Re: [PATCH RFC v3 01/21] ACPI: Only enumerate enabled (or functional) devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 14, 2023 at 05:32:41PM +0000, Jonathan Cameron wrote:
> On Wed, 13 Dec 2023 12:49:16 +0000
> Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx> wrote:
> 
> > From: James Morse <james.morse@xxxxxxx>
> > 
> > Today the ACPI enumeration code 'visits' all devices that are present.
> > 
> > This is a problem for arm64, where CPUs are always present, but not
> > always enabled. When a device-check occurs because the firmware-policy
> > has changed and a CPU is now enabled, the following error occurs:
> > | acpi ACPI0007:48: Enumeration failure
> > 
> > This is ultimately because acpi_dev_ready_for_enumeration() returns
> > true for a device that is not enabled. The ACPI Processor driver
> > will not register such CPUs as they are not 'decoding their resources'.
> > 
> > Change acpi_dev_ready_for_enumeration() to also check the enabled bit.
> > ACPI allows a device to be functional instead of maintaining the
> > present and enabled bit. Make this behaviour an explicit check with
> > a reference to the spec, and then check the present and enabled bits.
> > This is needed to avoid enumerating present && functional devices that
> > are not enabled.
> > 
> > Signed-off-by: James Morse <james.morse@xxxxxxx>
> > Tested-by: Miguel Luis <miguel.luis@xxxxxxxxxx>
> > Tested-by: Vishnu Pajjuri <vishnu@xxxxxxxxxxxxxxxxxxxxxx>
> > Tested-by: Jianyong Wu <jianyong.wu@xxxxxxx>
> > Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
> > ---
> > If this change causes problems on deployed hardware, I suggest an
> > arch opt-in: ACPI_IGNORE_STA_ENABLED, that causes
> > acpi_dev_ready_for_enumeration() to only check the present bit.
> 
> My gut feeling (having made ACPI 'fixes' in the past that ran into
> horribly broken firmware and had to be reverted) is reduce the blast
> radius preemptively from the start. I'd love to live in a world were
> that wasn't necessary but I don't trust all the generators of ACPI tables.
> I'll leave it to Rafael and other ACPI experts suggest how narrow we should
> make it though - arch opt in might be narrow enough.

Yes, I think an arch opt-in would be the most sensible way forward, if
Rafael concurs with that idea. I notice that what I wrote there was
actually an opt-out. I'll fix that.

> > +	/*
> > +	 * ACPI 6.5's 6.3.7 "_STA (Device Status)" allows firmware to return
> > +	 * (!present && functional) for certain types of devices that should be
> > +	 * enumerated. Note that the enabled bit can't be sert until the present
> 
> set until

Thanks for spotting that, fixed.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux