Re: [PATCH v2 05/28] spi: dt-bindings: samsung: add samsung,spi-fifosize property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/25/24 17:45, Mark Brown wrote:
> On Thu, Jan 25, 2024 at 05:30:53PM +0000, Tudor Ambarus wrote:
>> On 1/25/24 17:26, Mark Brown wrote:
> 
>>> OK, so just the compatible is enough information then?
> 
>> For gs101, yes. All the gs101 SPI instances are configured with 64 bytes
>> FIFO depths. So instead of specifying the FIFO depth for each SPI node,
>> we can infer the FIFO depth from the compatible.
> 
> But this is needed for other SoCs?  This change is scattered through a

There are SoCs that have multiple instances of the SPI IP, and they
configure them with different FIFO depths. See
"samsung,exynosautov9-spi" for example: SPI0, SPI1, and SPI6 are
configured by the SoC to use 256 bytes FIFO depths, while all the other
8 SPI instances use 64 bytes FIFOs. I tried to explain the entire logic
of the series in another reply, see it here:
https://lore.kernel.org/linux-arm-kernel/40ba9481-4aea-4a72-87bd-c2db319be069@xxxxxxxxxx/T/#u

> very large series which does multiple things so it's a bit difficult to
> follow what's going on here.

Sorry, I was afraid that this might happen. I agree, I'll split tomorrow
this patch set in 3 smaller sets:
1/ dumb cleaning patches
2/ heavy lifting cleaning patches
3/ gs101 addition




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux