Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.
While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).
Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 27ed152b1ba9..4cc1808963dd 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1434,8 +1434,8 @@ pcie0: pci@1c00000 {
phys = <&pcie0_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
@@ -1538,8 +1538,8 @@ pcie1: pci@1c08000 {
phys = <&pcie1_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
@@ -1644,8 +1644,8 @@ pcie2: pci@1c10000 {
phys = <&pcie2_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
--
2.33.0
