Re: [PATCH] riscv: pageattr: Fixup synchronization problem between init_mm and active_mm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ fixed Paul's address


On 05/07/2023 11:15, Guo Ren wrote:
On Wed, Jul 5, 2023 at 3:01 PM Alexandre Ghiti <alex@xxxxxxxx> wrote:

On 04/07/2023 04:25, Guo Ren wrote:
On Mon, Jul 3, 2023 at 6:17 PM Alexandre Ghiti <alex@xxxxxxxx> wrote:
Hi Guo,

On 29/06/2023 10:20, guoren@xxxxxxxxxx wrote:
From: Guo Ren <guoren@xxxxxxxxxxxxxxxxx>

The machine_kexec() uses set_memory_x to add the executable attribute to the
page table entry of control_code_buffer. It only modifies the init_mm but not
the current->active_mm. The current kexec process won't use init_mm directly,
and it depends on minor_pagefault, which is removed by commit 7d3332be011e4
Is the removal of minor_pagefault an issue? I'm not sure I understand
this part of the changelog.
I use two different work-around patches to answer your question:
1st:
-----
diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c
index 705d63a59aec..b8b200c81606 100644
--- a/arch/riscv/mm/fault.c
+++ b/arch/riscv/mm/fault.c
@@ -249,7 +249,7 @@ void handle_page_fault(struct pt_regs *regs)
* only copy the information from the master page table,
* nothing more.
*/
- if (unlikely((addr >= VMALLOC_START) && (addr < VMALLOC_END))) {
+ if (unlikely(addr >= 0x8000000000000000UL)) {
vmalloc_fault(regs, code, addr);
return;
}
------

2nd:
------
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 8e65f0a953e5..270f50852886 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -1387,7 +1387,7 @@ static void __init create_linear_mapping_page_table(void)
if (end >= __pa(PAGE_OFFSET) + memory_limit)
end = __pa(PAGE_OFFSET) + memory_limit;

- create_linear_mapping_range(start, end, 0);
+ create_linear_mapping_range(start, end, PMD_SIZE);
}

#ifdef CONFIG_STRICT_KERNEL_RWX
-----

The removal of minor_pagefault could be an issue, but in this case
it's the VMALLOC_START/END which prevents the minor_pagefault at
first. I didn't say commit 7d3332be011e4 is the problem.

Sorry I still don't understand what you mean here and why you mention
the minor pagefault, could you explain again please?


("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area") of 64BIT. So,
when it met pud mapping on an MMU_SV39 machine, it caused the following:

    kexec_core: Starting new kernel
    Will call new kernel at 00300000 from hart id 0
    FDT image at 747c7000
    Bye...
    Unable to handle kernel paging request at virtual address ffffffda23b0d000
    Oops [#1]
    Modules linked in:
    CPU: 0 PID: 53 Comm: uinit Not tainted 6.4.0-rc6 #15
    Hardware name: Sophgo Mango (DT)
    epc : 0xffffffda23b0d000
     ra : machine_kexec+0xa6/0xb0
    epc : ffffffda23b0d000 ra : ffffffff80008272 sp : ffffffc80c173d10
     gp : ffffffff8150e1e0 tp : ffffffd9073d2c40 t0 : 0000000000000000
     t1 : 0000000000000042 t2 : 6567616d69205444 s0 : ffffffc80c173d50
     s1 : ffffffd9076c4800 a0 : ffffffd9076c4800 a1 : 0000000000300000
     a2 : 00000000747c7000 a3 : 0000000000000000 a4 : ffffffd800000000
     a5 : 0000000000000000 a6 : ffffffd903619c40 a7 : ffffffffffffffff
     s2 : ffffffda23b0d000 s3 : 0000000000300000 s4 : 00000000747c7000
     s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000
     s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
     s11: 0000003f940001a0 t3 : ffffffff815351af t4 : ffffffff815351af
     t5 : ffffffff815351b0 t6 : ffffffc80c173b50
    status: 0000000200000100 badaddr: ffffffda23b0d000 cause: 000000000000000c

Yes, Using set_memory_x API after boot has the limitation, and at least we
should synchronize the current->active_mm to fix the problem.

Fixes: d3ab332a5021 ("riscv: add ARCH_HAS_SET_MEMORY support")
Signed-off-by: Guo Ren <guoren@xxxxxxxxxxxxxxxxx>
Signed-off-by: Guo Ren <guoren@xxxxxxxxxx>
---
    arch/riscv/mm/pageattr.c | 7 +++++++
    1 file changed, 7 insertions(+)

diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c
index ea3d61de065b..23d169c4ee81 100644
--- a/arch/riscv/mm/pageattr.c
+++ b/arch/riscv/mm/pageattr.c
@@ -123,6 +123,13 @@ static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask,
                                     &masks);
        mmap_write_unlock(&init_mm);

+     if (current->active_mm != &init_mm) {
+             mmap_write_lock(current->active_mm);
+             ret =  walk_page_range_novma(current->active_mm, start, end,
+                                          &pageattr_ops, NULL, &masks);
+             mmap_write_unlock(current->active_mm);
+     }
+
        flush_tlb_kernel_range(start, end);

        return ret;
I don't understand: any page table inherits the entries of
swapper_pg_dir (see pgd_alloc()), so any kernel page table entry is
"automatically" synchronized, so why should we synchronize one 4K entry
explicitly? A PGD entry would need to be synced, but not a PTE entry.
The purpose of the second walk_page_range_novma() is for pgd's entries
synchronization. I'm a bit lazy here, I agree, it's unnecessary to
write lower level entries again. So I would use a simple pgd entries
synchronization from vmalloc_fault in the next version of patch, all
right?

But vmalloc_fault was removed by commit 7d3332be011e4 for CONFIG_64BIT,
so I don't get it: why would we need to synchronize a PGD entry in your
case? Where does this new PGD come from? And the trap address is
ffffffda23b0d000, which lies in the direct mapping, so why do you
mention vmalloc_fault at all?
The machine_kexec() uses set_memory_x to modify the direct mapping
attributes from RW to RWX. But set_memory_x only changes the init_mm's
attributes, not current->active_mm, so when kexec jumps into
control_buffer, the instruction page fault happens, and there is no
minor_pagefault for it, then panic.

I found the bug on an MMU_sv39 machine, and the direct mapping used a
1GB PUD, the pgd entries. This patch could solve the problem by
synchronizing a PGD entry between init_mm and current->active_mm.


Ok I get it now, thanks. So a few thoughts:

- the trap address is in the linear mapping, so there won't be any sync in the trap handler. Even if we implemented such behavior, waiting for a fault to synchronize those mappings is error-prone (see commit 7d3332be011e4)

- this is Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")

- that only happens if we use the largest mapping possible size for the current mode: one simple solution is to restrict to the second largest size (2MB for sv39, 1GB for sv48, 512GB for sv57).

- your solution only works in this case, but we should fix the larger problem: we need to sync all the page tables if such things happen, not just the "calling" one.

- set_memory* changing the protection of a whole PUD mapping for a single page is a problem: if we set_memory_ro() a single page, we end up with a 1GB linear mapping set to read only (which will obviously be problematic!)

- can we really use set_memory* on the direct mapping? Maybe we should simply not, and the solution is to fix machine_kexec() so it remaps this page outside the linear mapping.

- at the moment, we do not deal with the linear mapping in set_memory* (for example, when used with modules, we protect the module mapping in the vmalloc region but don't do anything with its linear mapping alias, I have that on my todo list for a moment now).

The best very short-term solution to me is to restrict to the second largest size (easy to hack that in best_map_size()).

And to me the long term solution is to split those mappings: that fixes all the issues mentioned above + the thing with the modules (but I have to dig a bit more, no other archs seems to do that).

That's interesting, thanks for bringing that up, let me know what you think, I'll keep digging!

Alex



Sorry if I'm missing something, hope you can clarify things!

Thanks,

Alex



--
Best Regards
   Guo Ren

_______________________________________________
linux-riscv mailing list
linux-riscv@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-riscv





[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux