On 01/15, Stephen Boyd wrote:
>
> Ah sorry, I forgot to put the compatible property here like in
> the dts change. I'll do that in the next revision. Yes we need a
> compatible property here to match the platform driver.
>
This is the replacement patch
-----8<------
From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Subject: [PATCH v9] devicetree: bindings: Document Krait CPU/L1 EDAC
The Krait CPU/L1 error reporting device is made up a per-CPU
interrupt. While we're here, document the next-level-cache
property that's used by the Krait EDAC driver.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: <devicetree@xxxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/cpus.txt | 58 ++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91304353eea4..03a529e791c4 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -62,6 +62,20 @@ nodes to be present and contain the properties described below.
Value type: <u32>
Definition: must be set to 0
+ - compatible
+ Usage: optional
+ Value type: <string>
+ Definition: should be one of the compatible strings listed
+ in the cpu node compatible property. This property
+ shall only be present if all the cpu nodes have the
+ same compatible property.
+
+ - interrupts
+ Usage: required when node contains cpus with compatible
+ string "qcom,krait".
+ Value type: <prop-encoded-array>
+ Definition: L1/CPU error interrupt
+
- cpu node
Description: Describes a CPU in an ARM based system
@@ -191,6 +205,11 @@ nodes to be present and contain the properties described below.
property identifying a 64-bit zero-initialised
memory location.
+ - next-level-cache
+ Usage: optional
+ Value type: <phandle>
+ Definition: phandle pointing to the next level cache
+
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {
@@ -382,3 +401,42 @@ cpus {
cpu-release-addr = <0 0x20000000>;
};
};
+
+
+Example 5 (Krait 32-bit system):
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <1 9 0xf04>;
+ compatible = "qcom,krait";
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ interrupts = <0 2 0x4>;
+ };
+};
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
