This platform driver adds the initial support of Secure
Digital Host Controller Interface compliant controller
found in Qualcomm chipsets.
Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
---
drivers/mmc/host/Kconfig | 13 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-msm.c | 531 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 545 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-msm.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1384f67..c32d092 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -334,6 +334,19 @@ config MMC_ATMELMCI
If unsure, say N.
+config MMC_SDHCI_MSM
+ tristate "Qualcomm SDHCI Controller Support"
+ depends on ARCH_MSM
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ support present in MSM SOCs from Qualcomm. The controller
+ supports SD/MMC/SDIO devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3483b6b..bbc8445 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
new file mode 100644
index 0000000..900e813
--- /dev/null
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -0,0 +1,531 @@
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm MSM SDHCI Platform
+ * driver source file
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE 0x78
+#define HC_MODE_EN 0x1
+
+#define CORE_POWER 0x0
+#define CORE_SW_RST BIT(7)
+
+#define CORE_PWRCTL_STATUS 0xdc
+#define CORE_PWRCTL_MASK 0xe0
+#define CORE_PWRCTL_CLEAR 0xe4
+#define CORE_PWRCTL_CTL 0xe8
+
+#define CORE_PWRCTL_BUS_OFF BIT(0)
+#define CORE_PWRCTL_BUS_ON BIT(1)
+#define CORE_PWRCTL_IO_LOW BIT(2)
+#define CORE_PWRCTL_IO_HIGH BIT(3)
+
+#define CORE_PWRCTL_BUS_SUCCESS BIT(0)
+#define CORE_PWRCTL_BUS_FAIL BIT(1)
+#define CORE_PWRCTL_IO_SUCCESS BIT(2)
+#define CORE_PWRCTL_IO_FAIL BIT(3)
+
+#define INT_MASK 0xf
+
+
+/* This structure keeps information per regulator */
+struct sdhci_msm_reg_data {
+ struct regulator *reg;
+ const char *name;
+ /* Voltage level values */
+ u32 low_vol_level;
+ u32 high_vol_level;
+};
+
+struct sdhci_msm_pltfm_data {
+ u32 caps; /* Supported UHS-I Modes */
+ u32 caps2; /* More capabilities */
+ struct sdhci_msm_reg_data vdd; /* VDD/VCC regulator info */
+ struct sdhci_msm_reg_data vdd_io; /* VDD IO regulator info */
+};
+
+struct sdhci_msm_host {
+ struct platform_device *pdev;
+ void __iomem *core_mem; /* MSM SDCC mapped address */
+ int pwr_irq; /* power irq */
+ struct clk *clk; /* main SD/MMC bus clock */
+ struct clk *pclk; /* SDHC peripheral bus clock */
+ struct clk *bus_clk; /* SDHC bus voter clock */
+ struct sdhci_msm_pltfm_data pdata;
+ struct mmc_host *mmc;
+ struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* MSM platform specific tuning */
+int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ /*
+ * Tuning is required for SDR104, HS200 and HS400 cards and if the clock
+ * frequency greater than 100MHz in those modes. The standard tuning
+ * procedure should not be executed, but a custom implementation will be
+ * added here instead.
+ */
+ return 0;
+}
+
+#define MAX_PROP_SIZE 32
+static int sdhci_msm_dt_parse_vreg_info(struct device *dev,
+ struct sdhci_msm_reg_data *vreg, const char *vreg_name)
+{
+ char prop_name[MAX_PROP_SIZE];
+ struct device_node *np = dev->of_node;
+
+ vreg->name = vreg_name;
+
+ snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-voltage-min", vreg_name);
+ of_property_read_u32(np, prop_name, &vreg->low_vol_level);
+ snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-voltage-max", vreg_name);
+ of_property_read_u32(np, prop_name, &vreg->high_vol_level);
+
+ /* sanity check */
+ if (vreg->low_vol_level > vreg->high_vol_level) {
+ dev_err(dev, "%s invalid constraints specified\n", vreg->name);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Parse devicetree data */
+static int sdhci_msm_populate_pdata(struct device *dev,
+ struct sdhci_msm_pltfm_data *pdata)
+{
+ if (sdhci_msm_dt_parse_vreg_info(dev, &pdata->vdd, "vdd")) {
+ dev_err(dev, "failed parsing vdd data\n");
+ return -EINVAL;
+ }
+
+ if (sdhci_msm_dt_parse_vreg_info(dev, &pdata->vdd_io, "vdd-io")) {
+ dev_err(dev, "failed parsing vdd-io data\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sdhci_msm_vreg_enable(struct device *dev,
+ struct sdhci_msm_reg_data *vreg)
+{
+ int ret = 0;
+
+ if (!regulator_is_enabled(vreg->reg)) {
+ /* Set voltage level */
+ ret = regulator_set_voltage(vreg->reg, vreg->high_vol_level,
+ vreg->high_vol_level);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_enable(vreg->reg);
+ if (ret) {
+ dev_err(dev, "regulator_enable(%s) fail (%d)\n",
+ vreg->name, ret);
+ }
+
+ return ret;
+}
+
+static int sdhci_msm_vreg_disable(struct device *dev,
+ struct sdhci_msm_reg_data *vreg)
+{
+ int ret = 0;
+
+ if (!regulator_is_enabled(vreg->reg))
+ return ret;
+
+ /* Set min. voltage to 0 */
+ ret = regulator_set_voltage(vreg->reg, 0, vreg->high_vol_level);
+ if (ret)
+ return ret;
+
+ ret = regulator_disable(vreg->reg);
+ if (ret) {
+ dev_err(dev, "regulator_disable(%s) fail (%d)\n",
+ vreg->name, ret);
+ }
+
+ return ret;
+}
+
+static int sdhci_msm_setup_vreg(struct sdhci_msm_host *msm_host, bool enable)
+{
+ int ret, i;
+ struct sdhci_msm_reg_data *vreg_table[2];
+
+ vreg_table[0] = &msm_host->pdata.vdd;
+ vreg_table[1] = &msm_host->pdata.vdd_io;
+
+ for (i = 0; i < ARRAY_SIZE(vreg_table); i++) {
+ if (enable)
+ ret = sdhci_msm_vreg_enable(&msm_host->pdev->dev,
+ vreg_table[i]);
+ else
+ ret = sdhci_msm_vreg_disable(&msm_host->pdev->dev,
+ vreg_table[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* This init function should be called only once for each SDHC slot */
+static int sdhci_msm_vreg_init(struct device *dev,
+ struct sdhci_msm_pltfm_data *pdata)
+{
+ struct sdhci_msm_reg_data *vdd_reg = &pdata->vdd;
+ struct sdhci_msm_reg_data *vdd_io_reg = &pdata->vdd_io;
+
+ vdd_reg->reg = devm_regulator_get(dev, vdd_reg->name);
+ if (IS_ERR(vdd_reg->reg))
+ return PTR_ERR(vdd_reg->reg);
+
+ vdd_io_reg->reg = devm_regulator_get(dev, vdd_io_reg->name);
+ if (IS_ERR(vdd_io_reg->reg))
+ return PTR_ERR(vdd_io_reg->reg);
+
+ return 0;
+}
+
+static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
+{
+ struct sdhci_host *host = (struct sdhci_host *)data;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ u8 irq_status;
+ u8 irq_ack = 0;
+ int ret = 0;
+
+ irq_status = readb_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
+ dev_dbg(mmc_dev(msm_host->mmc), "%s: Received IRQ(%d), status=0x%x\n",
+ mmc_hostname(msm_host->mmc), irq, irq_status);
+
+ /* Clear the interrupt */
+ writeb_relaxed(irq_status, (msm_host->core_mem + CORE_PWRCTL_CLEAR));
+ /*
+ * SDHC has core_mem and hc_mem device memory and these memory
+ * addresses do not fall within 1KB region. Hence, any update to
+ * core_mem address space would require an mb() to ensure this gets
+ * completed before its next update to registers within hc_mem.
+ */
+ mb();
+
+ /* Handle BUS ON/OFF */
+ if (irq_status & CORE_PWRCTL_BUS_ON) {
+ ret = sdhci_msm_setup_vreg(msm_host, true);
+ if (!ret)
+ ret = regulator_set_voltage(msm_host->pdata.vdd_io.reg,
+ msm_host->pdata.
+ vdd_io.high_vol_level,
+ msm_host->pdata.
+ vdd_io.high_vol_level);
+ if (ret)
+ irq_ack |= CORE_PWRCTL_BUS_FAIL;
+ else
+ irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+ }
+
+ if (irq_status & CORE_PWRCTL_BUS_OFF) {
+ ret = sdhci_msm_setup_vreg(msm_host, false);
+ if (!ret)
+ ret = regulator_set_voltage(msm_host->pdata.vdd_io.reg,
+ msm_host->pdata.
+ vdd_io.low_vol_level,
+ msm_host->pdata.
+ vdd_io.low_vol_level);
+ if (ret)
+ irq_ack |= CORE_PWRCTL_BUS_FAIL;
+ else
+ irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+ }
+
+ /* Handle IO LOW/HIGH */
+ if (irq_status & CORE_PWRCTL_IO_LOW) {
+ ret = regulator_set_voltage(msm_host->pdata.vdd_io.reg,
+ msm_host->pdata.
+ vdd_io.low_vol_level,
+ msm_host->pdata.
+ vdd_io.low_vol_level);
+ if (ret)
+ irq_ack |= CORE_PWRCTL_IO_FAIL;
+ else
+ irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+ }
+
+ if (irq_status & CORE_PWRCTL_IO_HIGH) {
+ ret = regulator_set_voltage(msm_host->pdata.vdd_io.reg,
+ msm_host->pdata.
+ vdd_io.high_vol_level,
+ msm_host->pdata.
+ vdd_io.high_vol_level);
+ if (ret)
+ irq_ack |= CORE_PWRCTL_IO_FAIL;
+ else
+ irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+ }
+
+ /* ACK status to the core */
+ writeb_relaxed(irq_ack, (msm_host->core_mem + CORE_PWRCTL_CTL));
+ /*
+ * SDHC has core_mem and hc_mem device memory and these memory
+ * addresses do not fall within 1KB region. Hence, any update to
+ * core_mem address space would require an mb() to ensure this gets
+ * completed before its next update to registers within hc_mem.
+ */
+ mb();
+
+ dev_dbg(mmc_dev(msm_host->mmc), "%s: Handled IRQ(%d), ret=%d, ack=0x%x\n",
+ mmc_hostname(msm_host->mmc), irq, ret, irq_ack);
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+ { .compatible = "qcom,sdhci-msm" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+ .platform_execute_tuning = sdhci_msm_execute_tuning,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_msm_host *msm_host;
+ struct resource *core_memres = NULL;
+ int ret, dead;
+ u16 host_version;
+
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "No device tree data\n");
+ return -ENOENT;
+ }
+
+ msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+ if (!msm_host)
+ return -ENOMEM;
+
+ msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+ host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+ if (IS_ERR(host)) {
+ dev_err(&pdev->dev, "sdhci_pltfm_init error\n");
+ return PTR_ERR(host);
+ }
+
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = msm_host;
+ msm_host->mmc = host->mmc;
+ msm_host->pdev = pdev;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed parsing mmc device tree\n");
+ goto pltfm_free;
+ }
+
+ sdhci_get_of_property(pdev);
+
+ ret = sdhci_msm_populate_pdata(&pdev->dev, &msm_host->pdata);
+ if (ret) {
+ dev_err(&pdev->dev, "DT parsing error\n");
+ goto pltfm_free;
+ }
+
+ /* Setup SDCC bus voter clock. */
+ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (!IS_ERR(msm_host->bus_clk)) {
+ /* Vote for max. clk rate for max. performance */
+ ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+ if (ret)
+ goto pltfm_free;
+ ret = clk_prepare_enable(msm_host->bus_clk);
+ if (ret)
+ goto pltfm_free;
+ }
+
+ /* Setup main peripheral bus clock */
+ msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+ if (!IS_ERR(msm_host->pclk)) {
+ ret = clk_prepare_enable(msm_host->pclk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Main peripheral clock setup fail (%d)\n", ret);
+ goto bus_clk_disable;
+ }
+ }
+
+ /* Setup SDC MMC clock */
+ msm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(msm_host->clk)) {
+ ret = PTR_ERR(msm_host->clk);
+ dev_err(&pdev->dev, "SDC MMC clock setup fail (%d)\n", ret);
+ goto pclk_disable;
+ }
+
+ ret = clk_prepare_enable(msm_host->clk);
+ if (ret)
+ goto pclk_disable;
+
+ /* Setup regulators */
+ ret = sdhci_msm_vreg_init(&pdev->dev, &msm_host->pdata);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Regulator setup fail (%d)\n", ret);
+ goto clk_disable;
+ }
+
+ core_memres = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "core_mem");
+ msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+ if (IS_ERR(msm_host->core_mem)) {
+ dev_err(&pdev->dev, "Failed to remap registers\n");
+ ret = PTR_ERR(msm_host->core_mem);
+ goto vreg_disable;
+ }
+
+ /* Reset the core and Enable SDHC mode */
+ writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+ CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+ /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+ usleep_range(1000, 5000);
+ if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+ dev_err(&pdev->dev, "Stuck in reset\n");
+ ret = -ETIMEDOUT;
+ goto vreg_disable;
+ }
+
+ /* Set HC_MODE_EN bit in HC_MODE register */
+ writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+ /*
+ * Following are the deviations from SDHC spec v3.0 -
+ * 1. Card detection is handled using separate GPIO.
+ * 2. Bus power control is handled by interacting with PMIC.
+ */
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+ host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+ dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+ host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+ SDHCI_VENDOR_VER_SHIFT));
+
+ /* Setup PWRCTL irq */
+ msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
+ if (msm_host->pwr_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get pwr_irq by name (%d)\n",
+ msm_host->pwr_irq);
+ goto vreg_disable;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
+ sdhci_msm_pwr_irq, IRQF_ONESHOT,
+ dev_name(&pdev->dev), host);
+ if (ret) {
+ dev_err(&pdev->dev, "Request threaded irq(%d) fail (%d)\n",
+ msm_host->pwr_irq, ret);
+ goto vreg_disable;
+ }
+
+ /* Enable pwr irq interrupts */
+ writel_relaxed(INT_MASK, (msm_host->core_mem + CORE_PWRCTL_MASK));
+
+ msm_host->mmc->caps |= msm_host->pdata.caps;
+ msm_host->mmc->caps2 |= msm_host->pdata.caps2;
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_err(&pdev->dev, "Add host fail (%d)\n", ret);
+ goto vreg_disable;
+ }
+
+ ret = clk_set_rate(msm_host->clk, host->max_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "MClk rate set fail (%d)\n", ret);
+ goto remove_host;
+ }
+
+ return 0;
+
+remove_host:
+ dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+ sdhci_remove_host(host, dead);
+vreg_disable:
+ if (!IS_ERR(msm_host->pdata.vdd.reg))
+ sdhci_msm_vreg_disable(&pdev->dev, &msm_host->pdata.vdd);
+ if (!IS_ERR(msm_host->pdata.vdd_io.reg))
+ sdhci_msm_vreg_disable(&pdev->dev, &msm_host->pdata.vdd_io);
+clk_disable:
+ if (!IS_ERR(msm_host->clk))
+ clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+ if (!IS_ERR(msm_host->pclk))
+ clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
+ 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+ sdhci_pltfm_free(pdev);
+ sdhci_msm_vreg_disable(&pdev->dev, &msm_host->pdata.vdd);
+ sdhci_msm_vreg_disable(&pdev->dev, &msm_host->pdata.vdd_io);
+ clk_disable_unprepare(msm_host->clk);
+ clk_disable_unprepare(msm_host->pclk);
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+ return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+ .probe = sdhci_msm_probe,
+ .remove = sdhci_msm_remove,
+ .driver = {
+ .name = "sdhci_msm",
+ .owner = THIS_MODULE,
+ .of_match_table = sdhci_msm_dt_match,
+ },
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
