From: Albert van der Linde <alinde@xxxxxxxxxx>
Add a failure injection capability to improve testing of fault-tolerance
in usages of user memory access functions.
Adds CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy
functions. By default functions are to either fail with -EFAULT or
return that no bytes were copied. To use partial copies (e.g.,
copy_from_user permits partial failures) the number of bytes not to copy
must be written to /sys/kernel/debug/fail_usercopy/failsize.
Signed-off-by: Albert van der Linde <alinde@xxxxxxxxxx>
---
.../fault-injection/fault-injection.rst | 64 ++++++++++++++++++
include/linux/fault-inject-usercopy.h | 20 ++++++
lib/Kconfig.debug | 7 ++
lib/Makefile | 1 +
lib/fault-inject-usercopy.c | 66 +++++++++++++++++++
5 files changed, 158 insertions(+)
create mode 100644 include/linux/fault-inject-usercopy.h
create mode 100644 lib/fault-inject-usercopy.c
diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst
index f850ad018b70..cf52eabde332 100644
--- a/Documentation/fault-injection/fault-injection.rst
+++ b/Documentation/fault-injection/fault-injection.rst
@@ -16,6 +16,10 @@ Available fault injection capabilities
injects page allocation failures. (alloc_pages(), get_free_pages(), ...)
+- fail_usercopy
+
+ injects failures in user memory access functions. (copy_from_user(), get_user(), ...)
+
- fail_futex
injects futex deadlock and uaddr fault errors.
@@ -138,6 +142,12 @@ configuration of fault-injection capabilities.
specifies the minimum page allocation order to be injected
failures.
+- /sys/kernel/debug/fail_usercopy/failsize:
+
+ specifies the error code to return or amount of bytes not to copy.
+ If set to 0 then -EFAULT is returned instead. Positive values can be
+ used to inject partial copies (copy_from_user(), ...)
+
- /sys/kernel/debug/fail_futex/ignore-private:
Format: { 'Y' | 'N' }
@@ -177,6 +187,7 @@ use the boot option::
failslab=
fail_page_alloc=
+ fail_usercopy=
fail_make_request=
fail_futex=
mmc_core.fail_request=<interval>,<probability>,<space>,<times>
@@ -383,6 +394,59 @@ allocation failure::
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
+
+Fail usercopy functions
+---------------------------------
+
+The following code fails the usercopy call in stat: copy_to_user is only
+partially completed.
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/sendfile.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+void inject_size()
+{
+ int fd = open("/sys/kernel/debug/fail_usercopy/failsize", O_RDWR);
+ char buf[16];
+ sprintf(buf, "%d", 60);
+ write(fd, buf, strlen(buf));
+}
+
+void inject_fault()
+{
+ int fd = open("/proc/thread-self/fail-nth", O_RDWR);
+ char buf[16];
+ sprintf(buf, "%d", 4);
+ write(fd, buf, strlen(buf));
+}
+
+int main()
+{
+ struct stat sb;
+ inject_size();
+ inject_fault();
+ stat(".", &sb);
+ printf("Stat error code: %d\n", errno);
+ printf("Last status change: %s", ctime(&sb.st_ctime));
+ printf("Last file access: %s", ctime(&sb.st_atime));
+ printf("Last file modification: %s", ctime(&sb.st_mtime));
+ return 0;
+}
+
+Example output:
+Stat error code: 14
+Last status change: Thu Jan 1 00:00:00 1970
+Last file access: Tue Aug 18 14:09:34 2020
+Last file modification: Sun Dec 12 00:19:57 2989041
+
Systematic faults using fail-nth
---------------------------------
diff --git a/include/linux/fault-inject-usercopy.h b/include/linux/fault-inject-usercopy.h
new file mode 100644
index 000000000000..95dad8ddb56f
--- /dev/null
+++ b/include/linux/fault-inject-usercopy.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This header provides a wrapper for partial failures on usercopy functions.
