From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> Hi, Following two patches are adding initial support for SPI controller available in Qualcomm SoC's. Controller initialization is based on spi_qsd driver available in CAF repository. Controller supports SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP modes, up to 3 CS's and from 4 to 32 bits per word. SPI_LOOP mode is limited to input FIFO buffer size. Currently driver support only PIO mode, I am hopping to add also DMA mode support with dmaengine patches developed by Andy. Regards, Ivan Ivan T. Ivanov (2): spi: qup: Add device tree bindings information spi: Add Qualcomm QUP SPI controller support .../devicetree/bindings/spi/qcom,spi-qup.txt | 86 ++ drivers/spi/Kconfig | 14 + drivers/spi/Makefile | 1 + drivers/spi/spi-qup.c | 898 ++++++++++++++++++++ 4 files changed, 999 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt create mode 100644 drivers/spi/spi-qup.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
