Re: [PATCH v2 1/2] clk: qcom: Add display clock controller driver for QCM2290

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 09 Dec 08:09 CST 2021, Loic Poulain wrote:
[..]
> diff --git a/drivers/clk/qcom/dispcc-qcm2290.c b/drivers/clk/qcom/dispcc-qcm2290.c
[..]
> +static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = {
> +	.cmd_rcgr = 0x2074,
> +	.mnd_width = 0,
> +	.hid_width = 5,
> +	.parent_map = disp_cc_parent_map_3,
> +	.freq_tbl = ftbl_disp_cc_mdss_mdp_clk_src,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "disp_cc_mdss_mdp_clk_src",
> +		.parent_data = disp_cc_parent_data_3,
> +		.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
> +		.flags = CLK_SET_RATE_PARENT,
> +		.ops = &clk_rcg2_ops,

Clocks that are marked enable_safe_config = true downstream needs to be
parked onto a safe parent as they are being disabled.

This is taken care of upstream by using clk_rcg2_shared_ops.

> +	},
> +};
> +
[..]
> diff --git a/include/dt-bindings/clock/qcom,dispcc-qcm2290.h b/include/dt-bindings/clock/qcom,dispcc-qcm2290.h
> new file mode 100644
> index 00000000..ef50c17
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,dispcc-qcm2290.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SCUBA_H
> +#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SCUBA_H

Please replace SCUBA here and can you please move the include file to
the DT binding patch instead?

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux