Couple little patches, plus work-in-progress DT file for the IFC6410. With this, plus the msm clk support[1], I have serial console working on top of 3.13-rc4. The debug UART patch is not strictly required, but it is a lot easier to debug when you can see what is going on in early boot before the serial driver is up. [1] http://www.spinics.net/lists/devicetree/msg08409.html Rob Clark (3): mach-msm: add aqp8064 debug uart mach-msm: enable sparsemem for 8960 RFC: mach-msm: add DT for ifc6410 (apq8064) arch/arm/Kconfig.debug | 9 ++ arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 131 +++++++++++++++++++++++++++++ arch/arm/include/debug/msm.S | 5 ++ arch/arm/mach-msm/Kconfig | 3 + arch/arm/mach-msm/board-dt.c | 1 + arch/arm/mach-msm/include/mach/memory.h | 22 +++++ 6 files changed, 171 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts create mode 100644 arch/arm/mach-msm/include/mach/memory.h -- 1.8.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
