And get rid of the generic sync_core_before_usermode facility.
This helper is the wrong way around I think. The idea that membarrier
state requires a core sync before returning to user is the easy one
that does not need hiding behind membarrier calls. The gap in core
synchronization due to x86's sysret/sysexit and lazy tlb mode, is the
tricky detail that is better put in x86 lazy tlb code.
Consider if an arch did not synchronize core in switch_mm either, then
membarrier_mm_sync_core_before_usermode would be in the wrong place
but arch specific mmu context functions would still be the right place.
There is also a exit_lazy_tlb case that is not covered by this call, which
could be a bugs (kthread use mm the membarrier process's mm then context
switch back to the process without switching mm or lazy mm switch).
This makes lazy tlb code a bit more modular.
Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
---
.../membarrier-sync-core/arch-support.txt | 6 +++-
arch/x86/include/asm/mmu_context.h | 35 +++++++++++++++++++
arch/x86/include/asm/sync_core.h | 28 ---------------
include/linux/sched/mm.h | 14 --------
include/linux/sync_core.h | 21 -----------
kernel/cpu.c | 4 ++-
kernel/kthread.c | 2 +-
kernel/sched/core.c | 16 ++++-----
8 files changed, 51 insertions(+), 75 deletions(-)
delete mode 100644 arch/x86/include/asm/sync_core.h
delete mode 100644 include/linux/sync_core.h
diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
index 52ad74a25f54..bd43fb1f5986 100644
--- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -5,6 +5,10 @@
#
# Architecture requirements
#
+# If your architecture returns to user-space through non-core-serializing
+# instructions, you need to ensure these are done in switch_mm and exit_lazy_tlb
+# (if lazy tlb switching is implemented).
+#
# * arm/arm64/powerpc
#
# Rely on implicit context synchronization as a result of exception return
@@ -24,7 +28,7 @@
# instead on write_cr3() performed by switch_mm() to provide core serialization
# after changing the current mm, and deal with the special case of kthread ->
# uthread (temporarily keeping current mm into active_mm) by issuing a
-# sync_core_before_usermode() in that specific case.
+# serializing instruction in exit_lazy_mm() in that specific case.
#
-----------------------
| arch |status|
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 255750548433..5263863a9be8 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -6,6 +6,7 @@
#include <linux/atomic.h>
#include <linux/mm_types.h>
#include <linux/pkeys.h>
+#include <linux/sched/mm.h>
#include <trace/events/tlb.h>
@@ -95,6 +96,40 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next)
#define enter_lazy_tlb enter_lazy_tlb
extern void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk);
+#ifdef CONFIG_MEMBARRIER
+/*
+ * Ensure that a core serializing instruction is issued before returning
+ * to user-mode, if a SYNC_CORE was requested. x86 implements return to
+ * user-space through sysexit, sysrel, and sysretq, which are not core
+ * serializing.
+ *
+ * See the membarrier comment in finish_task_switch as to why this is done
+ * in exit_lazy_tlb.
+ */
+#define exit_lazy_tlb exit_lazy_tlb
+static inline void exit_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+ /* Switching mm is serializing with write_cr3 */
+ if (tsk->mm != mm)
+ return;
+
+ if (likely(!(atomic_read(&mm->membarrier_state) &
+ MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)))
+ return;
+
+ /* With PTI, we unconditionally serialize before running user code. */
+ if (static_cpu_has(X86_FEATURE_PTI))
+ return;
+ /*
+ * Return from interrupt and NMI is done through iret, which is core
+ * serializing.
+ */
+ if (in_irq() || in_nmi())
+ return;
+ sync_core();
+}
+#endif
+
/*
* Init a new mm. Used on mm copies, like at fork()
* and on mm's that are brand-new, like at execve().
diff --git a/arch/x86/include/asm/sync_core.h b/arch/x86/include/asm/sync_core.h
deleted file mode 100644
index c67caafd3381..000000000000
--- a/arch/x86/include/asm/sync_core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_SYNC_CORE_H
-#define _ASM_X86_SYNC_CORE_H
-
-#include <linux/preempt.h>
-#include <asm/processor.h>
-#include <asm/cpufeature.h>
-
-/*
- * Ensure that a core serializing instruction is issued before returning
- * to user-mode. x86 implements return to user-space through sysexit,
- * sysrel, and sysretq, which are not core serializing.
- */
-static inline void sync_core_before_usermode(void)
-{
- /* With PTI, we unconditionally serialize before running user code. */
- if (static_cpu_has(X86_FEATURE_PTI))
- return;
- /*
- * Return from interrupt and NMI is done through iret, which is core
- * serializing.
