Re: use generic DMA mapping code in powerpc V4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Christoph,

I have found a small workaround. If I add 'mem=3500M' to the boot arguments then it detects the SATA hard disk and boots without any problems.

X5000> setenv bootargs root=/dev/sda2 console=ttyS0,115200 mem=3500M

Cheers,
Christian


On 19 January 2019 at 12:40PM, Christian Zigotzky wrote:
Hi Christoph,

I bought a USB null modem RS-232 serial cable today so I was able to get some SATA error messages.

Error messages:

[   13.468538] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[   13.475106] fsl-sata ffe220000.sata: failed to start port 0 (errno=-12)
[   13.481736] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[   13.488267] fsl-sata ffe221000.sata: failed to start port 0 (errno=-12)

---

errno=-12 = Out of memory

Please find attached the complete serial log.

Cheers,
Christian


On 18 January 2019 at 4:06PM, Christian Zigotzky wrote:
Hello Christoph,

I was able to compile 257002094bc5935dd63207a380d9698ab81f0775 from your Git powerpc-dma.6-debug today.

Unfortunately I don't see any error messages (kernel ring buffer) and I don't have a RS232 serial null modem cable to get them.

Cheers,
Christian







[Index of Archives]     [Linux Kernel]     [Kernel Newbies]     [x86 Platform Driver]     [Netdev]     [Linux Wireless]     [Netfilter]     [Bugtraq]     [Linux Filesystems]     [Yosemite Discussion]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux