Re: Current LKMM patch disposition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 03, 2023 at 08:28:35PM -0500, Alan Stern wrote:
> On Fri, Feb 03, 2023 at 04:48:43PM -0800, Paul E. McKenney wrote:
> > Hello!
> > 
> > Here is what I currently have for LKMM patches:
> > 
> > 289e1c89217d4 ("locking/memory-barriers.txt: Improve documentation for writel() example")
> > ebd50e2947de9 ("tools: memory-model: Add rmw-sequences to the LKMM")
> > aae0c8a50d6d3 ("Documentation: Fixed a typo in atomic_t.txt")
> > 9ba7d3b3b826e ("tools: memory-model: Make plain accesses carry dependencies")
> > 
> > 	Queued for the upcoming (v6.3) merge window.
> > 
> > c7637e2a8a27 ("tools/memory-model: Update some warning labels")
> > 7862199d4df2 ("tools/memory-model: Unify UNLOCK+LOCK pairings to po-unlock-lock-")
> > 
> > 	Are ready for the next (v6.4) merge window.  If there is some
> > 	reason that they should instead go into v6.3, please let us
> > 	all know.
> > 
> > a6cd5214b5ba ("tools/memory-model: Document LKMM test procedure")
> > 
> > 	This goes onto the lkmm-dev pile because it is documenting how
> > 	to use those scripts.
> > 
> > https://lore.kernel.org/lkml/Y9GPVnK6lQbY6vCK@xxxxxxxxxxxxxxxxxxx/
> > https://lore.kernel.org/lkml/20230126134604.2160-3-jonas.oberhauser@xxxxxxxxxxxxxxx
> > https://lore.kernel.org/lkml/20230203201913.2555494-1-joel@xxxxxxxxxxxxxxxxx/
> > 5d871b280e7f ("tools/memory-model: Add smp_mb__after_srcu_read_unlock()")
> > 
> > 	These need review and perhaps further adjustment.
> > 
> > So, am I missing any?  Are there any that need to be redirected?
> 
> The "Provide exact semantics for SRCU" patch should have:
> 
> 	Portions suggested by Boqun Feng and Jonas Oberhauser.
> 
> added at the end, together with your Reported-by: tag.  With that, I 
> think it can be queued for 6.4.

Thank you!  Does the patch shown below work for you?

(I have tentatively queued this, but can easily adjust or replace it.)

							Thanx, Paul

------------------------------------------------------------------------

tools/memory-model: Provide exact SRCU semantics

LKMM has long provided only approximate handling of SRCU read-side
critical sections.  This has not been a pressing problem because LKMM's
traditional handling is correct for the common cases of non-overlapping
and properly nested critical sections.  However, LKMM's traditional
handling of partially overlapping critical sections incorrectly fuses
them into one large critical section.

For example, consider the following litmus test:

------------------------------------------------------------------------

C C-srcu-nest-5

(*
 * Result: Sometimes
 *
 * This demonstrates non-nested overlapping of SRCU read-side critical
 * sections.  Unlike RCU, SRCU critical sections do not unconditionally
 * nest.
 *)

{}

P0(int *x, int *y, struct srcu_struct *s1)
{
        int r1;
        int r2;
        int r3;
        int r4;

        r3 = srcu_read_lock(s1);
        r2 = READ_ONCE(*y);
        r4 = srcu_read_lock(s1);
        srcu_read_unlock(s1, r3);
        r1 = READ_ONCE(*x);
        srcu_read_unlock(s1, r4);
}

P1(int *x, int *y, struct srcu_struct *s1)
{
        WRITE_ONCE(*y, 1);
        synchronize_srcu(s1);
        WRITE_ONCE(*x, 1);
}

locations [0:r1]
exists (0:r1=1 /\ 0:r2=0)

------------------------------------------------------------------------

Current mainline incorrectly flattens the two critical sections into
one larger critical section, giving "Never" instead of the correct
"Sometimes":

------------------------------------------------------------------------

$ herd7 -conf linux-kernel.cfg C-srcu-nest-5.litmus
Test C-srcu-nest-5 Allowed
States 3
0:r1=0; 0:r2=0;
0:r1=0; 0:r2=1;
0:r1=1; 0:r2=1;
No
Witnesses
Positive: 0 Negative: 3
Flag srcu-bad-nesting
Condition exists (0:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-5 Never 0 3
Time C-srcu-nest-5 0.01
Hash=e692c106cf3e84e20f12991dc438ff1b

------------------------------------------------------------------------

To its credit, it does complain about bad nesting.  But with this
commit we get the following result, which has the virtue of being
correct:

------------------------------------------------------------------------

$ herd7 -conf linux-kernel.cfg C-srcu-nest-5.litmus
Test C-srcu-nest-5 Allowed
States 4
0:r1=0; 0:r2=0;
0:r1=0; 0:r2=1;
0:r1=1; 0:r2=0;
0:r1=1; 0:r2=1;
Ok
Witnesses
Positive: 1 Negative: 3
Condition exists (0:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-5 Sometimes 1 3
Time C-srcu-nest-5 0.05
Hash=e692c106cf3e84e20f12991dc438ff1b

------------------------------------------------------------------------

In addition, there are new srcu_down_read() and srcu_up_read()
functions on their way to mainline.  Roughly speaking, these are to
srcu_read_lock() and srcu_read_unlock() as down() and up() are to
mutex_lock() and mutex_unlock().  The key point is that
srcu_down_read() can execute in one process and the matching
srcu_up_read() in another, as shown in this litmus test:

------------------------------------------------------------------------

C C-srcu-nest-6

(*
 * Result: Never
 *
 * This would be valid for srcu_down_read() and srcu_up_read().
 *)

{}

P0(int *x, int *y, struct srcu_struct *s1, int *idx, int *f)
{
        int r2;
        int r3;

        r3 = srcu_down_read(s1);
        WRITE_ONCE(*idx, r3);
        r2 = READ_ONCE(*y);
        smp_store_release(f, 1);
}

P1(int *x, int *y, struct srcu_struct *s1, int *idx, int *f)
{
        int r1;
        int r3;
        int r4;

        r4 = smp_load_acquire(f);
        r1 = READ_ONCE(*x);
        r3 = READ_ONCE(*idx);
        srcu_up_read(s1, r3);
}

P2(int *x, int *y, struct srcu_struct *s1)
{
        WRITE_ONCE(*y, 1);
        synchronize_srcu(s1);
        WRITE_ONCE(*x, 1);
}

locations [0:r1]
filter (1:r4=1)
exists (1:r1=1 /\ 0:r2=0)

------------------------------------------------------------------------

When run on current mainline, this litmus test gets a complaint about
an unknown macro srcu_down_read().  With this commit:

------------------------------------------------------------------------

herd7 -conf linux-kernel.cfg C-srcu-nest-6.litmus
Test C-srcu-nest-6 Allowed
States 3
0:r1=0; 0:r2=0; 1:r1=0;
0:r1=0; 0:r2=1; 1:r1=0;
0:r1=0; 0:r2=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (1:r1=1 /\ 0:r2=0)
Observation C-srcu-nest-6 Never 0 3
Time C-srcu-nest-6 0.02
Hash=c1f20257d052ca5e899be508bedcb2a1

------------------------------------------------------------------------

Note that the user must supply the flag "f" and the "filter" clause,
similar to what must be done to emulate call_rcu().

The commit works by treating srcu_read_lock()/srcu_down_read() as
loads and srcu_read_unlock()/srcu_up_read() as stores.  This allows us
to determine which unlock matches which lock by looking for a data
dependency between them.  In order for this to work properly, the data
dependencies have to be tracked through stores to intermediate
variables such as "idx" in the litmus test above; this is handled by
the new carry-srcu-data relation.  But it's important here (and in the
existing carry-dep relation) to avoid tracking the dependencies
through SRCU unlock stores.  Otherwise, in situations resembling:

	A: r1 = srcu_read_lock(s);
	B: srcu_read_unlock(s, r1);
	C: r2 = srcu_read_lock(s);
	D: srcu_read_unlock(s, r2);

it would look as if D was dependent on both A and C, because "s" would
appear to be an intermediate variable written by B and read by C.
This explains the complications in the definitions of carry-srcu-dep
and carry-dep.

As a debugging aid, the commit adds a check for errors in which the
value returned by one call to srcu_read_lock()/srcu_down_read() is
passed to more than one instance of srcu_read_unlock()/srcu_up_read().

Finally, since these SRCU-related primitives are now treated as
ordinary reads and writes, we have to add them into the lists of
marked accesses (i.e., not subject to data races) and lock-related
accesses (i.e., one shouldn't try to access an srcu_struct with a
non-lock-related primitive such as READ_ONCE() or a plain write).

Portions of this approach were suggested by Boqun Feng and Jonas
Oberhauser.

[ paulmck: Fix space-before-tab whitespace nit. ]

Reported-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

---

 tools/memory-model/linux-kernel.bell |   17 +++++------------
 tools/memory-model/linux-kernel.def  |    6 ++++--
 tools/memory-model/lock.cat          |    6 +++---
 3 files changed, 12 insertions(+), 17 deletions(-)

Index: usb-devel/tools/memory-model/linux-kernel.bell
===================================================================
--- usb-devel.orig/tools/memory-model/linux-kernel.bell
+++ usb-devel/tools/memory-model/linux-kernel.bell
@@ -57,20 +57,13 @@ flag ~empty Rcu-lock \ domain(rcu-rscs)
 flag ~empty Rcu-unlock \ range(rcu-rscs) as unmatched-rcu-unlock
 
 (* Compute matching pairs of nested Srcu-lock and Srcu-unlock *)
-let srcu-rscs = let rec
-	    unmatched-locks = Srcu-lock \ domain(matched)
-	and unmatched-unlocks = Srcu-unlock \ range(matched)
-	and unmatched = unmatched-locks | unmatched-unlocks
-	and unmatched-po = ([unmatched] ; po ; [unmatched]) & loc
-	and unmatched-locks-to-unlocks =
-		([unmatched-locks] ; po ; [unmatched-unlocks]) & loc
-	and matched = matched | (unmatched-locks-to-unlocks \
-		(unmatched-po ; unmatched-po))
-	in matched
+let carry-srcu-data = (data ; [~ Srcu-unlock] ; rf)*
+let srcu-rscs = ([Srcu-lock] ; carry-srcu-data ; data ; [Srcu-unlock]) & loc
 
 (* Validate nesting *)
 flag ~empty Srcu-lock \ domain(srcu-rscs) as unmatched-srcu-lock
 flag ~empty Srcu-unlock \ range(srcu-rscs) as unmatched-srcu-unlock
+flag ~empty (srcu-rscs^-1 ; srcu-rscs) \ id as multiple-srcu-matches
 
 (* Check for use of synchronize_srcu() inside an RCU critical section *)
 flag ~empty rcu-rscs & (po ; [Sync-srcu] ; po) as invalid-sleep
@@ -80,11 +73,11 @@ flag ~empty different-values(srcu-rscs)
 
 (* Compute marked and plain memory accesses *)
 let Marked = (~M) | IW | Once | Release | Acquire | domain(rmw) | range(rmw) |
-		LKR | LKW | UL | LF | RL | RU
+		LKR | LKW | UL | LF | RL | RU | Srcu-lock | Srcu-unlock
 let Plain = M \ Marked
 
 (* Redefine dependencies to include those carried through plain accesses *)
-let carry-dep = (data ; rfi)*
+let carry-dep = (data ; [~ Srcu-unlock] ; rfi)*
 let addr = carry-dep ; addr
 let ctrl = carry-dep ; ctrl
 let data = carry-dep ; data
Index: usb-devel/tools/memory-model/linux-kernel.def
===================================================================
--- usb-devel.orig/tools/memory-model/linux-kernel.def
+++ usb-devel/tools/memory-model/linux-kernel.def
@@ -49,8 +49,10 @@ synchronize_rcu() { __fence{sync-rcu}; }
 synchronize_rcu_expedited() { __fence{sync-rcu}; }
 
 // SRCU
-srcu_read_lock(X)  __srcu{srcu-lock}(X)
-srcu_read_unlock(X,Y) { __srcu{srcu-unlock}(X,Y); }
+srcu_read_lock(X) __load{srcu-lock}(*X)
+srcu_read_unlock(X,Y) { __store{srcu-unlock}(*X,Y); }
+srcu_down_read(X) __load{srcu-lock}(*X)
+srcu_up_read(X,Y) { __store{srcu-unlock}(*X,Y); }
 synchronize_srcu(X)  { __srcu{sync-srcu}(X); }
 synchronize_srcu_expedited(X)  { __srcu{sync-srcu}(X); }
 
Index: usb-devel/tools/memory-model/lock.cat
===================================================================
--- usb-devel.orig/tools/memory-model/lock.cat
+++ usb-devel/tools/memory-model/lock.cat
@@ -36,9 +36,9 @@ let RU = try RU with emptyset
 (* Treat RL as a kind of LF: a read with no ordering properties *)
 let LF = LF | RL
 
-(* There should be no ordinary R or W accesses to spinlocks *)
-let ALL-LOCKS = LKR | LKW | UL | LF | RU
-flag ~empty [M \ IW] ; loc ; [ALL-LOCKS] as mixed-lock-accesses
+(* There should be no ordinary R or W accesses to spinlocks or SRCU structs *)
+let ALL-LOCKS = LKR | LKW | UL | LF | RU | Srcu-lock | Srcu-unlock | Sync-srcu
+flag ~empty [M \ IW \ ALL-LOCKS] ; loc ; [ALL-LOCKS] as mixed-lock-accesses
 
 (* Link Lock-Reads to their RMW-partner Lock-Writes *)
 let lk-rmw = ([LKR] ; po-loc ; [LKW]) \ (po ; po)




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux