On 21/08/2024 10:38, Krzysztof Kozlowski wrote:
> On Tue, Aug 20, 2024 at 04:36:10PM +0200, Andrea della Porta wrote:
...
>> drivers/misc/Kconfig | 1 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/rp1/Kconfig | 20 ++
>> drivers/misc/rp1/Makefile | 3 +
>> drivers/misc/rp1/rp1-pci.c | 333 ++++++++++++++++++++++++++
>> drivers/misc/rp1/rp1-pci.dtso | 8 +
>> drivers/pci/quirks.c | 1 +
>> include/linux/pci_ids.h | 3 +
>> 10 files changed, 524 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
>> create mode 100644 drivers/misc/rp1/Kconfig
>> create mode 100644 drivers/misc/rp1/Makefile
>> create mode 100644 drivers/misc/rp1/rp1-pci.c
>> create mode 100644 drivers/misc/rp1/rp1-pci.dtso
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 67f460c36ea1..1359538b76e8 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19119,9 +19119,11 @@ F: include/uapi/linux/media/raspberrypi/
>> RASPBERRY PI RP1 PCI DRIVER
>> M: Andrea della Porta <andrea.porta@xxxxxxxx>
>> S: Maintained
>> +F: arch/arm64/boot/dts/broadcom/rp1.dtso
>> F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
>> F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
>> F: drivers/clk/clk-rp1.c
>> +F: drivers/misc/rp1/
>> F: drivers/pinctrl/pinctrl-rp1.c
>> F: include/dt-bindings/clock/rp1.h
>> F: include/dt-bindings/misc/rp1.h
>> diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
>> new file mode 100644
>> index 000000000000..d80178a278ee
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
>> @@ -0,0 +1,152 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/clock/rp1.h>
>> +#include <dt-bindings/misc/rp1.h>
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +/ {
>> + fragment@0 {
>> + target-path="";
>> + __overlay__ {
>> + #address-cells = <3>;
>> + #size-cells = <2>;
>> +
>> + rp1: rp1@0 {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + interrupt-controller;
>> + interrupt-parent = <&rp1>;
>> + #interrupt-cells = <2>;
>> +
>> + // ranges and dma-ranges must be provided by the includer
>> + ranges = <0xc0 0x40000000
>> + 0x01/*0x02000000*/ 0x00 0x00000000
>> + 0x00 0x00400000>;
>
> Are you 100% sure you do not have here dtc W=1 warnings?
One more thing, I do not see this overlay applied to any target, which
means it cannot be tested. You miss entry in Makefile.
Best regards,
Krzysztof
