On Wednesday 19 June 2013, Stephen Boyd wrote: > This patchset allows me to compile and run the DT based MSM > platforms in the multi-platform ARM kernel. This is built on > top of a couple patches I've sent out already (specifically > the debug_ll patch series and the clocksource_of conversion) > as well a patch from Rohit that didn't seem to make it into > MSM's for-next branch. Very nice! > There is one problem though, the last two patches cause compile > failures if you turn on MSM's sdcc or USB_OTG driver. It seems > that the sdcc driver depends on the clk_reset() API and the custom > DMA interface provided by mach layers. And the USB_OTG driver depends > on clk_reset. > > The simplest solution is to make these two drivers depend on the > non-dt based MSM support so that they can't be compiled in the > multi-platform config. Otherwise, we'll need to replace the clk_reset() > calls with the new reset controller API, but doing that would > require us to convert all MSM platforms over to devicetree or > we'll need to add support to the reset controller API for non-DT based > controllers. Even with that, the sdcc driver uses custom DMA things > so we may need to put that all behind some #ifdef. The msm_serial_hs driver also seems to require the custom DMA interface. I think for the DMA stuff, the solution is clearly to move that driver to use the dmaengine API, wich I assume you are already planning to do anyway. Do you have a time line for that? For the clk_reset interface, maybe you can move those calls int platform_data callbacks for the non-DT machines to get them out of the way? You could have something like if (pdata && pdata->reset) pdata->reset(dev, clk); else reset_device(dev); That wouldn't be too ugly. For the time being, disabling the drivers on multiplatform sounds reasonable. I don't think you actually have to have the drivers conflict with DT support: you should be able to allow the DT based boards with non-multiplatform to enable the two or three drivers anyway. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html