[PATCH 0/2] regulator: scmi: add support for registering SCMI regulators by name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support to register SCMI regulator subnodes based on an SCMI
Voltage Domain name specified via the 'regulator-name' device tree
property.  In doing so, make the 'reg' property optional with the
constraint that at least one of 'reg' or 'regulator-name' must be
specified.  If both are specified, then both must match the
Voltage Domain data exposed by the SCMI platform.

Name based SCMI regulator registration helps ensure that an SCMI
agent doesn't need to be aware of the numbering scheme used for
Voltage Domains by the SCMI platform.  It also ensures that the
correct Voltage Domain is selected for a given physical regulator.
This cannot be guaranteed with numeric Voltage Domain IDs alone.

David Collins (2):
  dt-bindings: firmware: arm,scmi: define support for name based
    regulators
  regulator: scmi: add support for registering SCMI regulators by name

 .../bindings/firmware/arm,scmi.yaml           | 11 +++-
 drivers/regulator/scmi-regulator.c            | 57 ++++++++++++++++++-
 2 files changed, 62 insertions(+), 6 deletions(-)

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux