On 9/6/2013 2:50 PM, Olof Johansson wrote:
Hi,
Some comments below.
On Fri, Sep 06, 2013 at 12:32:22PM -0700, Rohit Vaswani wrote:
This patch adds basic board support for APQ8074 Dragonboard
<snip>
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
- msm8960-cdp.dtb
+ msm8960-cdp.dtb \
+ apq8074-dragonboard.dtb
Please add boards alphabetically.
Will do.
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-rd.dtb \
diff --git a/arch/arm/boot/dts/apq8074-dragonboard.dts b/arch/arm/boot/dts/apq8074-dragonboard.dts
new file mode 100644
index 0000000..5b7b6a0
--- /dev/null
+++ b/arch/arm/boot/dts/apq8074-dragonboard.dts
arch/arm/boot/dts/ is getting really crowded. It's been working best if the SoC
family or vendor is used as a prefix to keep things a bit more organized. In
that spirit, prefixing these with msm-<foo> makes sense. Can you please do so?
Sure. But the board is called an APQ8074 and we wanted to keep the
naming consistent with that.
@@ -0,0 +1,6 @@
+/include/ "msm8974.dtsi"
+
+/ {
+ model = "Qualcomm APQ8074 Dragonboard";
+ compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+};
Ok, I'm all for merging a early minimal dts file, but things like memory and
a default bootargs tend to make sense.
diff --git a/arch/arm/boot/dts/msm8974.dtsi b/arch/arm/boot/dts/msm8974.dtsi
new file mode 100644
index 0000000..f04b643
--- /dev/null
+++ b/arch/arm/boot/dts/msm8974.dtsi
@@ -0,0 +1,35 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8974";
+ compatible = "qcom,msm8974";
the board uses "qcom,apq8074" and this overrides this. Which way is it?
So, MSM8974 is the base chip. The APQ8074 is a board based on it with
the modem fused. So, apq8074 board compatible overrides the generic chip
compatible.
+ interrupt-parent = <&intc>;
+
+ soc: soc { };
For files that include this it's ok to use the &phandle syntax, but in this
base dtsi, please use proper structure. In other words, move the contents of
the soc node up above instead.
Will do.
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <19200000>;
+ };
+};
It'd make a lot of sense to include at least cpu nodes here as well, and
ideally basics for the drivers you have already merged, such as uarts.
Those are scheduled next as separate patches with some additional changes.
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 905efc8..499e8fe 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
if ARCH_MSM
comment "Qualcomm MSM SoC Type"
- depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+ depends on ARCH_MSM_DT
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+ depends on !ARCH_MSM_DT
This has nothing to do with adding support for dragonboard. Please break
out the cleanup separately.
I'm not sure what the purpose of ARCH_MSM_DT is either, it just looks to
complicate matter here?
ARCH_MSM_DT is just a combined config to denote the targets that have DT
support instead of ORing the chip configs.
+config ARCH_MSM8974
+ bool "MSM8974"
+ select ARM_GIC
+ select CPU_V7
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_SMP
+ select MSM_SCM if SMP
+ select USE_OF
+
+config ARCH_MSM_DT
+ def_bool y
+ depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
+
config MSM_HAS_DEBUG_UART_HS
bool
@@ -68,6 +81,7 @@ config MSM_SOC_REV_A
config ARCH_MSM_ARM11
bool
+
config ARCH_MSM_SCORPION
bool
@@ -75,6 +89,7 @@ config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
+ depends on !ARCH_MSM_DT
config MACH_HALIBUT
depends on ARCH_MSM
@@ -122,6 +137,7 @@ config MSM_SMD
config MSM_GPIOMUX
bool
+ depends on !ARCH_MSM_DT
help
Support for MSM V1 TLMM GPIOMUX architecture.
All of the above should be in a separate patch and motivated.
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d257ff4..80e3b15 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM8974) += board-dt-8974.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c
new file mode 100644
index 0000000..01ed8d0
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8974.c
@@ -0,0 +1,24 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const msm8974_dt_match[] __initconst = {
+ "qcom,msm8974",
+ "qcom,apq8074",
+ NULL
+};
+
+DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .dt_compat = msm8974_dt_match,
+MACHINE_END
This file should be shared across SoCs. You should avoid adding a new dt board
file for every SoC like this.
Will club these changes with the ARCH_MSM_DT seperation and send that
out as a precursor patch to 8074 support.
-Olof
Thanks,
Rohit Vaswani
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
