[PATCH v9 2/3] arm64: Define Documentation/arm64/tagged-address-abi.rst

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vincenzo Frascino <vincenzo.frascino@xxxxxxx>

On AArch64 the TCR_EL1.TBI0 bit is set by default, allowing userspace
(EL0) to perform memory accesses through 64-bit pointers with a non-zero
top byte. Introduce the document describing the relaxation of the
syscall ABI that allows userspace to pass certain tagged pointers to
kernel syscalls.

Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
Cc: Szabolcs Nagy <szabolcs.nagy@xxxxxxx>
Cc: Kevin Brodsky <kevin.brodsky@xxxxxxx>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@xxxxxxx>
Co-developed-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
---
 Documentation/arm64/tagged-address-abi.rst | 156 +++++++++++++++++++++
 1 file changed, 156 insertions(+)
 create mode 100644 Documentation/arm64/tagged-address-abi.rst

diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst
new file mode 100644
index 000000000000..d4a85d535bf9
--- /dev/null
+++ b/Documentation/arm64/tagged-address-abi.rst
@@ -0,0 +1,156 @@
+==========================
+AArch64 TAGGED ADDRESS ABI
+==========================
+
+Authors: Vincenzo Frascino <vincenzo.frascino@xxxxxxx>
+         Catalin Marinas <catalin.marinas@xxxxxxx>
+
+Date: 21 August 2019
+
+This document describes the usage and semantics of the Tagged Address
+ABI on AArch64 Linux.
+
+1. Introduction
+---------------
+
+On AArch64 the ``TCR_EL1.TBI0`` bit is set by default, allowing
+userspace (EL0) to perform memory accesses through 64-bit pointers with
+a non-zero top byte. This document describes the relaxation of the
+syscall ABI that allows userspace to pass certain tagged pointers to
+kernel syscalls.
+
+2. AArch64 Tagged Address ABI
+-----------------------------
+
+From the kernel syscall interface perspective and for the purposes of
+this document, a "valid tagged pointer" is a pointer with a potentially
+non-zero top-byte that references an address in the user process address
+space obtained in one of the following ways:
+
+- ``mmap()`` syscall where either:
+
+  - flags have the ``MAP_ANONYMOUS`` bit set or
+  - the file descriptor refers to a regular file (including those
+    returned by ``memfd_create()``) or ``/dev/zero``
+
+- ``brk()`` syscall (i.e. the heap area between the initial location of
+  the program break at process creation and its current location).
+
+- any memory mapped by the kernel in the address space of the process
+  during creation and with the same restrictions as for ``mmap()`` above
+  (e.g. data, bss, stack).
+
+The AArch64 Tagged Address ABI has two stages of relaxation depending
+how the user addresses are used by the kernel:
+
+1. User addresses not accessed by the kernel but used for address space
+   management (e.g. ``mmap()``, ``mprotect()``, ``madvise()``). The use
+   of valid tagged pointers in this context is always allowed.
+
+2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
+   relaxation is disabled by default and the application thread needs to
+   explicitly enable it via ``prctl()`` as follows:
+
+   - ``PR_SET_TAGGED_ADDR_CTRL``: enable or disable the AArch64 Tagged
+     Address ABI for the calling thread.
+
+     The ``(unsigned int) arg2`` argument is a bit mask describing the
+     control mode used:
+
+     - ``PR_TAGGED_ADDR_ENABLE``: enable AArch64 Tagged Address ABI.
+       Default status is disabled.
+
+     Arguments ``arg3``, ``arg4``, and ``arg5`` must be 0.
+
+   - ``PR_GET_TAGGED_ADDR_CTRL``: get the status of the AArch64 Tagged
+     Address ABI for the calling thread.
+
+     Arguments ``arg2``, ``arg3``, ``arg4``, and ``arg5`` must be 0.
+
+   The ABI properties described above are thread-scoped, inherited on
+   clone() and fork() and cleared on exec().
+
+   Calling ``prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0)``
+   returns ``-EINVAL`` if the AArch64 Tagged Address ABI is globally
+   disabled by ``sysctl abi.tagged_addr_disabled=1``. The default
+   ``sysctl abi.tagged_addr_disabled`` configuration is 0.
+
+When the AArch64 Tagged Address ABI is enabled for a thread, the
+following behaviours are guaranteed:
+
+- All syscalls except the cases mentioned in section 3 can accept any
+  valid tagged pointer.
+
+- The syscall behaviour is undefined for invalid tagged pointers: it may
+  result in an error code being returned, a (fatal) signal being raised,
+  or other modes of failure.
+
+- The syscall behaviour for a valid tagged pointer is the same as for
+  the corresponding untagged pointer.
+
+
+A definition of the meaning of tagged pointers on AArch64 can be found
+in Documentation/arm64/tagged-pointers.rst.
+
+3. AArch64 Tagged Address ABI Exceptions
+-----------------------------------------
+
+The following system call parameters must be untagged regardless of the
+ABI relaxation:
+
+- ``prctl()`` other than pointers to user data either passed directly or
+  indirectly as arguments to be accessed by the kernel.
+
+- ``ioctl()`` other than pointers to user data either passed directly or
+  indirectly as arguments to be accessed by the kernel.
+
+- ``shmat()`` and ``shmdt()``.
+
+Any attempt to use non-zero tagged pointers may result in an error code
+being returned, a (fatal) signal being raised, or other modes of
+failure.
+
+4. Example of correct usage
+---------------------------
+.. code-block:: c
+
+   #include <stdlib.h>
+   #include <string.h>
+   #include <unistd.h>
+   #include <sys/mman.h>
+   #include <sys/prctl.h>
+   
+   #define PR_SET_TAGGED_ADDR_CTRL	55
+   #define PR_TAGGED_ADDR_ENABLE	(1UL << 0)
+   
+   #define TAG_SHIFT		56
+   
+   int main(void)
+   {
+   	int tbi_enabled = 0;
+   	unsigned long tag = 0;
+   	char *ptr;
+   
+   	/* check/enable the tagged address ABI */
+   	if (!prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0))
+   		tbi_enabled = 1;
+   
+   	/* memory allocation */
+   	ptr = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE,
+   		   MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+   	if (ptr == MAP_FAILED)
+   		return 1;
+   
+   	/* set a non-zero tag if the ABI is available */
+   	if (tbi_enabled)
+   		tag = rand() & 0xff;
+   	ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT));
+   
+   	/* memory access to a tagged address */
+   	strcpy(ptr, "tagged pointer\n");
+   
+   	/* syscall with a tagged pointer */
+   	write(1, ptr, strlen(ptr));
+   
+   	return 0;
+   }



[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux