Re: [PATH v2 2/2] spi: Add Qualcomm QUP SPI controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 13, 2014 at 06:21:38PM +0200, Ivan T. Ivanov wrote:

> Qualcomm Universal Peripheral (QUP) core is an AHB slave that
> provides a common data path (an output FIFO and an input FIFO)
> for serial peripheral interface (SPI) mini-core. SPI in master
> mode supports up to 50MHz, up to four chip selects, programmable
> data path from 4 bits to 32 bits and numerous protocol variants.

I've applied this since it mostly looks good but there's a few small
outstanding issues, please submit incremental patches fixing them.

> +#define SPI_CONFIG			0x0300
> +#define SPI_IO_CONTROL			0x0304
> +#define SPI_ERROR_FLAGS			0x0308
> +#define SPI_ERROR_FLAGS_EN		0x030c

You've got lots of defines that are just plain SPI_ which is looking for
namespace collisions - please prefix them.

> +	if (spi->chip_select >= spi->master->num_chipselect) {
> +		dev_err(controller->dev, "invalid chip_select %d\n",
> +			spi->chip_select);
> +		return -EINVAL;
> +	}

The core does this prior to allowing the slave to be registered at all.

> +
> +	if (spi->max_speed_hz > controller->max_speed_hz) {
> +		dev_err(controller->dev, "invalid max_speed_hz %d\n",
> +			spi->max_speed_hz);
> +		return -EINVAL;
> +	}

The core will check this for you if you set master->max_speed_hz.

> +#ifdef CONFIG_PM_RUNTIME
> +static int spi_qup_pm_suspend_runtime(struct device *device)
> +{
> +	struct spi_master *master = dev_get_drvdata(device);
> +	struct spi_qup *controller = spi_master_get_devdata(master);
> +	u32 config;
> +
> +	/* Enable clocks auto gaiting */
> +	config = readl(controller->base + QUP_CONFIG);
> +	config |= QUP_CLOCK_AUTO_GATE;
> +	writel_relaxed(config, controller->base + QUP_CONFIG);
> +	return 0;
> +}

Why not just enable this all the time?  I'd have expected some clock API
calls here similar to those in the main suspend and resume paths.

> +MODULE_VERSION("0.4");

Don't bother doing this, nobody will ever keep updating the version
number - the kernel version should be enough.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux