This series attempts to move the ARM64 numa implementation to common code so that RISC-V can leverage that as well instead of reimplementing it again. RISC-V specific bits are based on initial work done by Greentime Hu [1] but modified to reuse the common implementation to avoid duplication. [1] https://lkml.org/lkml/2020/1/10/233 This series has been tested on qemu with numa enabled for both RISC-V & ARM64. It would be great if somebody can test it on numa capable ARM64 hardware platforms. This patch series doesn't modify the maintainers list for the common code (arch_numa) as I am not sure if somebody from ARM64 community or Greg should take up the maintainership. Ganapatrao was the original author of the arm64 version. I would be happy to update that in the next revision once it is decided. # numactl --hardware available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 node 0 size: 486 MB node 0 free: 470 MB node 1 cpus: 4 5 6 7 node 1 size: 424 MB node 1 free: 408 MB node distances: node 0 1 0: 10 20 1: 20 10 # numactl -show policy: default preferred node: current physcpubind: 0 1 2 3 4 5 6 7 cpubind: 0 1 nodebind: 0 1 membind: 0 1 For RISC-V, the following qemu series is a pre-requisite(already available in upstream) to test the patches in Qemu and 2 socket OmniXtend FPGA. https://patchwork.kernel.org/project/qemu-devel/list/?series=303313 The patches are also available at https://github.com/atishp04/linux/tree/5.10_numa_unified_v3 There may be some minor conflicts with Mike's cleanup series [2] depending on the order in which these two series are being accepted. I can rebase on top his series if required. [2] https://lkml.org/lkml/2020/8/18/754 Changes from v2->v3: 1. Added Acked-by/Reviewed-by tags. 2. Replaced asm/acpi.h with linux/acpi.h 3. Defined arch_acpi_numa_init as static. Changes from v1->v2: 1. Replaced ARM64 specific compile time protection with ACPI specific ones. 2. Dropped common pcibus_to_node changes. Added required changes in RISC-V. 3. Fixed few typos. Atish Patra (4): numa: Move numa implementation to common code arm64, numa: Change the numa init functions name to be generic riscv: Separate memory init from paging init riscv: Add numa support for riscv64 platform Greentime Hu (1): riscv: Add support pte_protnone and pmd_protnone if CONFIG_NUMA_BALANCING arch/arm64/Kconfig | 1 + arch/arm64/include/asm/numa.h | 45 +---------------- arch/arm64/kernel/acpi_numa.c | 13 ----- arch/arm64/mm/Makefile | 1 - arch/arm64/mm/init.c | 4 +- arch/riscv/Kconfig | 31 +++++++++++- arch/riscv/include/asm/mmzone.h | 13 +++++ arch/riscv/include/asm/numa.h | 8 +++ arch/riscv/include/asm/pci.h | 14 ++++++ arch/riscv/include/asm/pgtable.h | 21 ++++++++ arch/riscv/kernel/setup.c | 11 ++++- arch/riscv/kernel/smpboot.c | 12 ++++- arch/riscv/mm/init.c | 10 +++- drivers/base/Kconfig | 6 +++ drivers/base/Makefile | 1 + .../mm/numa.c => drivers/base/arch_numa.c | 31 ++++++++++-- include/asm-generic/numa.h | 49 +++++++++++++++++++ 17 files changed, 201 insertions(+), 70 deletions(-) create mode 100644 arch/riscv/include/asm/mmzone.h create mode 100644 arch/riscv/include/asm/numa.h rename arch/arm64/mm/numa.c => drivers/base/arch_numa.c (95%) create mode 100644 include/asm-generic/numa.h -- 2.25.1
