On 03/12/2014 03:38 PM, Russell King - ARM Linux wrote:
> On Wed, Mar 12, 2014 at 03:09:53PM +0200, Grygorii Strashko wrote:
>> Hi Russell,
>>
>> On 03/12/2014 10:54 AM, Russell King - ARM Linux wrote:
>>> On Tue, Feb 18, 2014 at 02:15:33PM -0800, Laura Abbott wrote:
>>>> memblock is now fully integrated into the kernel and is the prefered
>>>> method for tracking memory. Rather than reinvent the wheel with
>>>> meminfo, migrate to using memblock directly instead of meminfo as
>>>> an intermediate.
>>>>
>>>> Acked-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
>>>> Acked-by: Catalin Marinas <catalin.marinas@xxxxxxx>
>>>> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
>>>> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>>>> Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>>>> Tested-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>
>>>> Signed-off-by: Laura Abbott <lauraa@xxxxxxxxxxxxxx>
>>>
>>> Laura,
>>>
>>> This patch causes a bunch of platforms to no longer boot - imx6solo with
>>> 1GB of RAM boots, imx6q with 2GB of RAM doesn't. Versatile Express doesn't.
>>>
>>> The early printk messages don't reveal anything too interesting:
>>>
>>> Booting Linux on physical CPU 0x0
>>> Linux version 3.14.0-rc6+ (rmk@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.4 (GCC) ) #630 SMP Wed Mar 12 01:13:36 GMT 2014
>>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>>> Machine model: SolidRun Cubox-i Dual/Quad
>>> cma: CMA: reserved 64 MiB at 8c000000
>>> Memory policy: Data cache writealloc
>>> <hang>
>>>
>>> vs.
>>>
>>> Booting Linux on physical CPU 0x0
>>> Linux version 3.14.0-rc6+ (rmk@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.4 (GCC) ) #631 SMP Wed Mar 12 01:15:37 GMT 2014
>>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>>> Machine model: SolidRun Cubox-i Dual/Quad
>>> cma: CMA: reserved 64 MiB at 3b800000
>>> Memory policy: Data cache writealloc
>>> On node 0 totalpages: 524288
>>> free_area_init_node: node 0, pgdat c09d0240, node_mem_map ea7d8000
>>> Normal zone: 1520 pages used for memmap
>>> Normal zone: 0 pages reserved
>>> Normal zone: 194560 pages, LIFO batch:31
>>> HighMem zone: 2576 pages used for memmap
>>> HighMem zone: 329728 pages, LIFO batch:31
>>> ...
>>>
>>> The only obvious difference is the address of that CMA reservation,
>>> CMA shouldn't make a difference here - but I suspect that other
>>> allocations which need to be in lowmem probably aren't.
>>>
>>
>> Could it be possible to enable memblock debug by adding "memblock=debug"
>> in cmdline?
>
> Here's with Laura's patch:
>
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0x0
> Linux version 3.14.0-rc6+ (rmk@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.4 (GCC) ) #633 SMP Wed Mar 12 12:56:15 GMT 2014
> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine model: SolidRun Cubox-i Dual/Quad
> memblock_reserve: [0x00000010008240-0x0000001112c1f7] flags 0x0 arm_memblock_init+0x28/0x1a8
> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_memblock_init+0x108/0x1a8
> memblock_reserve: [0x00000010004000-0x00000010007fff] flags 0x0 arm_mm_memblock_reserve+0x1c/0x24
> memblock_reserve: [0x00000018000000-0x0000001800b07f] flags 0x0 arm_dt_memblock_reserve+0x2c/0x70
> memblock_reserve: [0x00000018000000-0x0000001800afff] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
> memblock_reserve: [0x0000008c000000-0x0000008fffffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> cma: CMA: reserved 64 MiB at 8c000000
> MEMBLOCK configuration:
> memory size = 0x80000000 reserved size = 0x52fda50
> memory.cnt = 0x1
> memory[0x0] [0x00000010000000-0x0000008fffffff], 0x80000000 bytes flags: 0x06
> reserved.cnt = 0x5
> reserved[0x0] [0x00000010004000-0x00000010007fff], 0x4000 bytes flags: 0x0
> reserved[0x1] [0x00000010008240-0x0000001112c1f7], 0x1123fb8 bytes flags: 0x0
> reserved[0x2] [0x00000018000000-0x0000001800b07f], 0xb080 bytes flags: 0x0
> reserved[0x3] [0x00000020000040-0x000000201caa57], 0x1caa18 bytes flags: 0x0
> reserved[0x4] [0x0000008c000000-0x0000008fffffff], 0x4000000 bytes flags: 0x0
> Memory policy: Data cache writealloc
> memblock_reserve: [0x0000008bffffd8-0x0000008bffffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>
> Here's without:
>
> Booting Linux on physical CPU 0x0
> Linux version 3.14.0-rc6+ (rmk@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.4 (GCC) ) #635 SMP Wed Mar 12 13:22:15 GMT 2014
> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine model: SolidRun Cubox-i Dual/Quad
> memblock_reserve: [0x00000010008240-0x0000001112c277] flags 0x0 arm_memblock_init+0x54/0x1d4
> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_memblock_init+0x134/0x1d4
> memblock_reserve: [0x00000010004000-0x00000010007fff] flags 0x0 arm_mm_memblock_reserve+0x1c/0x24
> memblock_reserve: [0x00000018000000-0x0000001800b07f] flags 0x0 arm_dt_memblock_reserve+0x2c/0x70
> memblock_reserve: [0x00000018000000-0x0000001800afff] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
> memblock_reserve: [0x0000003b800000-0x0000003f7fffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> cma: CMA: reserved 64 MiB at 3b800000
> MEMBLOCK configuration:
> memory size = 0x80000000 reserved size = 0x52fdad0
> memory.cnt = 0x1
> memory[0x0] [0x00000010000000-0x0000008fffffff], 0x80000000 bytes flags: 0x0
> reserved.cnt = 0x5
> reserved[0x0] [0x00000010004000-0x00000010007fff], 0x4000 bytes flags: 0x0
> reserved[0x1] [0x00000010008240-0x0000001112c277], 0x1124038 bytes flags: 0x0
> reserved[0x2] [0x00000018000000-0x0000001800b07f], 0xb080 bytes flags: 0x0
> reserved[0x3] [0x00000020000040-0x000000201caa57], 0x1caa18 bytes flags: 0x0
> reserved[0x4] [0x0000003b800000-0x0000003f7fffff], 0x4000000 bytes flags: 0x0
> Memory policy: Data cache writealloc
> memblock_reserve: [0x0000003b7fffd8-0x0000003b7fffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> memblock_reserve: [0x0000003b7fe000-0x0000003b7fefff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> memblock_reserve: [0x0000003b7fd000-0x0000003b7fdfff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> memblock_reserve: [0x0000003b7fc000-0x0000003b7fcfff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
> ...
>
> So it looks like allocations which must come from lowmem aren't being
> limited to lowmem.
>
> Try booting a machine with 2G of RAM with page offset set to 3GB and
> highmem enabled - it will fail as per the above.
>
> In fact, if we look at sanity_check_meminfo() post that patch, it's
> clearly wrong:
>
> for_each_memblock(memory, reg) {
> phys_addr_t block_start = reg->base;
> phys_addr_t block_end = reg->base + reg->size;
> phys_addr_t size_limit = reg->size;
>
> if (reg->base >= vmalloc_limit)
> highmem = 1;
> else
> size_limit = vmalloc_limit - reg->base;
> ...
> if (!highmem) {
> if (block_end > arm_lowmem_limit)
> arm_lowmem_limit = block_end;
In v3, above was
arm_lowmem_limit = reg->base + size_limit;
so, it has worked somehow, even arm_lowmem_limit can point on non
existed address. It was changed because of my comment - sorry.
I think, it should be smth like:
if (!highmem) {
if (block_end > arm_lowmem_limit)
if (reg->size > size_limit)
arm_lowmem_limit = vmalloc_limit;
else
arm_lowmem_limit = block_end;
I've created and attached the patch which allows me to boot on keystone.
> ...
> }
regards,
-grygorii
>From 3a210330f15c4cfc6728d83b28750c696d9eaefb Mon Sep 17 00:00:00 2001
From: Grygorii Strashko <x0174654@uglx0174654.(none)>
Date: Wed, 12 Mar 2014 18:04:02 +0200
Subject: [PATCH] arm: get rid of meminfo: fix lowmem_limit calculation
Signed-off-by: Grygorii Strashko <x0174654@uglx0174654.(none)>
---
arch/arm/mm/mmu.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index c3ae96c..f8b5175 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1096,8 +1096,12 @@ void __init sanity_check_meminfo(void)
}
if (!highmem) {
- if (block_end > arm_lowmem_limit)
- arm_lowmem_limit = block_end;
+ if (block_end > arm_lowmem_limit) {
+ if (reg->size > size_limit)
+ arm_lowmem_limit = vmalloc_limit;
+ else
+ arm_lowmem_limit = block_end;
+ }
/*
@@ -1117,7 +1121,7 @@ void __init sanity_check_meminfo(void)
if (!IS_ALIGNED(block_start, SECTION_SIZE))
memblock_limit = block_start;
else if (!IS_ALIGNED(block_end, SECTION_SIZE))
- memblock_limit = block_end;
+ memblock_limit = arm_lowmem_limit;
}
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
