On Wed, Nov 18, 2020 at 4:39 PM Atish Patra <atish.patra@xxxxxxx> wrote: > > This series attempts to move the ARM64 numa implementation to common > code so that RISC-V can leverage that as well instead of reimplementing > it again. > > RISC-V specific bits are based on initial work done by Greentime Hu [1] but > modified to reuse the common implementation to avoid duplication. > > [1] https://lkml.org/lkml/2020/1/10/233 > > This series has been tested on qemu with numa enabled for both RISC-V & ARM64. > It would be great if somebody can test it on numa capable ARM64 hardware platforms. > This patch series doesn't modify the maintainers list for the common code (arch_numa) > as I am not sure if somebody from ARM64 community or Greg should take up the > maintainership. Ganapatrao was the original author of the arm64 version. > I would be happy to update that in the next revision once it is decided. > > # numactl --hardware > available: 2 nodes (0-1) > node 0 cpus: 0 1 2 3 > node 0 size: 486 MB > node 0 free: 470 MB > node 1 cpus: 4 5 6 7 > node 1 size: 424 MB > node 1 free: 408 MB > node distances: > node 0 1 > 0: 10 20 > 1: 20 10 > # numactl -show > policy: default > preferred node: current > physcpubind: 0 1 2 3 4 5 6 7 > cpubind: 0 1 > nodebind: 0 1 > membind: 0 1 > > The patches are also available at > https://github.com/atishp04/linux/tree/5.11_numa_unified_v5 > > For RISC-V, the following qemu series is a pre-requisite(already available in upstream) > https://patchwork.kernel.org/project/qemu-devel/list/?series=303313 > > Testing: > RISC-V: > Tested in Qemu and 2 socket OmniXtend FPGA. > > ARM64: > 2 socket kunpeng920 (4 nodes around 250G a node) > Tested-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Changes from v4->v5: > 1. Added by Acked-by & Reviewed-by tags. > 2. Swapped patch 1 & 2 in v4 version. > > Changes from v3->v4: > 1. Removed redundant duplicate header. > 2. Added Reviewed-by tags. > > Changes from v2->v3: > 1. Added Acked-by/Reviewed-by tags. > 2. Replaced asm/acpi.h with linux/acpi.h > 3. Defined arch_acpi_numa_init as static. > > Changes from v1->v2: > 1. Replaced ARM64 specific compile time protection with ACPI specific ones. > 2. Dropped common pcibus_to_node changes. Added required changes in RISC-V. > 3. Fixed few typos. > > Atish Patra (4): > arm64, numa: Change the numa init functions name to be generic > numa: Move numa implementation to common code > riscv: Separate memory init from paging init > riscv: Add numa support for riscv64 platform > > Greentime Hu (1): > riscv: Add support pte_protnone and pmd_protnone if > CONFIG_NUMA_BALANCING > > arch/arm64/Kconfig | 1 + > arch/arm64/include/asm/numa.h | 48 +---------------- > arch/arm64/kernel/acpi_numa.c | 12 ----- > arch/arm64/mm/Makefile | 1 - > arch/arm64/mm/init.c | 4 +- > arch/riscv/Kconfig | 31 ++++++++++- > arch/riscv/include/asm/mmzone.h | 13 +++++ > arch/riscv/include/asm/numa.h | 8 +++ > arch/riscv/include/asm/pci.h | 14 +++++ > arch/riscv/include/asm/pgtable.h | 21 ++++++++ > arch/riscv/kernel/setup.c | 11 +++- > arch/riscv/kernel/smpboot.c | 12 ++++- > arch/riscv/mm/init.c | 10 +++- > drivers/base/Kconfig | 6 +++ > drivers/base/Makefile | 1 + > .../mm/numa.c => drivers/base/arch_numa.c | 27 ++++++++-- > include/asm-generic/numa.h | 52 +++++++++++++++++++ > 17 files changed, 200 insertions(+), 72 deletions(-) > create mode 100644 arch/riscv/include/asm/mmzone.h > create mode 100644 arch/riscv/include/asm/numa.h > rename arch/arm64/mm/numa.c => drivers/base/arch_numa.c (96%) > create mode 100644 include/asm-generic/numa.h > > -- > 2.25.1 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-riscv Hey Palmer, I did not see this series in for-next. Let me know if you need anything else to be done for this series. -- Regards, Atish
