Re: [PATCH v2 0/2] arm64: tlb: add support for TLBI RANGE instructions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020/7/14 0:59, Catalin Marinas wrote:
>> +config ARM64_TLBI_RANGE
>> +	bool "Enable support for tlbi range feature"
>> +	default y
>> +	depends on AS_HAS_TLBI_RANGE
>> +	help
>> +	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
>> +	  range of input addresses.
>> +
>> +	  The feature introduces new assembly instructions, and they were
>> +	  support when binutils >= 2.30.
> 
> It looks like 2.30. I tracked it down to this commit:
> 
> https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=793a194839bc8add71fdc7429c58b10f0667a6f6;hp=1a7ed57c840dcb0401f1a67c6763a89f7d2686d2
> 
>> +config AS_HAS_TLBI_RANGE
>> +	def_bool $(as-option, -Wa$(comma)-march=armv8.4-a)
>> +
>>  endmenu
> 
> The problem is that we don't pass -Wa,-march=armv8.4-a to gas. AFAICT,
> we only set an 8.3 for PAC but I'm not sure how passing two such options
> goes.
> 

Pass the -march twice may not have bad impact.  Test in my toolchains
and the newer one will be chosen.  Anyway, we can add judgment to avoid
them be passed at the same time.

> I'm slightly surprised that my toolchains (and yours) did not complain
> about these instructions. Looking at the binutils code, I think it
> should have complained if -march=armv8.4-a wasn't passed but works fine.
> I thought gas doesn't enable the maximum arch feature by default.
>> An alternative would be to check for a specific instruction (untested):
> 
> 	def_bool $(as-instr,tlbi rvae1is, x0)
> 
> but we need to figure out whether gas not requiring -march=armv8.4-a is
> a bug (which may be fixed) or that gas accepts all TLBI instructions.
> 

As you say in another email, this is a bug.  So we should pass -march=
armv8.4-a to gas if we use toolchains to generate tlbi range instructions.

But this bug only affects the compilation (cause WARNING or ERROR if not
pass -march-armv8.4-a when compiling) but not the judgment.

> A safer bet may be to simply encode the instructions by hand:
> 
> #define SYS_TLBI_RVAE1IS(Rt) \
> 	__emit_inst(0xd5000000 | sys_insn(1, 0, 8, 2, 1) | ((Rt) & 0x1f))
> #define SYS_TLBI_RVALE1IS(Rt) \
> 	__emit_inst(0xd5000000 | sys_insn(1, 0, 8, 2, 5) | ((Rt) & 0x1f))
> 
> (please check that they are correct)
> 

Currently in kernel, all tlbi instructions are passed through __tlbi()
and __tlbi_user(). If we encode the range instructions by hand, we may
should have to add a new mechanism for this:

1. choose a register and save it;
2. put the operations for tlbi range to the register;
3. do tlbi range by asm(SYS_TLBI_RVAE1IS(x0));
4. restore the value of the register.

It's complicated and will only be used with tlbi range instructions.
(Am I understand something wrong? )

So I am prefer to pass -march=armv8.4-a to toolschains to support tlbi
range instruction, just like what PAC does.

Thanks,
Zhenyu







[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux