Following are the changes we have done from the previous v1 posted here: https://lkml.org/lkml/2011/12/22/148 As our ADM Scatter-gather hardware needs -32-bit command configuration parameter apart from -32-bit source address -32-bit destination address -16-bit length So,we have added new parameter in struct scatterlist to support xfer descriptor specific private data, and for supporting ADM Box mode DMA we added new API and data structure. Changes done from v2: As per our previous discussion you had suggested us to follow the below patch https://lkml.org/lkml/2012/1/26/405 Please check the below link of our discussion https://lkml.org/lkml/2012/1/30/48 So we have added the new context parameter in device_prep_dma_sg and device_prep_interleave_dma API's to support for passing client channel specific private data associated with every transfer descriptor. We are using Interleaved API for BOX type transfer. SG API for SG type transfer. Ravi Kumar V (2): dmaengine: Add support for per xfer specific privatedata DMAEngine: Add DMAEngine driver based on old MSM DMA APIs arch/arm/mach-msm/include/mach/dma.h | 30 ++ drivers/dma/Kconfig | 12 + drivers/dma/Makefile | 1 + drivers/dma/msm-dma.c | 724 ++++++++++++++++++++++++++++++++++ include/linux/dmaengine.h | 4 +- 5 files changed, 769 insertions(+), 2 deletions(-) create mode 100644 drivers/dma/msm-dma.c -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
