrupt (0-7)
- cell 4: interrupt flags indicating level-sense information, as defined in
- dt-bindings/interrupt-controller/irq.h
-
-Example:
-
- spmi {
- compatible = "qcom,spmi-pmic-arb";
- reg-names = "core", "intr", "cnfg";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
-
- interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
-
- qcom,ee = <0>;
- qcom,channel = <0>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- interrupt-controller;
- #interrupt-cells = <4>;
- };
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..55d379c85fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+ - Stephen Boyd <sboyd@xxxxxxxxxx>
+
+description: |
+ The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control a single SPMI master.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+allOf:
+ - $ref: spmi.yaml
+
+properties:
+ compatible:
+ const: qcom,spmi-pmic-arb
+
+ reg:
+ oneOf:
+ - items: # V1
+ - description: core registers
+ - description: interrupt controller registers
+ - description: configuration registers
+ - items: # V2
+ - description: core registers
+ - description: tx-channel per virtual slave regosters
+ - description: rx-channel (called observer) per virtual slave registers
+ - description: interrupt controller registers
+ - description: configuration registers
+
+ reg-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: intr
+ - const: cnfg
+ - items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+ - const: intr
+ - const: cnfg
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#address-cells': true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+ '#size-cells': true
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+required:
+ - compatible
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - '#interrupt-cells'
+ - qcom,ee
+ - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
--
2.34.1
