On Tue, Nov 23, 2021 at 09:15:41AM +0100, Thomas Perrot wrote:
> Add support for EM919X modems, this modem series is based on SDX55
> qcom chip.
>
> It is mandatory to use the same ring for control+data and diag events.
>
> Tested-by: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
> Signed-off-by: Thomas Perrot <thomas.perrot@xxxxxxxxxxx>
Applied to mhi-next!
Thanks,
Mani
> ---
> drivers/bus/mhi/pci_generic.c | 43 +++++++++++++++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> index 59a4896a8030..076a951fd587 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -403,7 +403,50 @@ static const struct mhi_pci_dev_info mhi_mv31_info = {
> .dma_data_width = 32,
> };
>
> +static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {
> + MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
> + MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0),
> + MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0),
> + MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0),
> + MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0),
> + MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
> + MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
> + MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1),
> + MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2),
> +};
> +
> +static struct mhi_event_config modem_sierra_em919x_mhi_events[] = {
> + /* first ring is control+data and DIAG ring */
> + MHI_EVENT_CONFIG_CTRL(0, 2048),
> + /* Hardware channels request dedicated hardware event rings */
> + MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100),
> + MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
> +};
> +
> +static const struct mhi_controller_config modem_sierra_em919x_config = {
> + .max_channels = 128,
> + .timeout_ms = 24000,
> + .num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels),
> + .ch_cfg = mhi_sierra_em919x_channels,
> + .num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events),
> + .event_cfg = modem_sierra_em919x_mhi_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
> + .name = "sierra-em919x",
> + .config = &modem_sierra_em919x_config,
> + .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> + .dma_data_width = 32,
> + .sideband_wake = false,
> +};
> +
> static const struct pci_device_id mhi_pci_id_table[] = {
> + /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
> + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
> + .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
> { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
> .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
> { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
> --
> 2.31.1
>