- */
- if (in_irq() || in_nmi())
- return;
- sync_core();
-}
-
-#endif /* _ASM_X86_SYNC_CORE_H */
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 480a4d1b7dd8..9b026264b445 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -7,7 +7,6 @@
#include <linux/sched.h>
#include <linux/mm_types.h>
#include <linux/gfp.h>
-#include <linux/sync_core.h>
/*
* Routines for handling mm_structs
@@ -364,16 +363,6 @@ enum {
#include <asm/membarrier.h>
#endif
-static inline void membarrier_mm_sync_core_before_usermode(struct mm_struct *mm)
-{
- if (current->mm != mm)
- return;
- if (likely(!(atomic_read(&mm->membarrier_state) &
- MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)))
- return;
- sync_core_before_usermode();
-}
-
extern void membarrier_exec_mmap(struct mm_struct *mm);
#else
@@ -387,9 +376,6 @@ static inline void membarrier_arch_switch_mm(struct mm_struct *prev,
static inline void membarrier_exec_mmap(struct mm_struct *mm)
{
}
-static inline void membarrier_mm_sync_core_before_usermode(struct mm_struct *mm)
-{
-}
#endif
#endif /* _LINUX_SCHED_MM_H */
diff --git a/include/linux/sync_core.h b/include/linux/sync_core.h
deleted file mode 100644
index 013da4b8b327..000000000000
--- a/include/linux/sync_core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_SYNC_CORE_H
-#define _LINUX_SYNC_CORE_H
-
-#ifdef CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
-#include <asm/sync_core.h>
-#else
-/*
- * This is a dummy sync_core_before_usermode() implementation that can be used
- * on all architectures which return to user-space through core serializing
- * instructions.
- * If your architecture returns to user-space through non-core-serializing
- * instructions, you need to write your own functions.
- */
-static inline void sync_core_before_usermode(void)
-{
-}
-#endif
-
-#endif /* _LINUX_SYNC_CORE_H */
-
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 6ff2578ecf17..134688d79589 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -572,7 +572,9 @@ static int finish_cpu(unsigned int cpu)
/*
* idle_task_exit() will have switched to &init_mm, now
- * clean up any remaining active_mm state.
+ * clean up any remaining active_mm state. exit_lazy_tlb
+ * is not done, if an arch did any accounting in these
+ * functions it would have to be added.
*/
if (mm != &init_mm)
idle->active_mm = &init_mm;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index e813d92f2eab..6f93c649aa97 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1251,9 +1251,9 @@ void kthread_use_mm(struct mm_struct *mm)
finish_arch_post_lock_switch();
#endif
+ exit_lazy_tlb(active_mm, tsk);
if (active_mm != mm)
mmdrop(active_mm);
- exit_lazy_tlb(active_mm, tsk);
to_kthread(tsk)->oldfs = get_fs();
set_fs(USER_DS);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index debc917bc69b..31e22c79826c 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3294,22 +3294,19 @@ static struct rq *finish_task_switch(struct task_struct *prev)
kcov_finish_switch(current);
fire_sched_in_preempt_notifiers(current);
+
/*
* When switching through a kernel thread, the loop in
* membarrier_{private,global}_expedited() may have observed that
* kernel thread and not issued an IPI. It is therefore possible to
* schedule between user->kernel->user threads without passing though
- * switch_mm(). Membarrier requires a barrier after storing to
- * rq->curr, before returning to userspace, so provide them here:
- *
- * - a full memory barrier for {PRIVATE,GLOBAL}_EXPEDITED, implicitly
- * provided by mmdrop(),
- * - a sync_core for SYNC_CORE.
+ * switch_mm(). Membarrier requires a full barrier after storing to
+ * rq->curr, before returning to userspace, for
+ * {PRIVATE,GLOBAL}_EXPEDITED. This is implicitly provided by mmdrop().
*/
- if (mm) {
- membarrier_mm_sync_core_before_usermode(mm);
+ if (mm)
mmdrop(mm);
- }
+
if (unlikely(prev_state == TASK_DEAD)) {
if (prev->sched_class->task_dead)
prev->sched_class->task_dead(prev);
@@ -6292,6 +6289,7 @@ void idle_task_exit(void)
BUG_ON(current != this_rq()->idle);
if (mm != &init_mm) {
+ /* enter_lazy_tlb is not done because we're about to go down */
switch_mm(mm, &init_mm, current);
finish_arch_post_lock_switch();
}
--
2.23.0
