Add support for configuring pins as output with value as from the pinconf-generic interface. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-msm.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c index ef2bf31..2cfb1d4 100644 --- a/drivers/pinctrl/pinctrl-msm.c +++ b/drivers/pinctrl/pinctrl-msm.c @@ -228,6 +228,11 @@ static int msm_config_reg(struct msm_pinctrl *pctrl, *bit = g->drv_bit; *mask = 7; break; + case PIN_CONFIG_OUTPUT: + *reg = g->ctl_reg; + *bit = g->oe_bit; + *mask = 1; + break; default: dev_err(pctrl->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; @@ -301,6 +306,14 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev, case PIN_CONFIG_DRIVE_STRENGTH: arg = msm_regval_to_drive[arg]; break; + case PIN_CONFIG_OUTPUT: + /* Pin is not output */ + if (!arg) + return -EINVAL; + + val = readl(pctrl->regs + g->io_reg); + arg = !!(val & BIT(g->in_bit)); + break; default: dev_err(pctrl->dev, "Unsupported config parameter: %x\n", param); @@ -357,6 +370,20 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev, else arg = msm_drive_to_regval[arg]; break; + case PIN_CONFIG_OUTPUT: + /* set output value */ + spin_lock_irqsave(&pctrl->lock, flags); + val = readl(pctrl->regs + g->io_reg); + if (arg) + val |= BIT(g->out_bit); + else + val &= ~BIT(g->out_bit); + writel(val, pctrl->regs + g->io_reg); + spin_unlock_irqrestore(&pctrl->lock, flags); + + /* enable output */ + arg = 1; + break; default: dev_err(pctrl->dev, "Unsupported config parameter: %x\n", param); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
