Re: [PATCH v6 5/6] fbdev: Move framebuffer I/O helpers into <asm/fb.h>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-05-11 14:35, Geert Uytterhoeven wrote:
Hi Arnd,

CC Artur, who's working on HP Jornada 680.
Thanks for CC'ing me - I faced this exact issue while working on my
(still not upstreamed) hd6446x PCMCIA controller driver. The PCMCIA
subsystem uses `inb/outb`, which expect the `sh_io_port_base` to be set
to something else than the default `-1`. At first I tried to set it to
`0xa0000000`, so that all I/O goes through the fixed, non-cacheable P2
area. That however broke some other driver code (I had no time to debug
which one). Eventually I ended up taking a suggestion from a MIPS PCMCIA
driver [1] and simply substract the broken `sh_io_port_base` address
from `HD64461_IOBASE`, as the base for `socket.io_offset`. This way all
the PCMCIA `inb/outb` accesses are absolute, no matter what the
`sh_io_port_base` is set to. This of course is a very ugly solution and
we should instead fix the root cause of this mess. I will have a better
look at this patch set and the problem at hand at a later date.

Cheers,
Artur

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/pcmcia/db1xxx_ss.c?h=v6.4-rc1#n527


On Wed, May 10, 2023 at 5:55 PM Arnd Bergmann <arnd@xxxxxxxx> wrote:
On Wed, May 10, 2023, at 16:27, Thomas Zimmermann wrote:
> Am 10.05.23 um 16:15 schrieb Arnd Bergmann:
>> On Wed, May 10, 2023, at 16:03, kernel test robot wrote:

>> I think that's a preexisting bug and I have no idea what the
>> correct solution is. Looking for HD64461 shows it being used
>> both with inw/outw and readw/writew, so there is no way to have
>> the correct type. The sh __raw_readw() definition hides this bug,
>> but that is a problem with arch/sh and it probably hides others
>> as well.
>
> The constant HD64461_IOBASE is defined as integer at
>
>
> https://elixir.bootlin.com/linux/latest/source/arch/sh/include/asm/hd64461.h#L17
>
> but fb_readw() expects a volatile-void pointer. I guess we could add a
> cast somewhere to silence the problem. In the current upstream code,
> that appears to be done by sh's __raw_readw() internally:
>
>
> https://elixir.bootlin.com/linux/latest/source/arch/sh/include/asm/io.h#L35

Sure, that would make it build again, but that still doesn't make the
code correct, since it's completely unclear what base address the
HD64461_IOBASE is relative to. The hp6xx platform code only passes it
through inw()/outw(), which take an offset relative to sh_io_port_base,
but that is not initialized on hp6xx. I tried to find in the history
when it broke, apparently that was in 2007 commit 34a780a0afeb ("sh:
hp6xx pata_platform support."), which removed the custom inw/outw
implementations.

See also commit 4aafae27d0ce73f8 ("sh: hd64461 tidying."), which
claims they are no longer needed.

Don't the I/O port macros just treat the port as an absolute base address
when sh_io_port_base isn't set?

Gr{oetje,eeting}s,

                        Geert





[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux