[PATCH v3 2/4] lazy tlb: allow lazy tlb mm switching to be configurable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add CONFIG_MMU_LAZY_TLB which can be configured out to disable the lazy
tlb mechanism entirely, and switches to init_mm when switching to a
kernel thread.

NOMMU systems could easily go without this and save a bit of code and
the refcount atomics, because their mm switch is a no-op. They have not
been switched over by default because the arch code needs to be audited
and tested for lazy tlb mm refcounting and converted to _lazy_tlb
refcounting if necessary.

CONFIG_MMU_LAZY_TLB_REFCOUNT is also added, but it must always be
enabled if CONFIG_MMU_LAZY_TLB is enabled until the next patch which
provides an alternate scheme.

Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
---
 arch/Kconfig             | 26 ++++++++++++++
 include/linux/sched/mm.h | 13 +++++--
 kernel/sched/core.c      | 75 ++++++++++++++++++++++++++++++----------
 kernel/sched/sched.h     |  4 ++-
 4 files changed, 96 insertions(+), 22 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index c45b770d3579..276e1c1c0219 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -418,6 +418,32 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	  irqs disabled over activate_mm. Architectures that do IPI based TLB
 	  shootdowns should enable this.
 
+# Enable "lazy TLB", which means a user->kernel thread context switch does not
+# switch the mm to init_mm and the kernel thread takes a reference to the user
+# mm to provide its kernel mapping. This is how Linux has traditionally worked
+# (see Documentation/vm/active_mm.rst), for performance. Switching to and from
+# idle thread is a performance-critical case.
+#
+# If mm context switches are inexpensive or free (in the case of NOMMU) then
+# this could be disabled.
+#
+# It would make sense to have this depend on MMU, but need to audit and test
+# the NOMMU architectures for lazy mm refcounting first.
+config MMU_LAZY_TLB
+	def_bool y
+	depends on !NO_MMU_LAZY_TLB
+
+# This allows archs to disable MMU_LAZY_TLB. mmgrab/mmdrop in arch/ code has
+# to be audited and switched to _lazy_tlb postfix as necessary.
+config NO_MMU_LAZY_TLB
+	def_bool n
+
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# For now, this must be enabled if MMU_LAZY_TLB is enabled.
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on MMU_LAZY_TLB
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index bfd1baca5266..29e4638ad124 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -52,12 +52,21 @@ static inline void mmdrop(struct mm_struct *mm)
 /* Helpers for lazy TLB mm refcounting */
 static inline void mmgrab_lazy_tlb(struct mm_struct *mm)
 {
-	mmgrab(mm);
+	if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_REFCOUNT))
+		mmgrab(mm);
 }
 
 static inline void mmdrop_lazy_tlb(struct mm_struct *mm)
 {
-	mmdrop(mm);
+	if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_REFCOUNT)) {
+		mmdrop(mm);
+	} else {
+		/*
+		 * mmdrop_lazy_tlb must provide a full memory barrier, see the
+		 * membarrier comment finish_task_switch which relies on this.
+		 */
+		smp_mb();
+	}
 }
 
 /**
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e359c76ea2e2..299c3eb12b2b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4171,7 +4171,7 @@ static struct rq *finish_task_switch(struct task_struct *prev)
 	__releases(rq->lock)
 {
 	struct rq *rq = this_rq();
-	struct mm_struct *mm = rq->prev_mm;
+	struct mm_struct *mm = NULL;
 	long prev_state;
 
 	/*
@@ -4190,7 +4190,10 @@ static struct rq *finish_task_switch(struct task_struct *prev)
 		      current->comm, current->pid, preempt_count()))
 		preempt_count_set(FORK_PREEMPT_COUNT);
 
-	rq->prev_mm = NULL;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+	mm = rq->prev_lazy_mm;
+	rq->prev_lazy_mm = NULL;
+#endif
 
 	/*
 	 * A task struct has one reference for the use as "current".
@@ -4282,22 +4285,10 @@ asmlinkage __visible void schedule_tail(struct task_struct *prev)
 	calculate_sigpending();
 }
 
-/*
- * context_switch - switch to the new MM and the new thread's register state.
- */
-static __always_inline struct rq *
-context_switch(struct rq *rq, struct task_struct *prev,
-	       struct task_struct *next, struct rq_flags *rf)
+static __always_inline void
+context_switch_mm(struct rq *rq, struct task_struct *prev,
+	       struct task_struct *next)
 {
-	prepare_task_switch(rq, prev, next);
-
-	/*
-	 * For paravirt, this is coupled with an exit in switch_to to
-	 * combine the page table reload and the switch backend into
-	 * one hypercall.
-	 */
-	arch_start_context_switch(prev);
-
 	/*
 	 * kernel -> kernel   lazy + transfer active
 	 *   user -> kernel   lazy + mmgrab_lazy_tlb() active
@@ -4326,11 +4317,57 @@ context_switch(struct rq *rq, struct task_struct *prev,
 		switch_mm_irqs_off(prev->active_mm, next->mm, next);
 
 		if (!prev->mm) {                        // from kernel
-			/* will mmdrop_lazy_tlb() in finish_task_switch(). */
-			rq->prev_mm = prev->active_mm;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+			/* Will mmdrop_lazy_tlb() in finish_task_switch(). */
+			rq->prev_lazy_mm = prev->active_mm;
 			prev->active_mm = NULL;
+#else
+			/*
+			 * Without MMU_LAZY_REFCOUNT there is no lazy
+			 * tracking (because no rq->prev_lazy_mm) in
+			 * finish_task_switch, so no mmdrop_lazy_tlb(),
+			 * so no memory barrier for membarrier (see the
+			 * membarrier comment in finish_task_switch()).
+			 * Do it here.
+			 */
+			smp_mb();
+#endif
 		}
 	}
+}
+
+static __always_inline void
+context_switch_mm_nolazy(struct rq *rq, struct task_struct *prev,
+	       struct task_struct *next)
+{
+	if (!next->mm)
+		next->active_mm = &init_mm;
+	membarrier_switch_mm(rq, prev->active_mm, next->active_mm);
+	switch_mm_irqs_off(prev->active_mm, next->active_mm, next);
+	if (!prev->mm)
+		prev->active_mm = NULL;
+}
+
+/*
+ * context_switch - switch to the new MM and the new thread's register state.
+ */
+static __always_inline struct rq *
+context_switch(struct rq *rq, struct task_struct *prev,
+	       struct task_struct *next, struct rq_flags *rf)
+{
+	prepare_task_switch(rq, prev, next);
+
+	/*
+	 * For paravirt, this is coupled with an exit in switch_to to
+	 * combine the page table reload and the switch backend into
+	 * one hypercall.
+	 */
+	arch_start_context_switch(prev);
+
+	if (IS_ENABLED(CONFIG_MMU_LAZY_TLB))
+		context_switch_mm(rq, prev, next);
+	else
+		context_switch_mm_nolazy(rq, prev, next);
 
 	rq->clock_update_flags &= ~(RQCF_ACT_SKIP|RQCF_REQ_SKIP);
 
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index a189bec13729..0729cf19a987 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -961,7 +961,9 @@ struct rq {
 	struct task_struct	*idle;
 	struct task_struct	*stop;
 	unsigned long		next_balance;
-	struct mm_struct	*prev_mm;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+	struct mm_struct	*prev_lazy_mm;
+#endif
 
 	unsigned int		clock_update_flags;
 	u64			clock;
-- 
2.23.0




[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux