Enable the UFS and phy node and add the regulators used by them. Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 26d2b5aa8dff..6cf584ebf1ed 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -356,3 +356,23 @@ &tlmm { &uart7 { status = "okay"; }; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-max-microamp = <173000>; + vdda-pll-max-microamp = <24900>; +}; -- 2.31.1