+ * For usage see Documentation/fault-injection/fault-injection.rst
+ */
+#ifndef __LINUX_FAULT_INJECT_USERCOPY_H__
+#define __LINUX_FAULT_INJECT_USERCOPY_H__
+
+#ifdef CONFIG_FAULT_INJECTION_USERCOPY
+
+long should_fail_usercopy(unsigned long n);
+
+#else
+
+static inline long should_fail_usercopy(unsigned long n) { return 0; }
+
+#endif /* CONFIG_FAULT_INJECTION_USERCOPY */
+
+#endif /* __LINUX_FAULT_INJECT_USERCOPY_H__ */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e068c3c7189a..bd0ec3ddb459 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1770,6 +1770,13 @@ config FAIL_PAGE_ALLOC
help
Provide fault-injection capability for alloc_pages().
+config FAULT_INJECTION_USERCOPY
+ bool "Fault injection capability for usercopy functions"
+ depends on FAULT_INJECTION
+ help
+ Provides fault-injection capability to inject failures and
+ partial copies in usercopy functions.
+
config FAIL_MAKE_REQUEST
bool "Fault-injection capability for disk IO"
depends on FAULT_INJECTION && BLOCK
diff --git a/lib/Makefile b/lib/Makefile
index a4a4c6864f51..18daad2bc606 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -207,6 +207,7 @@ obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
+obj-$(CONFIG_FAULT_INJECTION_USERCOPY) += fault-inject-usercopy.o
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
obj-$(CONFIG_NETDEV_NOTIFIER_ERROR_INJECT) += netdev-notifier-error-inject.o
diff --git a/lib/fault-inject-usercopy.c b/lib/fault-inject-usercopy.c
new file mode 100644
index 000000000000..c151e0817ca7
--- /dev/null
+++ b/lib/fault-inject-usercopy.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/fault-inject.h>
+#include <linux/fault-inject-usercopy.h>
+#include <linux/random.h>
+
+static struct {
+ struct fault_attr attr;
+ u32 failsize;
+} fail_usercopy = {
+ .attr = FAULT_ATTR_INITIALIZER,
+ .failsize = 0,
+};
+
+static int __init setup_fail_usercopy(char *str)
+{
+ return setup_fault_attr(&fail_usercopy.attr, str);
+}
+__setup("fail_usercopy=", setup_fail_usercopy);
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+static int __init fail_usercopy_debugfs(void)
+{
+ umode_t mode = S_IFREG | 0600;
+ struct dentry *dir;
+
+ dir = fault_create_debugfs_attr("fail_usercopy", NULL,
+ &fail_usercopy.attr);
+ if (IS_ERR(dir))
+ return PTR_ERR(dir);
+
+ debugfs_create_u32("failsize", mode, dir,
+ &fail_usercopy.failsize);
+ return 0;
+}
+
+late_initcall(fail_usercopy_debugfs);
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+/**
+ * should_fail_usercopy() - Failure code or amount of bytes not to copy.
+ * @n: Size of the original copy call.
+ *
+ * The general idea is to have a method which returns the amount of bytes not
+ * to copy, a failure to return, or 0 if the calling function should progress
+ * without a failure. E.g., copy_{to,from}_user should NOT copy the amount of
+ * bytes returned by should_fail_usercopy, returning this value (in addition
+ * to any bytes that could actually not be copied) or a failure.
+ *
+ * Return: one of:
+ * negative, failure to return;
+ * 0, progress normally;
+ * a number in ]0, n], the number of bytes not to copy.
+ *
+ */
+long should_fail_usercopy(unsigned long n)
+{
+ if (should_fail(&fail_usercopy.attr, n)) {
+ if (fail_usercopy.failsize > 0)
+ return fail_usercopy.failsize % (n + 1);
+ return -EFAULT;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(should_fail_usercopy);
--
2.28.0.297.g1956fa8f8d-goog
