RE: [PATCH 2/6] x86/tdx: Retry TDVMCALL_MAP_GPA() when needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dexuan Cui <decui@xxxxxxxxxxxxx> Sent: Tuesday, November 22, 2022 7:27 PM
> 
> > From: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx>
> > Sent: Monday, November 21, 2022 4:01 PM
> > [...]
> > On Mon, Nov 21, 2022 at 11:51:47AM -0800, Dexuan Cui wrote:
> > [...]
> > I'm not convinced it deserves a separate helper for one user.
> > Does it look that ugly if tdx_map_gpa() uses __tdx_hypercall() directly?
> 
> Will use __tdx_hypercall() directly.
> 
> > >  /* Called from __tdx_hypercall() for unrecoverable failure */
> > >  void __tdx_hypercall_failed(void)
> > >  {
> > > @@ -691,6 +712,43 @@ static bool try_accept_one(phys_addr_t *start,
> > unsigned long len,
> > >  	return true;
> > >  }
> > >
> > > +/*
> > > + * Notify the VMM about page mapping conversion. More info about ABI
> > > + * can be found in TDX Guest-Host-Communication Interface (GHCI),
> > > + * section "TDG.VP.VMCALL<MapGPA>"
> > > + */
> > > +static bool tdx_map_gpa(phys_addr_t start, phys_addr_t end, bool enc)
> > > +{
> > > +	u64 ret, r11;
> > > +
> > > +	while (1) {
> >
> > Endless? Maybe an upper limit if no progress?
> 
> I'll add a max count of 1000, which should be far more than enough.
> 
> > > +		ret = _tdx_hypercall_output_r11(TDVMCALL_MAP_GPA, start,
> > > +						end - start, 0, 0, &r11);
> > > +		if (!ret)
> > > +			break;
> > > +
> > > +		if (ret != TDVMCALL_STATUS_RETRY)
> > > +			break;
> > > +
> > > +		/*
> > > +		 * The guest must retry the operation for the pages in the
> > > +		 * region starting at the GPA specified in R11. Make sure R11
> > > +		 * contains a sane value.
> > > +		 */
> > > +		if ((r11 & ~cc_mkdec(0)) < (start & ~cc_mkdec(0)) ||
> > > +		    (r11 & ~cc_mkdec(0)) >= (end  & ~cc_mkdec(0)))
> > > +			return false;
> >
> > Emm. All of them suppose to have shared bit set, why not compare directly
> > without cc_mkdec() dance?
> 
> The above code is unnecessary and will be removed.
> 
> So, I'll use the below in v2:
> 
> /*
>  * Notify the VMM about page mapping conversion. More info about ABI
>  * can be found in TDX Guest-Host-Communication Interface (GHCI),
>  * section "TDG.VP.VMCALL<MapGPA>"
>  */
> static bool tdx_map_gpa(phys_addr_t start, phys_addr_t end, bool enc)
> {
>         int max_retry_cnt = 1000, retry_cnt = 0;
>         struct tdx_hypercall_args args;
>         u64 map_fail_paddr, ret;
> 
>         while (1) {
>                 args.r10 = TDX_HYPERCALL_STANDARD;
>                 args.r11 = TDVMCALL_MAP_GPA;
>                 args.r12 = start;
>                 args.r13 = end - start;
>                 args.r14 = 0;
>                 args.r15 = 0;
> 
>                 ret = __tdx_hypercall(&args, TDX_HCALL_HAS_OUTPUT);
>                 if (!ret)
>                         break;

The above test is redundant and can be removed.  The "success" case is
implicitly handled by the test below for != TDVMCALL_STATUS_RETRY.

> 
>                 if (ret != TDVMCALL_STATUS_RETRY)
>                         break;
>                 /*
>                  * The guest must retry the operation for the pages in the
>                  * region starting at the GPA specified in R11. Make sure R11
>                  * contains a sane value.
>                  */
>                 map_fail_paddr = args.r11 ;
>                 if (map_fail_paddr < start || map_fail_paddr >= end)
>                         return false;
> 
>                 if (map_fail_paddr == start) {
>                         retry_cnt++;
>                         if (retry_cnt > max_retry_cnt)
>                                 return false;
>                 } else {
>                         retry_cnt = 0;;
>                         start = map_fail_paddr;

Just summarizing the code, we increment the retry count if the hypercall
returns STATUS_RETRY but did nothing (i.e., map_fail_paddr == start).  But
if the hypercall returns STATUS_RETRY after making at least some progress,
then we reset the retry count.   So in the worst case, for example, if the
hypercall processed only one page on each invocation, the loop will continue
until completion, without hitting any retry limits.  That scenario seems
plausible and within the spec.

Do we have any indication about the likelihood of the "RETRY but did
nothing" case?   The spec doesn't appear to disallow this case, but does
Hyper-V actually do this?  It seems like a weird case.

Michael

>                 }
>         }
> 
>         return !ret;
> }




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux