On Fri, Apr 29, 2022 at 03:50:27PM +0200, Niklas Schnelle wrote: > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends > not being declared. We thus need to add HAS_IOPORT as dependency for > those drivers using them. > > Co-developed-by: Arnd Bergmann <arnd@xxxxxxxxxx> > Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx> > --- > drivers/media/pci/dm1105/Kconfig | 2 +- > drivers/media/radio/Kconfig | 14 +++++++++++++- > drivers/media/rc/Kconfig | 6 ++++++ For drivers/media/rc/Kconfig: Reviewed-by: Sean Young <sean@xxxxxxxx> Sean > 3 files changed, 20 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig > index e0e3af67c99c..4498c37f4990 100644 > --- a/drivers/media/pci/dm1105/Kconfig > +++ b/drivers/media/pci/dm1105/Kconfig > @@ -1,7 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0-only > config DVB_DM1105 > tristate "SDMC DM1105 based PCI cards" > - depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT > + depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT && HAS_IOPORT > select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT > select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT > select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT > diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig > index cca03bd2cc42..e15d50d9161f 100644 > --- a/drivers/media/radio/Kconfig > +++ b/drivers/media/radio/Kconfig > @@ -15,7 +15,7 @@ if RADIO_ADAPTERS > > config RADIO_MAXIRADIO > tristate "Guillemot MAXI Radio FM 2000 radio" > - depends on PCI > + depends on PCI && HAS_IOPORT > select RADIO_TEA575X > help > Choose Y here if you have this radio card. This card may also be > @@ -232,6 +232,7 @@ source "drivers/media/radio/wl128x/Kconfig" > menuconfig V4L_RADIO_ISA_DRIVERS > bool "ISA radio devices" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > help > Say Y here to enable support for these ISA drivers. > > @@ -240,6 +241,7 @@ if V4L_RADIO_ISA_DRIVERS > config RADIO_AZTECH > tristate "Aztech/Packard Bell Radio" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have one of these FM radio cards, and then fill > @@ -260,6 +262,7 @@ config RADIO_AZTECH_PORT > config RADIO_CADET > tristate "ADS Cadet AM/FM Tuner" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > help > Choose Y here if you have one of these AM/FM radio cards, and then > fill in the port address below. > @@ -270,6 +273,7 @@ config RADIO_CADET > config RADIO_GEMTEK > tristate "GemTek Radio card (or compatible) support" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have this FM radio card, and then fill in the > @@ -309,6 +313,7 @@ config RADIO_GEMTEK_PROBE > > config RADIO_ISA > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > tristate > > config RADIO_MIROPCM20 > @@ -329,6 +334,7 @@ config RADIO_MIROPCM20 > config RADIO_RTRACK > tristate "AIMSlab RadioTrack (aka RadioReveal) support" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have one of these FM radio cards, and then fill > @@ -383,6 +389,7 @@ config RADIO_RTRACK_PORT > config RADIO_SF16FMI > tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > help > Choose Y here if you have one of these FM radio cards. > > @@ -392,6 +399,7 @@ config RADIO_SF16FMI > config RADIO_SF16FMR2 > tristate "SF16-FMR2/SF16-FMD2 Radio" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_TEA575X > help > Choose Y here if you have one of these FM radio cards. > @@ -402,6 +410,7 @@ config RADIO_SF16FMR2 > config RADIO_TERRATEC > tristate "TerraTec ActiveRadio ISA Standalone" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have this FM radio card. > @@ -416,6 +425,7 @@ config RADIO_TERRATEC > config RADIO_TRUST > tristate "Trust FM radio card" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > This is a driver for the Trust FM radio cards. Say Y if you have > @@ -439,6 +449,7 @@ config RADIO_TRUST_PORT > config RADIO_TYPHOON > tristate "Typhoon Radio (a.k.a. EcoRadio)" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have one of these FM radio cards, and then fill > @@ -473,6 +484,7 @@ config RADIO_TYPHOON_PORT > config RADIO_ZOLTRIX > tristate "Zoltrix Radio" > depends on ISA || COMPILE_TEST > + depends on HAS_IOPORT > select RADIO_ISA > help > Choose Y here if you have one of these FM radio cards, and then fill > diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig > index f560fc38895f..96528e6532fd 100644 > --- a/drivers/media/rc/Kconfig > +++ b/drivers/media/rc/Kconfig > @@ -148,6 +148,7 @@ if RC_DEVICES > config IR_ENE > tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" > depends on PNP || COMPILE_TEST > + depends on HAS_IOPORT > help > Say Y here to enable support for integrated infrared receiver > /transceiver made by ENE. > @@ -161,6 +162,7 @@ config IR_ENE > config IR_FINTEK > tristate "Fintek Consumer Infrared Transceiver" > depends on PNP || COMPILE_TEST > + depends on HAS_IOPORT > help > Say Y here to enable support for integrated infrared receiver > /transceiver made by Fintek. This chip is found on assorted > @@ -249,6 +251,7 @@ config IR_IMON_RAW > config IR_ITE_CIR > tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" > depends on PNP || COMPILE_TEST > + depends on HAS_IOPORT > help > Say Y here to enable support for integrated infrared receivers > /transceivers made by ITE Tech Inc. These are found in > @@ -301,6 +304,7 @@ config IR_MTK > config IR_NUVOTON > tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" > depends on PNP || COMPILE_TEST > + depends on HAS_IOPORT > help > Say Y here to enable support for integrated infrared receiver > /transceiver made by Nuvoton (formerly Winbond). This chip is > @@ -345,6 +349,7 @@ config IR_RX51 > > config IR_SERIAL > tristate "Homebrew Serial Port Receiver" > + depends on HAS_IOPORT > help > Say Y if you want to use Homebrew Serial Port Receivers and > Transceivers. > @@ -412,6 +417,7 @@ config IR_TTUSBIR > config IR_WINBOND_CIR > tristate "Winbond IR remote control" > depends on (X86 && PNP) || COMPILE_TEST > + depends on HAS_IOPORT > select NEW_LEDS > select LEDS_CLASS > select BITREVERSE > -- > 2.32.0
