Re: [PATCH v9 05/39] arm64/gcs: Document the ABI for Guarded Control Stacks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/25/24 7:57 AM, Mark Brown wrote:
> Add some documentation of the userspace ABI for Guarded Control Stacks.
> 
> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@xxxxxxxxxx>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
> ---
>  Documentation/arch/arm64/gcs.rst   | 233 +++++++++++++++++++++++++++++++++++++
>  Documentation/arch/arm64/index.rst |   1 +
>  2 files changed, 234 insertions(+)
> 
> diff --git a/Documentation/arch/arm64/gcs.rst b/Documentation/arch/arm64/gcs.rst
> new file mode 100644
> index 000000000000..c45c0326836a
> --- /dev/null
> +++ b/Documentation/arch/arm64/gcs.rst
> @@ -0,0 +1,233 @@
> +===============================================
> +Guarded Control Stack support for AArch64 Linux
> +===============================================
> +
> +This document outlines briefly the interface provided to userspace by Linux in
> +order to support use of the ARM Guarded Control Stack (GCS) feature.
> +
> +This is an outline of the most important features and issues only and not
> +intended to be exhaustive.
> +
> +
> +
> +1.  General
> +-----------
> +
> +* GCS is an architecture feature intended to provide greater protection
> +  against return oriented programming (ROP) attacks and to simplify the
> +  implementation of features that need to collect stack traces such as
> +  profiling.
> +
> +* When GCS is enabled a separate guarded control stack is maintained by the
> +  PE which is writeable only through specific GCS operations.  This
> +  stores the call stack only, when a procedure call instruction is

                           only. When

> +  performed the current PC is pushed onto the GCS and on RET the
> +  address in the LR is verified against that on the top of the GCS.
> +
> +* When active current GCS pointer is stored in the system register

     Cannot parse this incomplete sentence...

> +  GCSPR_EL0.  This is readable by userspace but can only be updated
> +  via specific GCS instructions.
> +
> +* The architecture provides instructions for switching between guarded
> +  control stacks with checks to ensure that the new stack is a valid
> +  target for switching.
> +
> +* The functionality of GCS is similar to that provided by the x86 Shadow
> +  Stack feature, due to sharing of userspace interfaces the ABI refers to

           feature. Due to

> +  shadow stacks rather than GCS.
> +
> +* Support for GCS is reported to userspace via HWCAP2_GCS in the aux vector
> +  AT_HWCAP2 entry.
> +
> +* GCS is enabled per thread.  While there is support for disabling GCS
> +  at runtime this should be done with great care.
> +
> +* GCS memory access faults are reported as normal memory access faults.
> +
> +* GCS specific errors (those reported with EC 0x2d) will be reported as
> +  SIGSEGV with a si_code of SEGV_CPERR (control protection error).
> +
> +* GCS is supported only for AArch64.
> +
> +* On systems where GCS is supported GCSPR_EL0 is always readable by EL0
> +  regardless of the GCS configuration for the thread.
> +
> +* The architecture supports enabling GCS without verifying that return values
> +  in LR match those in the GCS, the LR will be ignored.  This is not supported

                              GCS; the LR

> +  by Linux.
> +
> +* EL0 GCS entries with bit 63 set are reserved for use, one such use is defined

                                                  for use. One such

> +  below for signals and should be ignored when parsing the stack if not
> +  understood.
> +
> +
> +2.  Enabling and disabling Guarded Control Stacks
> +-------------------------------------------------
> +
> +* GCS is enabled and disabled for a thread via the PR_SET_SHADOW_STACK_STATUS
> +  prctl(), this takes a single flags argument specifying which GCS features

     prctl(). This takes

> +  should be used.
> +
> +* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack
> +  and enables GCS for the thread, enabling the functionality controlled by
> +  GCSCRE0_EL1.{nTR, RVCHKEN, PCRSEL}.
> +
> +* When set the PR_SHADOW_STACK_PUSH flag enables the functionality controlled
> +  by GCSCRE0_EL1.PUSHMEn, allowing explicit GCS pushes.
> +
> +* When set the PR_SHADOW_STACK_WRITE flag enables the functionality controlled
> +  by GCSCRE0_EL1.STREn, allowing explicit stores to the Guarded Control Stack.
> +
> +* Any unknown flags will cause PR_SET_SHADOW_STACK_STATUS to return -EINVAL.
> +
> +* PR_LOCK_SHADOW_STACK_STATUS is passed a bitmask of features with the same
> +  values as used for PR_SET_SHADOW_STACK_STATUS.  Any future changes to the
> +  status of the specified GCS mode bits will be rejected.
> +
> +* PR_LOCK_SHADOW_STACK_STATUS allows any bit to be locked, this allows

                                                      locked; this allows

> +  userspace to prevent changes to any future features.
> +
> +* There is no support for a process to remove a lock that has been set for
> +  it.
> +
> +* PR_SET_SHADOW_STACK_STATUS and PR_LOCK_SHADOW_STACK_STATUS affect only the
> +  thread that called them, any other running threads will be unaffected.

                        them; any other

> +
> +* New threads inherit the GCS configuration of the thread that created them.
> +
> +* GCS is disabled on exec().
> +
> +* The current GCS configuration for a thread may be read with the
> +  PR_GET_SHADOW_STACK_STATUS prctl(), this returns the same flags that

                                prctl(). This

> +  are passed to PR_SET_SHADOW_STACK_STATUS.
> +
> +* If GCS is disabled for a thread after having previously been enabled then
> +  the stack will remain allocated for the lifetime of the thread.  At present
> +  any attempt to reenable GCS for the thread will be rejected, this may be

                                                        rejected; this

> +  revisited in future.
> +
> +* It should be noted that since enabling GCS will result in GCS becoming
> +  active immediately it is not normally possible to return from the function
> +  that invoked the prctl() that enabled GCS.  It is expected that the normal
> +  usage will be that GCS is enabled very early in execution of a program.
> +
> +
> +
> +3.  Allocation of Guarded Control Stacks
> +----------------------------------------
> +
> +* When GCS is enabled for a thread a new Guarded Control Stack will be
> +  allocated for it of size RLIMIT_STACK or 4 gigabytes, whichever is
> +  smaller.
> +
> +* When a new thread is created by a thread which has GCS enabled then a
> +  new Guarded Control Stack will be allocated for the new thread with
> +  half the size of the standard stack.
> +
> +* When a stack is allocated by enabling GCS or during thread creation then
> +  the top 8 bytes of the stack will be initialised to 0 and GCSPR_EL0 will
> +  be set to point to the address of this 0 value, this can be used to

                                              value. This can be

> +  detect the top of the stack.
> +
> +* Additional Guarded Control Stacks can be allocated using the
> +  map_shadow_stack() system call.
> +
> +* Stacks allocated using map_shadow_stack() can optionally have an end of
> +  stack marker and cap placed at the top of the stack.  If the flag
> +  SHADOW_STACK_SET_TOKEN is specified a cap will be placed on the stack,

                                                                     stack;

> +  if SHADOW_STACK_SET_MARKER is not specified the cap will be the top 8
> +  bytes of the stack and if it is specified then the cap will be the next
> +  8 bytes.  While specifying just SHADOW_STACK_SET_MARKER by itself is
> +  valid since the marker is all bits 0 it has no observable effect.
> +
> +* Stacks allocated using map_shadow_stack() must have a size which is a
> +  multiple of 8 bytes larger than 8 bytes and must be 8 bytes aligned.
> +
> +* An address can be specified to map_shadow_stack(), if one is provided then

                                    map_shadow_stack(). If one

> +  it must be aligned to a page boundary.
> +
> +* When a thread is freed the Guarded Control Stack initially allocated for
> +  that thread will be freed.  Note carefully that if the stack has been
> +  switched this may not be the stack currently in use by the thread.
> +
> +
> +4.  Signal handling
> +--------------------
> +
> +* A new signal frame record gcs_context encodes the current GCS mode and
> +  pointer for the interrupted context on signal delivery.  This will always
> +  be present on systems that support GCS.
> +
> +* The record contains a flag field which reports the current GCS configuration
> +  for the interrupted context as PR_GET_SHADOW_STACK_STATUS would.
> +
> +* The signal handler is run with the same GCS configuration as the interrupted
> +  context.
> +
> +* When GCS is enabled for the interrupted thread a signal handling specific
> +  GCS cap token will be written to the GCS, this is an architectural GCS cap

                                          GCS. This is

> +  token with bit 63 set and the token type (bits 0..11) all clear.  The
> +  GCSPR_EL0 reported in the signal frame will point to this cap token.
> +
> +* The signal handler will use the same GCS as the interrupted context.
> +
> +* When GCS is enabled on signal entry a frame with the address of the signal
> +  return handler will be pushed onto the GCS, allowing return from the signal
> +  handler via RET as normal.  This will not be reported in the gcs_context in
> +  the signal frame.
> +
> +
> +5.  Signal return
> +-----------------
> +
> +When returning from a signal handler:
> +
> +* If there is a gcs_context record in the signal frame then the GCS flags
> +  and GCSPR_EL0 will be restored from that context prior to further
> +  validation.
> +
> +* If there is no gcs_context record in the signal frame then the GCS
> +  configuration will be unchanged.
> +
> +* If GCS is enabled on return from a signal handler then GCSPR_EL0 must
> +  point to a valid GCS signal cap record, this will be popped from the

                                     record; this will be

> +  GCS prior to signal return.
> +
> +* If the GCS configuration is locked when returning from a signal then any
> +  attempt to change the GCS configuration will be treated as an error.  This
> +  is true even if GCS was not enabled prior to signal entry.
> +
> +* GCS may be disabled via signal return but any attempt to enable GCS via
> +  signal return will be rejected.
> +
> +
> +6.  ptrace extensions
> +---------------------
> +
> +* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
> +  PTRACE_SETREGSET.
> +
> +* Due to the complexity surrounding allocation and deallocation of stacks and
> +  lack of practical application it is not possible to enable GCS via ptrace.
> +  GCS may be disabled via the ptrace interface.
> +
> +* Other GCS modes may be configured via ptrace.
> +
> +* Configuration via ptrace ignores locking of GCS mode bits.
> +
> +
> +7.  ELF coredump extensions
> +---------------------------
> +
> +* NT_ARM_GCS notes will be added to each coredump for each thread of the
> +  dumped process.  The contents will be equivalent to the data that would
> +  have been read if a PTRACE_GETREGSET of the corresponding type were
> +  executed for each thread when the coredump was generated.
> +
> +
> +
> +8.  /proc extensions
> +--------------------
> +
> +* Guarded Control Stack pages will include "ss" in their VmFlags in
> +  /proc/<pid>/smaps.


-- 
~Randy




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux