+CC linux-arch, Al Viro
On 9/21/22 14:43, Chris Stillson wrote:
From: Greentime Hu <greentime.hu@xxxxxxxxxx>
This patch adds sigcontext save/restore for vector. The vector registers
will be saved in datap pointer. The datap pointer will be allocated
dynamically when the task needs in kernel space. The datap pointer will
be set right after the __riscv_v_state data structure to save all the
vector registers in the signal handler stack.
Co-developed-by: Vincent Chen <vincent.chen@xxxxxxxxxx>
Signed-off-by: Vincent Chen <vincent.chen@xxxxxxxxxx>
Signed-off-by: Greentime Hu <greentime.hu@xxxxxxxxxx>
---
arch/riscv/include/uapi/asm/sigcontext.h | 24 ++++
arch/riscv/kernel/asm-offsets.c | 2 +
arch/riscv/kernel/signal.c | 165 ++++++++++++++++++++++-
3 files changed, 187 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/include/uapi/asm/sigcontext.h b/arch/riscv/include/uapi/asm/sigcontext.h
index 84f2dfcfdbce..b8a0fd7d7cfc 100644
--- a/arch/riscv/include/uapi/asm/sigcontext.h
+++ b/arch/riscv/include/uapi/asm/sigcontext.h
@@ -8,6 +8,23 @@
#include <asm/ptrace.h>
+/* The Magic number for signal context frame header. */
+#define RVV_MAGIC 0x53465457
+#define END_MAGIC 0x0
+
+/* The size of END signal context header. */
+#define END_HDR_SIZE 0x0
+
+struct __riscv_ctx_hdr {
+ __u32 magic;
+ __u32 size;
+};
+
+struct __sc_riscv_v_state {
+ struct __riscv_ctx_hdr head;
+ struct __riscv_v_state v_state;
+} __attribute__((aligned(16)));
+
/*
* Signal context structure
*
@@ -17,6 +34,13 @@
struct sigcontext {
struct user_regs_struct sc_regs;
union __riscv_fp_state sc_fpregs;
+ /*
+ * 4K + 128 reserved for vector state and future expansion.
+ * This space is enough to store the vector context whose VLENB
+ * is less or equal to 128.
+ * (The size of the vector context is 4144 byte as VLENB is 128)
At first glace it seems this only supports 128 byte V regs. Better to
add some words saying that wider reg file is handled in code too.
+ */
+ __u8 __reserved[4224] __attribute__((__aligned__(16)));
Is alignment of 8 not enough or is this future-proofing.
diff --git a/arch/riscv/kernel/asm-offsets.c b/arch/riscv/kernel/asm-offsets.c
index 37e3e6a8d877..80316ef7bb78 100644
--- a/arch/riscv/kernel/asm-offsets.c
+++ b/arch/riscv/kernel/asm-offsets.c
@@ -75,6 +75,8 @@ void asm_offsets(void)
OFFSET(TSK_STACK_CANARY, task_struct, stack_canary);
#endif
+ OFFSET(RISCV_V_STATE_MAGIC, __riscv_ctx_hdr, magic);
+ OFFSET(RISCV_V_STATE_SIZE, __riscv_ctx_hdr, size);
OFFSET(RISCV_V_STATE_VSTART, __riscv_v_state, vstart);
OFFSET(RISCV_V_STATE_VL, __riscv_v_state, vl);
OFFSET(RISCV_V_STATE_VTYPE, __riscv_v_state, vtype);
diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c
index 38b05ca6fe66..41d9a02c7098 100644
--- a/arch/riscv/kernel/signal.c
+++ b/arch/riscv/kernel/signal.c
@@ -20,15 +20,16 @@
#include <asm/csr.h>
extern u32 __user_rt_sigreturn[2];
+static size_t rvv_sc_size;
#define DEBUG_SIG 0
struct rt_sigframe {
struct siginfo info;
- struct ucontext uc;
#ifndef CONFIG_MMU
u32 sigreturn_code[2];
#endif
+ struct ucontext uc;
};
Just for the record this is NOT a userspace abi change (for SA_SIGINFO
signal handlers in userspace) since they are only provided struct
ucontext pointer. kernel is free to rearrange stuff in struct
rt_sigframe as it deems fits.
#ifdef CONFIG_FPU
@@ -85,16 +86,155 @@ static long save_fp_state(struct pt_regs *regs,
#define restore_fp_state(task, regs) (0)
#endif
+#ifdef CONFIG_VECTOR
+static long restore_v_state(struct pt_regs *regs, void **sc_reserved_ptr)
For ease of reading I would move save before restore.
+{
+ long err;
+ struct __sc_riscv_v_state __user *state = (struct __sc_riscv_v_state *)(*sc_reserved_ptr);
+ void *datap;
+ __u32 magic;
+ __u32 size;
+
+ /* Get magic number and check it. */
+ err = __get_user(magic, &state->head.magic);
+ err = __get_user(size, &state->head.size);
+ if (unlikely(err))
+ return err;
+
+ if (magic != RVV_MAGIC || size != rvv_sc_size)
+ return -EINVAL;
+
+ /* Copy everything of __sc_riscv_v_state except datap. */
+ err = __copy_from_user(¤t->thread.vstate, &state->v_state,
+ RISCV_V_STATE_DATAP);
+ if (unlikely(err))
+ return err;
+
+ /* Copy the pointer datap itself. */
+ err = __get_user(datap, &state->v_state.datap);
+ if (unlikely(err))
+ return err;
+
+
+ /* Copy the whole vector content from user space datap. */
+ err = __copy_from_user(current->thread.vstate.datap, datap, riscv_vsize);
+ if (unlikely(err))
+ return err;
+
+ vstate_restore(current, regs);
+
+ /* Move sc_reserved_ptr to point the next signal context frame. */
+ *sc_reserved_ptr += size;
+
+ return err;
+}
+
+static long save_v_state(struct pt_regs *regs, void **sc_reserved_free_ptr)
+{
+ /*
+ * Put __sc_riscv_v_state to the user's signal context space pointed
+ * by sc_reserved_free_ptr and the datap point the address right
+ * after __sc_riscv_v_state.
+ */
+ struct __sc_riscv_v_state __user *state = (struct __sc_riscv_v_state *)
+ (*sc_reserved_free_ptr);
+ void *datap = state + 1;
+ long err;
+
+ *sc_reserved_free_ptr += rvv_sc_size;
+
+ err = __put_user(RVV_MAGIC, &state->head.magic);
+ err = __put_user(rvv_sc_size, &state->head.size);
Can we copy these markers *after* the actual context is succesfully
copied. What if it fails (user stack can't grow anymore etc), then we
leave this half cooked state on stack.
Granted the process would most likely be killed anyways in such case.
+
+ vstate_save(current, regs);
+ /* Copy everything of vstate but datap. */
+ err = __copy_to_user(&state->v_state, ¤t->thread.vstate,
+ RISCV_V_STATE_DATAP);
+ if (unlikely(err))
+ return err;
+
+ /* Copy the pointer datap itself. */
+ err = __put_user(datap, &state->v_state.datap);
+ if (unlikely(err))
+ return err;
+
+ /* Copy the whole vector content to user space datap. */
+ err = __copy_to_user(datap, current->thread.vstate.datap, riscv_vsize);
+
+ return err;
+}
+#else
+#define save_v_state(task, regs) (0)
+#define restore_v_state(task, regs) (0)
+#endif
+
static long restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc)
{
long err;
+ void *sc_reserved_ptr = sc->__reserved;
/* sc_regs is structured the same as the start of pt_regs */
err = __copy_from_user(regs, &sc->sc_regs, sizeof(sc->sc_regs));
/* Restore the floating-point state. */
if (has_fpu())
err |= restore_fp_state(regs, &sc->sc_fpregs);
+
+ while (1 && !err) {
+ __u32 magic, size;
+ struct __riscv_ctx_hdr *head = (struct __riscv_ctx_hdr *)sc_reserved_ptr;
+
+ err |= __get_user(magic, &head->magic);
+ err |= __get_user(size, &head->size);
+ if (err)
+ goto done;
+
+ switch (magic) {
+ case 0:
+ if (size)
+ goto invalid;
+ goto done;
+ case RVV_MAGIC:
+ if (!has_vector())
+ goto invalid;
+ if (size != rvv_sc_size)
+ goto invalid;
+ err |= restore_v_state(regs, &sc_reserved_ptr);
+ break;
See question below. Is this 2 pass header check due to Vector or for
some future extension ?
+ default:
+ goto invalid;
+ }
+ }
+done:
return err;
+
+invalid:
+ return -EINVAL;
+}
+
+static size_t cal_rt_frame_size(void)
+{
+ struct rt_sigframe __user *frame;
+ static size_t frame_size;
+ size_t total_context_size = 0;
+ size_t sc_reserved_size = sizeof(frame->uc.uc_mcontext.__reserved);
Perhaps nit-picking, but "sc_reserved_size" and such names are
confusing. Its ok to call the mcontext field __reserved but in rest of
code lets avoid reserved - plain sctxt or some such will suffice.
+
+ if (frame_size)
+ goto done;
+
+ frame_size = sizeof(*frame);
+
+ if (has_vector())
+ total_context_size += rvv_sc_size;
+ /* Preserved a __riscv_ctx_hdr for END signal context header. */
+ total_context_size += sizeof(struct __riscv_ctx_hdr);
+
+ if (total_context_size > sc_reserved_size)
+ frame_size += (total_context_size - sc_reserved_size);
+
+ frame_size = round_up(frame_size, 16);
+done:
+ return frame_size;
This seems to be a one time computation, given we are checking a static
frame_size everytime, could we just calculate this once in
init_rt_signal_env() below in a now file scoped static variable ?
+
}
SYSCALL_DEFINE0(rt_sigreturn)
@@ -103,13 +243,14 @@ SYSCALL_DEFINE0(rt_sigreturn)
struct rt_sigframe __user *frame;
struct task_struct *task;
sigset_t set;
+ size_t frame_size = cal_rt_frame_size();
/* Always make any pending restarted system calls return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
frame = (struct rt_sigframe __user *)regs->sp;
- if (!access_ok(frame, sizeof(*frame)))
+ if (!access_ok(frame, frame_size))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
@@ -142,11 +283,20 @@ static long setup_sigcontext(struct rt_sigframe __user *frame,
{
struct sigcontext __user *sc = &frame->uc.uc_mcontext;
long err;
+ void *sc_reserved_free_ptr = sc->__reserved;
+
/* sc_regs is structured the same as the start of pt_regs */
err = __copy_to_user(&sc->sc_regs, regs, sizeof(sc->sc_regs));
/* Save the floating-point state. */
if (has_fpu())
err |= save_fp_state(regs, &sc->sc_fpregs);
+ /* Save the vector state. */
+ if (has_vector())
+ err |= save_v_state(regs, &sc_reserved_free_ptr);
+
+ /* Put END __riscv_ctx_hdr at the end. */
+ err = __put_user(END_MAGIC, &((struct __riscv_ctx_hdr *)sc_reserved_free_ptr)->magic);
+ err = __put_user(END_HDR_SIZE, &((struct __riscv_ctx_hdr *)sc_reserved_free_ptr)->size);
I really don't understand the need for this trailing header stuff. Is
this due to variable sized vector or enginnering for a yet to be
invented future extension's state.
But if so, won't we add a new ctx_hdr + magic for "foo" when that
happens. After all we were not doing this for existing FP stuff, granted
FP is all fixed size.
For Vector: magic+size tuple should be enough to identify/locate the ctx
info.
return err;
}
@@ -178,9 +328,10 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
{
struct rt_sigframe __user *frame;
long err = 0;
+ size_t frame_size = cal_rt_frame_size();
- frame = get_sigframe(ksig, regs, sizeof(*frame));
- if (!access_ok(frame, sizeof(*frame)))
+ frame = get_sigframe(ksig, regs, frame_size);
+ if (!access_ok(frame, frame_size))
return -EFAULT;
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
@@ -326,3 +477,9 @@ asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
if (thread_info_flags & _TIF_NOTIFY_RESUME)
resume_user_mode_work(regs);
}
+
+void init_rt_signal_env(void);
+void __init init_rt_signal_env(void)
+{
+ rvv_sc_size = sizeof(struct __sc_riscv_v_state) + riscv_vsize;
See above, should be precompute the output of cal_rt_frame_size() here too.
