On Fri, Aug 09, 2013 at 01:37:09PM -0700, Josh Cartwright wrote:
> --- /dev/null
> +++ b/drivers/of/of_spmi.c
> @@ -0,0 +1,74 @@
> +/* Copyright (c) 2012,2013 The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define pr_fmt(fmt) "%s: " fmt, __func__
As you never make a pr_* call in this file, this line isn't needed.
> +++ b/drivers/spmi/spmi-dbgfs.c
> @@ -0,0 +1,591 @@
> +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define pr_fmt(fmt) "%s:%d: " fmt, __func__, __LINE__
__func__ and __LINE__? Is that really needed, what will it help with?
Seems like extra noise, especially as you only have a few pr_* calls in
this file:
> +static int
> +spmi_read_data(struct spmi_device *sdev, uint8_t *buf, int offset, int cnt)
> +{
> + int ret = 0;
> + int len;
> + uint16_t addr;
> +
> + while (cnt > 0) {
> + addr = offset & 0xFFFF;
> + len = min(cnt, MAX_REG_PER_TRANSACTION);
> +
> + ret = spmi_ext_register_readl(sdev, addr, buf, len);
> + if (ret < 0) {
> + pr_err("SPMI read failed, err = %d\n", ret);
Should be using dev_err() instead.
> +/**
> + * spmi_write_data: writes data across the SPMI bus
> + * @ctrl: The SPMI controller
> + * @buf: data to be written.
> + * @offset: SPMI address offset to start writing to.
> + * @cnt: The number of bytes to write.
> + *
> + * Returns 0 on success, otherwise returns error code from SPMI driver.
> + */
> +static int
> +spmi_write_data(struct spmi_device *sdev, uint8_t *buf, int offset, int cnt)
> +{
> + int ret = 0;
> + int len;
> + uint16_t addr;
> +
> + while (cnt > 0) {
> + addr = offset & 0xFFFF;
> + len = min(cnt, MAX_REG_PER_TRANSACTION);
> +
> + ret = spmi_ext_register_writel(sdev, addr, buf, len);
> + if (ret < 0) {
> + pr_err("SPMI write failed, err = %d\n", ret);
Same, dev_err() please.
> +static ssize_t spmi_device_dfs_reg_write(struct file *file,
> + const char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + int bytes_read;
> + int data;
> + int pos = 0;
> + int cnt = 0;
> + u8 *values;
> + size_t ret = 0;
> +
> + struct spmi_trans *trans = file->private_data;
> + u32 offset = trans->offset;
> +
> + /* Make a copy of the user data */
> + char *kbuf = kmalloc(count + 1, GFP_KERNEL);
> + if (!kbuf)
> + return -ENOMEM;
> +
> + ret = copy_from_user(kbuf, buf, count);
> + if (ret == count) {
> + pr_err("failed to copy data from user\n");
No need for a message here at all, you will get a message in the
function if something happened wrong.
Also, shouldn't it just be a simple:
if (copy_from_user()) {
test?
> + ret = -EFAULT;
> + goto free_buf;
> + }
> +
> + count -= ret;
> + *ppos += count;
> + kbuf[count] = '\0';
> +
> + /* Override the text buffer with the raw data */
> + values = kbuf;
> +
> + /* Parse the data in the buffer. It should be a string of numbers */
> + while (sscanf(kbuf + pos, "%i%n", &data, &bytes_read) == 1) {
> + pos += bytes_read;
> + values[cnt++] = data & 0xff;
> + }
> +
> + if (!cnt)
> + goto free_buf;
> +
> + /* Perform the SPMI write(s) */
> + ret = spmi_write_data(trans->sdev, values, offset, cnt);
> +
> + if (ret) {
> + pr_err("SPMI write failed, err = %zu\n", ret);
dev_err() please.
> +static ssize_t spmi_device_dfs_reg_read(struct file *file, char __user *buf,
> + size_t count, loff_t *ppos)
> +{
> + struct spmi_trans *trans = file->private_data;
> + struct spmi_log_buffer *log = trans->log;
> + size_t ret;
> + size_t len;
> +
> + /* Is the the log buffer empty */
> + if (log->rpos >= log->wpos) {
> + if (get_log_data(trans) <= 0)
> + return 0;
> + }
> +
> + len = min(count, (size_t) log->wpos - log->rpos);
> +
> + ret = copy_to_user(buf, &log->data[log->rpos], len);
> + if (ret == len) {
> + pr_err("error copy SPMI register values to user\n");
Same comments as above.
> +void __exit spmi_dfs_exit(void)
> +{
> + pr_debug("de-initializing spmi debugfs ...");
Not needed, use the in-kernel trace functionality if you really want to
know this.
> + debugfs_remove_recursive(spmi_debug_root);
> +}
> +
> +void __init spmi_dfs_init(void)
> +{
> + struct dentry *help;
> +
> + pr_debug("creating SPMI debugfs file-system\n");
Same as above, not needed.
So, with those changes, pr_fmt() isn't needed at all :)
> --- /dev/null
> +++ b/drivers/spmi/spmi-dbgfs.h
> @@ -0,0 +1,37 @@
> +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef _SPMI_DBGFS_H
> +#define _SPMI_DBGFS_H
> +
> +#include <linux/spmi.h>
> +#include <linux/debugfs.h>
> +
> +#ifdef CONFIG_DEBUG_FS
Why? If debugfs isn't enabled, the functions should just compile away
with the debugfs_() calls, so no need to do this type of thing here,
right?
> +
> +extern void __init spmi_dfs_init(void);
> +extern void __exit spmi_dfs_exit(void);
> +extern void spmi_dfs_add_controller(struct spmi_controller *ctrl);
> +extern void spmi_dfs_del_controller(struct spmi_controller *ctrl);
> +extern void spmi_dfs_add_device(struct spmi_device *sdev);
> +extern void spmi_dfs_del_device(struct spmi_device *sdev);
> +
> +#else
> +
> +static inline void __init spmi_dfs_init(void) { }
> +static inline void __exit spmi_dfs_exit(void) { }
> +static inline void spmi_dfs_add_controller(struct spmi_controller *ctrl) { }
> +static inline void spmi_dfs_del_controller(struct spmi_controller *ctrl) { }
> +static inline void spmi_dfs_add_device(struct spmi_device *sdev) { }
> +static inline void spmi_dfs_del_device(struct spmi_device *sdev) { }
> +#endif
> +
> +#endif /* _SPMI_DBGFS_H */
> diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
> new file mode 100644
> index 0000000..3bbcc63
> --- /dev/null
> +++ b/drivers/spmi/spmi.c
> @@ -0,0 +1,449 @@
> +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#define pr_fmt(fmt) "%s: " fmt, __func__
Again, not needed for this file, because:
> +int spmi_add_controller(struct spmi_controller *ctrl)
> +{
> + int id;
> +
> + pr_debug("adding controller for bus %d (0x%p)\n", ctrl->nr, ctrl);
dev_dbg() if you really need/want it.
> +
> + if (((int)ctrl->nr) < 0) {
> + pr_err("invalid bus identifier %d\n", ctrl->nr);
dev_err() please.
> + return -EINVAL;
> + }
> +
> + idr_preload(GFP_KERNEL);
> + mutex_lock(&board_lock);
> + id = idr_alloc(&ctrl_idr, ctrl, ctrl->nr, ctrl->nr + 1, GFP_NOWAIT);
> + mutex_unlock(&board_lock);
> + idr_preload_end();
> +
> + if (id < 0) {
> + pr_err(
> + "idr_alloc(start:%d end:%d):%d at spmi_add_controller()\n",
> + ctrl->nr, ctrl->nr, id);
dev_err() please.
And then the pr_fmt() line can be removed.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
