Re: [PATCH v5 1/2] i2c: qup: Add device tree bindings information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On March 13, 2014 9:07:42 PM CDT, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxxxxxx> wrote:
>From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
>
>The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
>provide input and output FIFO's for it. I2C controller can operate
>as master with supported bus speeds of 100Kbps and 400Kbps.
>
>Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
>[bjorn: reformulated part of binding description
>        added version to compatible
>        cleaned up example]
>Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>---
>.../devicetree/bindings/i2c/qcom,i2c-qup.txt       |   46
>++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>create mode 100644
>Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
>
>diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
>b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
>new file mode 100644
>index 0000000..32ef64e
>--- /dev/null
>+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
>@@ -0,0 +1,46 @@
>+Qualcomm Universal Peripheral (QUP) I2C controller
>+
>+Required properties:
>+ - compatible: Should be:
>+   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
>+   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
>+   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
>+ - reg: Should contain QUP register address and length.
>+ - interrupts: Should contain I2C interrupt.
>+
>+ - clocks: A list of phandles + clock-specifiers, one for each entry
>in
>+   clock-names.
>+ - clock-names: Should contain:
>+   * "core" for the core clock
>+   * "iface" for the AHB clock
>+
>+ - #address-cells: Should be <1> Address cells for i2c device address
>+ - #size-cells: Should be <0> as i2c addresses have no size component
>+
>+Optional properties:
>+ - clock-frequency: Should specify the desired i2c bus clock frequency
>in Hz,
>+                    defaults to 100kHz if omitted.
>+
>+Child nodes should conform to i2c bus binding.
>+
>+Example:
>+
>+ i2c@f9924000 {
>+ compatible = "qcom,i2c-qup-v2.2.1";
>+ reg = <0xf9924000 0x1000>;
>+ interrupts = <0 96 0>;
>+
>+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc
>GCC_BLSP1_AHB_CLK>;
>+ clock-names = "core", "iface";
>+
>+ clock-frequency = <355000>;
>+
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+
>+ dummy@60 {
>+ compatible = "dummy";
>+ reg = <0x60>;
>+ };
>+ };
>+
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux