[PATCH 0/4] Prepare general purpose clocks on msm8916

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some devices make use of general purpose clocks as PWM outputs by
controlling their duty cycle.

Notably, many devices (e.g. Samsung A3/A5, LG G Watch R and probably
many others) use clock based PWM to control the haptic feedback,
some other can control backlight or flash/torch LED brightness.

As a follow-up to a proposed clock based PWM output driver [1],
this series contains various fixes to make it useful on msm8916
based devices.

[1] - https://lore.kernel.org/lkml/20211209162020.105255-1-nikita@xxxxxxx/T/

Nikita Travkin (4):
  clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is
    not enabled.
  clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register
  pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed
  clk: qcom: gcc-msm8916: Add rates to the GP clocks

 drivers/clk/qcom/clk-rcg2.c            | 11 +++++++-
 drivers/clk/qcom/gcc-msm8916.c         | 35 ++++++++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-msm8916.c |  4 +--
 3 files changed, 47 insertions(+), 3 deletions(-)

-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux