[PATCH 9/9] ARM: DT: qcom: Add Qualcomm crypto driver binding document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is Qualcomm crypto driver device tree binding documentation
to used as a reference example.

Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
---
 .../devicetree/bindings/crypto/qcom-qce.txt        | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt

diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
new file mode 100644
index 000000000000..7ec67c90d2d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
@@ -0,0 +1,25 @@
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible  : should be "qcom,crypto-v5.1"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+		"bus" clocks data transfer interface
+		"core" clocks reset of the crypto block
+- dmas        : DMA specifiers for tx and rx dma channels. For more see
+		Documentation/devicetree/bindings/dma/dma.txt
+- dma-names   : DMA request names should be "rx" and "tx"
+
+Example:
+	crypto@fd45a000 {
+		compatible = "qcom,crypto-v5.1";
+		reg = <0xfd45a000 0x6000>;
+		clocks = <&gcc GCC_CE2_AHB_CLK>,
+			 <&gcc GCC_CE2_AXI_CLK>,
+			 <&gcc GCC_CE2_CLK>;
+		clock-names = "iface", "bus", "core";
+		dmas = <&cryptobam 2>, <&cryptobam 3>;
+		dma-names = "rx", "tx";
+	};
-- 
1.8.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux